Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.     

Interactions of polymers and organic admixtures on portland cement hydration

Interaction of polymers and other organic admixtures on Portland cement hydration is reviewed. This has been compiled in a systematic way. First hydration of Portland cement is described in short. Later, interaction with 4 important components of Portland cement is discussed. Finally interphase effects in polymer modified hydraulic cement are discussed. It is concluded that polymers and organic admixtures interact with the components of Portland cement when they come in contact with water. This interaction is due to ionic binding, causing cross-links which inhibit the film formation property of polymers and influence considerably the crystallisation process during the hardening of concrete. Some low molecular weight organic substances also have a considerable influence on Portland cement during its reaction with water.     

Modulatory Effects of Biosynthesized Gold Nanoparticles Conjugated with Curcumin and Paclitaxel on Tumorigenesis and Metastatic Pathways—In Vitro and In Vivo Studies

Background: Breast cancer is the most common cancer in women globally, and diagnosing it early and finding potential drug candidates against multi-drug resistant metastatic breast cancers provide the possibilities of better treatment and extending life. Methods: The current study aimed to evaluate the synergistic anti-metastatic activity of Curcumin (Cur) and Paclitaxel (Pacli) individually, the combination of Curcumin–Paclitaxel (CP), and also in conjugation with gold nanoparticles (AuNP–Curcumin (Au-C), AuNP–Paclitaxel (Au-P), and AuNP–Curcumin–Paclitaxel (Au-CP)) in various in vitro and in vivo models. Results: The results from combination treatments of CP and Au-CP demonstrated excellent synergistic cytotoxic effects in triple-negative breast cancer cell lines (MDA MB 231 and 4T1) in in vitro and in vivo mouse models. Detailed mechanistic studies were performed that reveal that the anti-cancer effects were associated with the downregulation of the expression of VEGF, CYCLIN-D1, and STAT-3 genes and upregulation of the apoptotic Caspase-9 gene. The group of mice that received CP combination therapy (with and without gold nanoparticles) showed a significant reduction in the size of tumor when compared to the Pacli alone treatment and control groups. Conclusions: Together, the results suggest that the delivery of gold conjugated Au-CP formulations may help in modulating the outcomes of chemotherapy. The present study is well supported with observations from cell-based assays, molecular and histopathological analyses.     

First and second law analyses of a typical solar air dryer system: a case study

This communication presents an experimental study based on energy and exergy analyses of a typical solar air dryer. On the basis of the experimental results, the first and the second law efficiencies are calculated with respect to the available solar radiation. It is found that the second law efficiency is much less than the first law efficiency irrespective of the mass flow rate of the circulating fluid. It is also found that both efficiencies are an increasing function with respect to the mass flow rate of the working fluid. For a particular day, it is also found that first and second law efficiencies fluctuate according to radiation. The results obtained in this article are found to be consistent with those obtained by earlier authors as given in the literature.     

Thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine on the basis of a new isentropic exponent

The thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine is presented in this paper, on the basis of a new (harmonic mean) isentropic exponent. An analytical expression is derived for the optimum pressure ratio and maximum non-dimensional net work output. It is found that the optimum pressure ratio and the maximum non-dimensional net work are high when the ratio of extreme temperatures of cycle (i.e. T _max and T _min) and isentropic efficiencies of compressor and turbine (i.e. η_c and η_t) are high. The theoretical results are also compared with the practical conditions of power plant.     

Experimental and thermal analysis of energy efficient novel design wet cooling towers

Waste heat is generally dissipated from process water to atmospheric air in cooling towers. In the present study, a novel design is used to extract more amount of heat without any additional energy input by incorporating secondary ambient air in an induced draft wet cooling tower. In addition, more fresh air is induced in the tower from the rain zone, which increases the effectiveness at any value of the water to air flow rate (L/G ratio). Moreover, tower characteristics, range, and evaporation loss were also increased due to the novel design. It is noteworthy that secondary fresh air increases effectiveness, heat rejection, and tower characteristics by 10.12%, 19.65%, and 26.11%, respectively, and decreases approach by 16.32% at 0.55 L/G ratio, 44°C inlet water temperature, 29.7°C dry bulb temperature, and 18.4°C inlet air wet bulb temperature.     

Evaluation of hydrogen metabolism by Escherichia coli strains possessing only a single hydrogenase in the genome

The four hydrogenase isozymes; hydrogenase 1 (Hyd-1), hydrogenase 2 (Hyd-2), hydrogenase 3 (Hyd-3) and hydrogenase 4 (Hyd-4) of Escherichia coli have been reported for their crucial functions in the hydrogen metabolism; however, their distinctive roles could not be completely understood. In this study, four ideal hydrogenase operon mutants, Δhyb hyc hyf, Δhya hyc hyf, Δhya hyb hyf, and Δhya hyb hyc, in which only a single hydrogenase is intact in the genome, were constructed as well as one quadruple mutant (Δhya hyb hyc hyf) that all four hydrogenase operons were deleted. First, single operon mutants and single-gene mutants for each hydrogenase showed different hydrogen productivity and growth in the anaerobic fermentation, indicating that bacterial phenotype regarding the hydrogen metabolism via the deletion of each operon is different with that of each single gene. Then, 4 triple hydrogenase operon mutants and one quadruple mutant were investigated to evaluate the hydrogen metabolism (hydrogen production and uptake) using glucose or glycerol as a substrate of hydrogen fermentation. With both the carbon sources, only Hyd-2 and Hyd-3 were able to produce hydrogen. Furthermore, all the hydrogenases showed hydrogen uptake activity. In addition, no hydrogen production and hydrogen uptake were detected in the quadruple mutant which does not have all 4 hydrogenases. Hydrogen production from Hyd-2 and Hyd-3 was further confirmed by complementing their operons in the cloning vector pBR322.     

Passive solar heating of a non-airconditioned building with movable insulation over the roof pond

This paper presents a simple mathematical model for solar space heating in a non-airconditioned building with movable insulation over the roof pond. The building room considered is of rectangular shape (6 m × 5 m × 4 m) based on the ground. The effects of heat conduction to the ground, heat transfers to furnishings and heat losses due to air ventilation/infiltration have been taken into account in the general heat transfer analysis. The day-to-night change of insulation over the roof pond has been represented by a rectangular step function variation of the heat transfer coefficient at the pond's surface. An increase of 3 to 4°C in the room air temperature is achieved by means of movable insulation over the roof pond on a mild winter's day (17th February, 1982) in New Delhi.     

An efficient video watermarking based security model

Microsystem Technologies - Watermarking is defined as about hiding any valuable information set in the particular digital media by itself through modifying the particular graphic contents. In our...