Flow patterns in granulating systems

Particle flow patterns were investigated for wet granulation and dry powder mixing in ploughshare mixers using Positron Emission Particle Tracking (PEPT). In a 4-l mixer, calcium carbonate with mean size 45 μm was granulated using a 50 wt.% solution of glycerol and water as binding fluid, and particle movement was followed using a 600-μm calcium hydroxy-phosphate tracer particle. In a 20-l mixer, dry powder flow was studied using a 600-μm resin bead tracer particle to simulate the bulk polypropylene powder with mean size 600 μm. Important differences were seen between particle flow patterns for wet and dry systems. Particle speed relative to blade speed was lower in the wet system than in the dry system, with the ratios of average particle speed to blade tip speed for all experiments in the range 0.01–0.25. In the axial plane, the same particle motion was observed around each blade; this provides a significant advance for modelling flow in ploughshare mixers. For the future, a detailed understanding of the local velocity, acceleration and density variations around a plough blade will reveal the effects of flow patterns in granulating systems on the resultant distribution of granular product attributes such as size, density and strength.     

Al2TiO5-ZrTiO4-ZrO2 Composites: A New Family of Low-Thermal-Expansion Ceramics

The characterization and properties of ceramic composites containing the phases Al₂TiO₅, ZrTiO₄, and ZrO₂ are described. The range of compositions investigated gives very low average thermal expansions (α_24–1000°C as low as −2.0 × 10⁻⁶°C⁻¹) and excellent high-temperature stability. The low thermal expansions are apparently due to a combination of microcracking by the titanate phases and a contractive phase transformation by the ZrO₂. The crystal chemistry and microstructure of the product are processing dependent. Although the composites represent a complex microcracking system, the low thermal expansions and high-temperature stability make them potential candidates for commercial applications requiring thermal shock resistance.     

Solvation of ions—XX. The ferrocene—ferricinium couple and its role in the estimation of free energies of transfer of single ions

The ferrocene-ferricinium electrode (Pt/Foc, Fic⁺) was investigated in water, acetonitrile, ethanol, DMSO and DMF using single scan cyclic voltammetry and phase sensitive ac polarography. The oxidation-reduction is pseudo-reversible in all five solvents with an electrochemical rate constant of approximately 10⁻² cm/s. In all solvents a slow irreversible chemical step involving the ferricinium cation follows electron transfer, so that slow cyclic voltammetry or polarography rather than potentiometry is preferred if ferrocene is to be used as a reference electrode in non-aqueous solvents.

The Strehlow assumption, ΔG_tr(Foc) = ΔG_tr(Fic⁺ gives very different free energies of transfer of single ions from non-aqueous solvents to water when compared with the TATB assumption that ΔG_tr(Ph₄As⁺) = ΔG_tr(Ph₄B⁻). This discrepancy is likely to be because ferricinium is only a moderately large cation, so that ΔG_tr(Fic⁺) is less positive than ΔG_tr(Foc) for transfer to water. The discrepancy is not because of abnormal electrochemical behavior of the Pt/Foc, Fic⁺ electrode in water or other solvents. Values of E° vs nhe, H₂O in a variety of solvents based on the TATB assumption are presented.     

Mechanical properties and transition temperatures of copolymers of N-n-alkylacrylamides and vinylidene chloride

Mechanical and solution properties, melting transitions, torsional stiffness temperatures, T_f, and selected modulus-temperature curves are presented for copolymers of the N-n-alkylacrylamides with vinylidene chloride. Copolymers were prepared at 60°C across the range of compositions, using as comonomers N-n-butyl-, octyl-, dodecyl- and oleyl-acrylamide, which have amorphous side-chains, and N-n-octadecyl acrylamide and n-octadecyl acrylate whose side-chains are crystalline. The mechanical properties reflected the effect of the decline in backbone crystallinity and the simultaneous development of strong intermolecular interactions in the amorphous stage. Copolymers were stiff or showed brittle failure across the compositional range except when intermolecular forces were reduced (with n-octadrcyl acrylate) and side-chain crystallization eliminated (with N-oleylacrylamide). These systems and the n-dodecylacrylamide copolymers had yield strengths less than brittle strengths and substantial elongations. Backbone crystallinity was eliminated at about 15 mole % amide and side-chain crystallinity vanished at less than 10 mole % of the amide in the N-n-octadecylacrylamide series. No depression in side-chain melting point occurred with dilution by segments of vinylidene chloride. Over-all decline in the flex-temperature was the normal monotonic function of composition except that values increased in magnitude at high vinylidene chloride contents, the effect presumably being caused by the presence of crystallinity. An empirical equation was developed which permitted the calculation of T_f for any N-n-alkylacrylamide composition with any number of carbon atoms in the side-chain, above 3.     

Viscosity index. I. Evaluation of selected copolymers incorporating n-octadecyl acrylate as viscosity index improvers

Compositionally and structurally varied copolymers all containing n-octadecyl acrylate were prepared and evaluated as viscosity index improvers in a common base oil under conditions of low shear. Systems evaluated over a range of copolymer and blend composition were: copolymers of n-octadecyl acrylate with, respectively, methyl methacrylate, 2-ethylhexyl acrylate, and n-dodecyl acrylate; and homopolymers of poly(n-octadecyl acrylate), prepared with a wide range of molecular weights. Properties were compared with those of blends of commercial methacrylate copolymers (acryloids) which had been freed of their entraining liquid. Mixtures of base oil with copolymers of n-octadecyl acrylate and methyl methacrylate, compared at fixed SAE viscosities, were the most efficient of all blends studied. They had the smallest rate of change of viscosity with temperature (as measured by their ASTM slopes), particularly in the composition region of incipient polymer precipitation at room temperature. Efficiency of certain of these composition was somewhat greater than that of the acryloids. A parameter that related concentration and weight-average molecular weight was used to correlate all of the data for ASTM slope and viscosity. Empirical relations developed by using this parameter enabled rheological data to be estimated that agree within 6% of experimental values for the case of thermodynamically good base oil solvents. These data demonstrated the relatively small contributions of copolymer structure to viscosity index improvement.     

Fabricating Strong and Stiff Bioplastics from Whole Spirulina Cells

Since the 1950s, 8.3 billion tonnes (Bt) of virgin plastics have been produced, of which around 5 Bt have accumulated as waste in oceans and other natural environments, posing severe threats to entire ecosystems. The need for sustainable bio-based alternatives to traditional petroleum-derived plastics is evident. Bioplastics produced from unprocessed biological materials have thus far suffered from heterogeneous and non-cohesive morphologies, which lead to weak mechanical properties and lack of processability, hindering their industrial integration. Here, a fast, simple, and scalable process is presented to transform raw microalgae into a self-bonded, recyclable, and backyard-compostable bioplastic with attractive mechanical properties surpassing those of other biobased plastics such as thermoplastic starch. Upon hot-pressing, the abundant and photosynthetic algae spirulina forms cohesive bioplastics with flexural modulus and strength in the range 3–5 GPa and 25.5–57 MPa, respectively, depending on pre-processing conditions and the addition of nanofillers. The machinability of these bioplastics, along with self-extinguishing properties, make them promising candidates for consumer plastics. Mechanical recycling and fast biodegradation in soil are demonstrated as end-of-life options. Finally, the environmental impacts are discussed in terms of global warming potential, highlighting the benefits of using a carbon-negative feedstock such as spirulina to fabricate plastics.     

Solution structure of glutathione bound to human glutathione transferase P1-1: comparison of NMR measurements with the crystal structure

The conformation of the bound glutathione (GSH) in the active site of the human glutathione transferase P1-1 (EC 2.5.1.18) has been studied by transferred NOE measurements and compared with those obtained by X-ray diffraction data. Two-dimensional TRNOESY and TRROESY experiments have been performed under fast-exchange conditions. The family of GSH conformers, compatible with TRNOE distance constraints, shows a backbone structure very similar to the crystal model. Interesting differences have been found in the side chain regions. After restrained energy minimization of a representative NMR conformer in the active site, the sulfur atom is not found in hydrogen-bonding distance of the hydroxyl group of Tyr 7. This situation is similar to the one observed in an "atypical" crystal complex grown at low pH and low temperature. The NMR conformers display also a poorly defined structure of the glutamyl moiety, and the presence of an unexpected intermolecular NOE could indicate a different interaction of this substrate portion with the G-site. The NMR data seem to provide a snapshot of GSH in a precomplex where the GSH glutamyl end is bound in a different fashion. The existence of this precomplex is supported by pre-steady-state kinetic experiments [Caccuri, A. M., Lo Bello, M., Nuccetelli, M., Nicotra, M., Rossi, P., Antonini, G., Federici, G., and Ricci, G. (1998) Biochemistry 37, 3028-3034] and preliminary time-resolved fluorescence data.     

Parametric Extension of the Classical Exposure-Schedule Theory for Angle-Multiplexed Photorefractive Recording over Wide Angles

The gradual reorientations in crystal geometry encountered during angle-multiplexed holographic recording with obliquely incident recording beams can create significant parametric exposure-time and recording-angle dependencies in both grating writing- and erasure-time constants. We present a parametric extension of the classically derived backward-recursion algorithm that compensates for the intermingling effects of recording geometry, writing-beam intensity variations, and unique crystal behavior. We present experimental data for a sequence of 301 holograms recorded with the goal of equal hologram strength and, separately, the same sequence recorded with the goal of equal hologram reconstruction intensity-which are different cases for a steeply incident readout beam.