Occurrence of the <Emphasis Type="Italic">cis</Emphasis>-4,7,10, <Emphasis Type="Italic">trans</Emphasis>-13-22:4 Fatty Acid in the Family Pectinidae (Mollusca: Bivalvia)

The present study aimed to elucidate the effective phylogenetic specificity of distribution of a cis-4,7,10, trans-13-22:4 (22:4(n-9)Δ13trans) among pectinids. For this purpose, we extended the analysis of membrane glycerophospholipids FA composition to 13 species of scallops, covering 11 genera and 7 tribes representatives of the three subfamilies Chlamydinae, Palliolinae and Pectininae and the subgroup Aequipecten. In species belonging to the subfamily Pectininae and the Aequipecten subgroup, 22:4(n-9)Δ13trans was found in substantial amounts, but it was absent in other species belonging to the subfamilies Chlamydinae and Palliolinae. Homologous non-methylene-interrupted (NMI) FA, also hypothesized to differ along phylogenetic lines in bivalves, were totally absent or present only in trace amounts in representatives of the Aequipecten subgroup but ranged from 0.3 to 4.5% of the total FA in Pectinidae, Chlamydinae, and Palliolinae subfamilies. The species-specific occurrence of NMI and 22:4(n-9)Δ13trans FA in membrane lipids of pectinids agrees with the most recent phylogenies based on shell morphology and molecular characteristics. We examined the potential timing of the appearance of 22:4(n-9)Δ13trans in pectinids on a geologic time scale.     

Association between calcium intake and colorectal neoplasia in Puerto Rican Hispanics

Epidemiological studies show that a high calcium intake reduces the risk of colon cancer. The objective was to study the association between calcium intake and colorectal neoplasia in a clinic-based sample of Hispanics adults from Puerto Rico. As part of this cross-sectional study, a total of 433 subjects were recruited from surgery and gastroenterology clinics at the University of Puerto Rico. Calcium intake was estimated using a food frequency questionnaire (FFQ) of calcium rich foods. Socio-demographics, health history and colonoscopy results were obtained from the primary study. Chi square and odds ratios (OR) for colorectal neoplasia (adenomas and/ or adenocarcinoma) were calculated for total calcium, dietary calcium and for calcium supplement use. In total, 312 (72%) from 433 participants completed the FFQ and had available colonoscopy results; from these, 196 (62.5%) were free of neoplasia and 117 (37.5%) had colorectal neoplasia. Colorectal neoplasia subjects were older, a lower proportion were females and less educated than those without neoplasia (p < 0.01). Total calcium intake (median 1180 mg/d) was greater in those free of neoplasia compared to colorectal neoplasia subjects (median 1036 mg/d; p<0.05). A high total calcium intake and the use of calcium supplements significantly reduced the OR (crude and age adjusted) for colorectal neoplasia; although these associations lost statistical significance after additionally adjusting for gender and educational level. In conclusion, a high calcium intake and the use of calcium supplements may be protective against colorectal neoplasia, although a greater sample may be required to observe significant associations in a multivariate model.     

Jet fires: An experimental study of the main geometrical features of the flame in subsonic and sonic regimes

Although jet fires are usually smaller than other fires, they may lead to a destructive chain of events that can increase the scale of an accident. Therefore, their size should be predicted for accurate risk assessment. In the literature, most of the proposals for estimating jet fire size concern small jet fires (up to 2.5 m in length) or subsonic flames. In this study, experiments on relatively large propane jet fires in still air were performed. Vertical turbulent diffusion flames up to 10 m in length, with sonic and subsonic mass flow rates, were obtained using six different orifice exit diameters. The experiments were filmed with video and thermographic cameras and the resulting visible and infrared images were used to determine flame length and lift‐off distance. Expressions for estimating jet length as a function of several variables (mass flow rate, orifice exit diameter, Froude and Reynolds numbers) are also proposed. © 2008 American Institute of Chemical Engineers AIChE J, 2009     

Development of a yellow ceramic pigment based on silver nanoparticles

In this study a yellow pigment was obtained for third-fire ceramic decorations, based on silver nanoparticles synthesised by the method of chemical reduction in aqueous phase, using silver nitrate and polyvinylpyrrolidone as raw materials. Monitoring of the nanoparticle synthesis reaction by UV–vis spectroscopy allowed optimum operating conditions to be defined in preparing these particles for use as chromophores. Under these conditions, a stable suspension of Ag nanoparticles, which were well dispersed and had an average diameter of 20–30 nm, was obtained. Polyvinyl alcohol and tetraethyl orthosilicate were then added to the nanoparticle suspension to obtain the pigment precursor. The pigment precursor was directly applied on to fired glazed ceramic tile. Subsequent thermal treatment at moderate temperature (700 °C) yielded a layer less than one micron thick, which generated an intense yellow colour.     

Characterization of nanofibrous carbon produced at pilot-scale in a fluidized bed reactor by methane decomposition

Carbon nanofibers (CNFs) production in the range of hundreds of grams per day has been achieved in a fluidized bed reactor (FBR) by methane decomposition using a nickel based catalyst. The characterization of the carbon produced at different operating conditions (temperature, space velocity and the ratio of gas flow velocity, u_o, to the minimum fluidization velocity, u_mf) has been accomplished by means of X-ray diffraction (XRD), N₂ adsorption, temperature-programmed oxidation (TPO), scanning electron microscope (SEM) and transmission electron microscopy (TEM). It has been concluded that the structural and textural properties of the CNFs obtained in the FBR are analogous to the ones obtained in a fixed bed reactor at a production scale two orders of magnitude lower. Thus, FBR can be envisaged as a promising reaction configuration for the catalytic decomposition of methane (CDM), allowing the production of high quantities of CNFs with desirable structural and textural properties.     

Effect of the addition of calcium soap to ewes’ diet on fatty acid composition of ewe milk and subcutaneous fat of suckling lambs reared on ewe milk

The aim of this work was to study the effect of the inclusion of calcium soap (CS) in ewes’ diet on the fatty acid profile of suckling lambs. Sixty suckling lambs of three breeds (Castellana, Churra and Assaf) were divided into two equal groups. One group was fed with a diet composed of beetroot pulp, alfalfa, barley, corn, soy, cotton and 4% of CS, and the other with a control diet without CS. The fatty acid profiles of the ewe’s milk samples collected on the day before slaughter and of the lamb subcutaneous fat collected from the back of the carcasses were analysed. The addition of calcium soap to the ewe’s diet did not change the milk fatty acid profile but significantly increased SFA and decreased both the PUFA and MUFA levels of suckling lamb fat. PCA analysis revealed a good separation of the lamb samples according to the diet of the mothers, showing that diet is more important than breed in explaining sample variability.     

Solving fecal coliform growth/reactivation in biosolids during full-scale post-digestion processes.

Fecal coliform recurrence has been observed at the City of Los Angeles Hyperion Treatment Plant during pilot-scale experiments with a designated thermophilic battery of six anaerobic digesters, while other digesters were still at a mesophilic temperature. Several lab and full-scale experiments indicated the following possible causes of the growth/reactivation of fecal coliforms in post-digestion: a) contamination of thermophilically digested biosolids with mesophilically digested biosolids; b) a large drop in the biosolids temperature between the centrifuges and silos, which could have allowed the reactivation and/or growth of fecal coliforms. These were resolved by the full plant conversion to thermophilic anaerobic digestion and design modifications of the post-digestion train.     

High-power AlGaN/GaN HEMTs for Ka-band applications

We report on the fabrication and high-frequency characterization of AlGaN/GaN high-electron mobility transistors (HEMTs) grown by molecular beam epitaxy (MBE) and metal-organic chemical vapor deposition (MOCVD). In devices with a gate length of 160 nm, a record power density of 10.5 W/mm with 34% power added efficiency (PAE) has been measured at 40 GHz in MOCVD-grown HEMTs biased at V/sub DS/=30 V. Under similar bias conditions, more than 8.6 W/mm, with 32% PAE, were obtained on the MBE-grown sample. The dependence of output power, gain, and PAE on gate and drain voltages, and frequency have also been analyzed.     

Deep-Learning-Enabled Fast Optical Identification and Characterization of 2D Materials

Advanced microscopy and/or spectroscopy tools play indispensable roles in nanoscience and nanotechnology research, as they provide rich information about material processes and properties. However, the interpretation of imaging data heavily relies on the “intuition” of experienced researchers. As a result, many of the deep graphical features obtained through these tools are often unused because of difficulties in processing the data and finding the correlations. Such challenges can be well addressed by deep learning. In this work, the optical characterization of 2D materials is used as a case study, and a neural-network-based algorithm is demonstrated for the material and thickness identification of 2D materials with high prediction accuracy and real-time processing capability. Further analysis shows that the trained network can extract deep graphical features such as contrast, color, edges, shapes, flake sizes, and their distributions, based on which an ensemble approach is developed to predict the most relevant physical properties of 2D materials. Finally, a transfer learning technique is applied to adapt the pretrained network to other optical identification applications. This artificial-intelligence-based material characterization approach is a powerful tool that would speed up the preparation, initial characterization of 2D materials and other nanomaterials, and potentially accelerate new material discoveries.     

Hybrid Plasmonic–Ferroelectric Architectures for Lasing and SHG Processes at the Nanoscale

Coherent light sources providing sub‐wavelength confined modes are in ever more demand to face new challenges in a variety of disciplines. Scalability and cost‐effective production of these systems are also highly desired. The use of ferroelectrics in functional optical platforms, on which plasmonic arrangements can be formed, is revealed as a simple and powerful method to develop coherent light sources with improved and novel functionalities at the nanoscale. Two types of sources with sub‐diffraction spatial confinement and improved performances are presented: i) plasmon‐assisted solid‐state nanolasers based on the interaction between metallic nanostructures and optically active rare earth doped ferroelectric crystals and ii) nonlinear radiation sources based on quadratic frequency mixing processes that are enhanced by means of localized surface plasmon (LSP) resonances. The mechanisms responsible for the intensification of the radiation–matter interaction processes by LSP resonances are discussed in each case. The challenges, potential applications, and future perspectives of the field are highlighted.