Increased Activity of Cell Surface Peptidases in HeLa Cells Undergoing UV-Induced Apoptosis Is Not Mediated by Caspase 3

We have previously shown that in HeLa cells treated with a variety of agents there is an increase in cell surface peptidase (CSP) activity in those cells undergoing apoptosis. The increase in CSP activity observed in UVB-irradiated cells undergoing apoptosis was unaffected when the cultures were treated with the aminopeptidase inhibitor bestatin, and matrix metalloprotease inhibitor BB3103, but greatly enhanced when treated with the caspase 3 inhibitor-DEVD, and reduced in the presence of the poly(ADP-ribose) polymerase (PARP) inhibitor-3-aminobenzamide (3AB). Neither 3AB nor DEVD had an effect on the gross morphology of the apoptotic cells observed under electron microscopy, nor did they have an effect on phosphatidylserine eversion on the cell membrane, or that of PARP cleavage. All the agents except for DEVD had no effect on the level of caspase 3 activity in the cells. The results suggest that other caspases may cleave PARP in these cells. Both 3AB and DEVD treatment reduced the level of actin cleavage seen in the apoptotic cells. The increase in CSP activity observed in cells undergoing UVB-induced apoptosis appears to involve PARP but not caspase 3.     

Growth and branching of gold nanoparticles through mesoporous silica thin films

Composite materials made of mesoporous oxide thin films containing metallic nanoparticles are of high interest in various fields, including catalysis, biosensing and non-linear optics. We demonstrate in this work the fabrication of such composite materials containing a sub-monolayer of gold nanoparticles (GNPs) of various shapes covered with mesoporous silica thin films. Additionally, the shape of the GNPs (and thus their optical properties) can be modified in situ through seeded growth and branching. Such growth proceeds upon wetting with HAuCl(4) solution, a surfactant (cetyltrimethylammonium bromide, CTAB) and a mild reducing agent (ascorbic acid, AA). The effect of varying several reaction parameters (time and CTAB and AA concentrations) was evaluated, showing that more anisotropic particles are obtained at longer reaction times, lower CTAB concentration and higher AA concentration. The final shape of the GNPs was also found to depend on their initial shape and size, as well as the pore size of the mesoporous film covering them. Because the growth proceeds through the pores of the film, it may lead to shapes that are not easily obtained in solution, such as particles with branches on one side only. Finally, we have confirmed that no damage was induced to the mesoporous silica structure during the growth process and thus the final particles remain well covered by the thin film, which can eventually be used as a filter between the GNPs and the outer medium.     

A Facile and Green Microwave-Assisted Strategy to Induce Surface Properties on Complex-Shape Polymeric 3D Printed Structures

Light- induced polymeric 3D printing is becoming a well-established fabrication method, showing manifold advantages such as control of the local chemistry of the manufactured devices. It can be considered a green technology, since the parts are produced when needed and with minimum amount of materials. In this work 3D printing is combined with another green technology, microwave-assisted reaction, to fabricate objects of complex geometry with controllable surface properties, exploiting the presence of remaining functional groups on the surface of 3D printed specimens. In this context, surface functionalization with different amines is studied, optimizing formulations, reaction times, and avoiding surface deterioration. Then, two different applications are investigated. MW-functionalized filter-type structures have been tested against Staphylococcus aureus bacteria, showing high bactericidal activity on the surface along all areas of the complex-shaped structure. Second, a fluidic chip composed of three separated channels is 3D printed, filled with different amine-reactive dyes (dansyl and eosine derivatives), and made to react simultaneously. Complete and independent functionalization of the surface of the three channels is achieved only after 2 min of irradiation. This study demonstrates that light induced 3D printing and microwave-induced chemistry can be used together effectively, and used to produce functional devices.     

Increased globotriaosylceramide in familial dysautonomia

Familial Dysautonomia (FD) is an autosomal recessive disease of unknown etiology, occurring primarily in Ashkenazi Jews. Patients are neurologically impaired, with deficits primarily in autonomic and sensory functions. The biochemical and genetic defects have remained elusive, precluding carrier detection and prenatal diagnosis. High-performance liquid chromatography data indicated up to a threefold increase in the neutral glycosphingolipid globotriaosylceramide in Dysautonomic fibroblasts and lymphoblasts. Total ganglioside values, measured by colorimetric, fluorometric or specific sodium borohydride incorporation, were decreased. Affected fibroblasts exhibited a range of pleomorphic phenotypes, such that the usual swirl-like confluent growth pattern of normal fibroblasts was distorted to varying degrees, suggesting abnormalities in the FD plasma membrane, possibly affecting cell-cell contacts. The glycosphingolipid increase could not be accounted for on the basis of markedly decreased α-galactosidase activity, as in Fabry's disease, where patients also display decreased autonomic function.     

Controlling the phase stability of polymer blends through the introduction of impenetrable interfaces

In this work, the effect of the introduction of modified solid surfaces into polymer blends on the phase‐separation process was investigated. Glass fibers with surfaces having different chemistries were introduced into polystyrene–poly(methyl methacrylate) blends. The glass fibers used either had fully hydrated surfaces or had surfaces covered with a random copolymer, poly(styrene‐co‐methyl methacrylate). The copolymer was synthesized by free‐radical polymerization of styrene and methyl methacrylate in the presence of previously vinyl silane‐treated glass fibers. The copolymerization and grafting procedures were investigated by FTIR and thermal analysis. Blends containing the fibers were studied using FTIR microscopy and optical microscopy. FTIR microscopy results showed that the composition of the phases in the blends was shifted by using fibers with different surface chemistries. Fibers with grafted copolymers were capable of narrowing the immiscibility region in the phase diagram, while fully hydrated fibers were able to expand the gap. It was proposed that interfacial interactions regulated by a hydrophilic–hydrophobic type of forces were responsible for guiding the described phase‐separation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1619–1627, 2003     

Oxygen vacancies as a link between the grain growth and grain boundary conductivity anomalies in titanium-rich strontium titanate

Titanium-rich (Sr/Ti?=?0.995) strontium titanate (ST) ceramics, air-sintered in a temperature range of 1400–1625?°C, were reported to possess anomalies in the grain growth and analogous anomalies in the grain boundary (GB) conductivity activation energy. However, these two interface-related phenomena, occurring at GBs, could not be associated with each other using a simple “brick-layer” model. In this work we revise the topic and advocate that the deviation from the model comes from the oxygen vacancies localized at GBs of the rapidly-cooled ST ceramics. To verify this, we annealed the ceramics in oxygen and performed their systematic and comparative analysis using impedance spectroscopy. A levelling-off in the GB conductivity activation energy, which increases for ≤1.24?eV, and a four-fold decrease in the GB permittivity are observed after annealing. Thus, we confirm a key role of oxygen vacancies in relation between the grain growth and GB conductivity anomalies of as-sintered Ti-rich ST ceramics.     

A Maternal High Fat Diet Has Long‐Lasting Effects on Skeletal Muscle Lipid and PLIN Protein Content in Rat Offspring at Young Adulthood

A maternal high fat diet (HFD) can have adverse effects on skeletal muscle development. Skeletal muscle PLIN proteins (PLIN2, 3 and 5) are thought to play critical roles in lipid metabolism, however effects of HFD on PLIN and lipases (HSL, ATGL, CGI‐58) in mothers as well as their offspring have yet to be investigated. The primary objective of this study was to determine whether maternal HFD would influence skeletal muscle lipase and PLIN protein content in offspring at weaning (19d) and young adulthood (3mo). Female rats (28d old, n = 9/group) were fed control (CON, AIN93G, 7 % soybean oil) or HFD (AIN93G, 20 % lard) for 10 weeks prior to mating and throughout pregnancy and lactation. All offspring were weaned to CON [n = 18/group, 1 female and 1 male pup per litter were studied at weaning (19d) and 3mo of age]. There was no effect of sex for the main outcomes measured in plantaris, therefore male and female data was combined. Maternal HFD resulted in higher triacylglycerol content in pups at 3mo (p < 0.05), as well as in the dams (p = 0.015). Maternal HFD resulted in higher PLIN5 content in pups at weaning and 3mo (p = 0.05). PLIN2 and PLIN5 content decreased at 3mo versus weaning (p < 0.001). HFD dams had a higher PLIN3 content (p = 0.016). Diet had no effect on ATGL, CGI‐58, or HSL content. In conclusion, exposure to a maternal HFD resulted in higher skeletal muscle lipid and PLIN5 content in plantaris of offspring through to young adulthood.     

Evaluation of Antioxidant,Antidiabetic and Anticholinesterase Activities of Smallanthus sonchifolius Landraces and Correlation with Their Phytochemical Profiles

The present study aimed to investigate the phytochemical profile of leaf methanol extracts of fourteen Smallanthus sonchifolius (yacon) landraces and their antioxidant, anticholinesterase and antidiabetic activities that could lead to the finding of more effective agents for the treatment and management of Alzheimer’s disease and diabetes. For this purpose, antioxidant activity was assessed using different tests: ferric reducing ability power (FRAP), 2,2-diphenyl-1-picryl hydrazyl (DPPH), nitric oxide (˙NO) and superoxide (O₂˙⁻) scavenging and lipid peroxidation inhibition assays. Anticholinesterase activity was investigated by quantifying the acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) inhibitory activities, whereas antidiabetic activity was investigated by α-amylase and α-glucosidase inhibition tests. To understand the contribution of metabolites, phytochemical screening was also performed by high performance liquid chromatography-diode array detector (HPLC-DAD) system. Among all, methanol extract of PER09, PER04 and ECU44 landraces exhibited the highest relative antioxidant capacity index (RACI). ECU44 was found to be rich in 4,5-di-O-caffeoylquinic acid (CQA) and 3,5-di-O-CQA and displayed a good α-amylase and α-glucosidase inhibition, showing the lowest IC₅₀ values. Flavonoids, instead, seem to be involved in the AChE and BChE inhibition. The results of this study revealed that the bioactive compound content differences could be determinant for the medicinal properties of this plant especially for antioxidant and antidiabetic activities.     

Solvent‐stable UV‐cured acrylic polysulfone membranes

A systematic investigation of the effect of the presence of acrylate resin on polysulfone‐based membranes was performed with the aim of obtaining chemically stable crosslinked membranes without affecting their flux performances. The membranes were prepared via UV curing of the polymer dope followed by a non‐solvent‐induced phase separation process. Two different acrylic monomers were investigated and their amount was varied in the polymer dope, to study the influence of concentration on final results. High crosslinking degrees were achieved by irradiating the solution for one minute. Morphological investigations of the active surface and of the cross‐sections of the fabricated membranes showed that the typical porosity of ultrafiltration membranes was obtained starting from solutions containing a low amount of crosslinker (10 wt%), which is consistent with the water flux values which were comparable to that of the pristine polysulfone membrane. High concentrations of crosslinker resin in the initial polymer dope produced denser membranes with lower permeability. High rejection of 27 nm particles (>90%) was measured for all samples having measurable flux. The addition of the crosslinker allowed one to obtain stability in various solvents without affecting the flux and rejection performance of the porous membranes. © 2016 Society of Chemical Industry