Enhancing the carbon sink in European agricultural soils: including trace gas fluxes in estimates of carbon mitigation potential

The possibility that the carbon sink in agricultural soils can be enhanced has taken on great political significance since the Kyoto Protocol was finalised in December 1997. The Kyoto Protocol allows carbon emissions to be offset by demonstrable removal of carbon from the atmosphere. Thus, forestry activities (Article 3.3) and changes in the use of agricultural soils (Article 3.4) that are shown to reduce atmospheric CO₂levels may be included in the Kyoto emission reduction targets. The European Union is committed to a reduction in CO₂ emissions to 92% of baseline (1990) levels during the first commitment period (2008–2012). We have shown recently that there are a number of agricultural land-management changes that show some potential to increase the carbon sink in agricultural soils and others that allow alternative forms of carbon mitigation (i.e. through fossil fuel substitution), but the options differ greatly in their potential for carbon mitigation. The changes examined were, (a) switching all animal manure use to arable land, (b) applying all sewage sludge to arable land, (c) incorporating all surplus cereal straw, (d) conversion to no-till agriculture, (e) use of surplus arable land to de-intensify 1/3 of current intensive crop production (through use of 1/3 grass/arable rotations), (f) use of surplus arable land to allow natural woodland regeneration, and (g) use of surplus arable land for bioenergy crop production. In this paper, we attempt for the first time to assess other (non-CO₂) effects of these land-management changes on (a) the emission of the other important agricultural greenhouse gases, methane and nitrous oxide, and (b) other aspects of the ecology of the agroecosystems. We find that the relative importance of trace gas fluxes varies enormously among the scenarios. In some such as the sewage sludge, woodland regeneration and bioenergy production scenarios, the inclusion of trace gases makes only a small (<10%) difference to the CO₂-C mitigation potential. In other cases, for example the no-till, animal manure and agricultural de-intensification scenarios, trace gases have a large impact, sometimes halving or more than doubling the CO₂-C mitigation potential. The scenarios showing the greatest increase when including trace gases are those in which manure management changes significantly. In the one scenario (no-till) where the carbon mitigation potential was reduced greatly, a small increase in methane oxidation was outweighed by a sharp increase in N₂O emissions. When these land-management options are combined to examine the whole agricultural land area of Europe, most of the changes in mitigation potential are small, but depending upon assumptions for the animal manure scenario, the total mitigation potential either increases by about 20% or decreases by about 10%, shifting the mitigation potential of the scenario from just above the EU's 8% Kyoto emission reduction target (98.9 Tg C y⁻¹) to just below it. Our results suggest that (a) trace gas fluxes may change the mitigation potential of a land management option significantly and should always be considered alongside CO₂-C mitigation potentials and (b) agricultural management options show considerable potential for carbon mitigation even after accounting for trace gas fluxes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Experimental analysis of a mass storage system

Mass storage systems (MSSs) play a key role in data‐intensive parallel computing. Most contemporary MSSs are implemented as redundant arrays of independent/inexpensive disks (RAID) in which commodity disks are tied together with proprietary controller hardware. The performance of such systems can be difficult to predict because most internal details of the controller behavior are not public. We present a systematic method for empirically evaluating MSS performance by obtaining measurements on a series of RAID configurations of increasing size and complexity. We apply this methodology to a large MSS at Ohio Supercomputer Center that has 16 input/output processors, each connected to four 8 + 1 RAID5 units and provides 128 TB of storage (of which 116.8 TB are usable when formatted). Our methodology permits storage‐system designers to evaluate empirically the performance of their systems with considerable confidence. Although we have carried out our experiments in the context of a specific system, our methodology is applicable to all large MSSs. The measurements obtained using our methods permit application programmers to be aware of the limits to the performance of their codes. Copyright © 2006 John Wiley & Sons, Ltd.     

纵观3G基站开发的变化

基站接口规范在如何进行3G基站开发方面，2004年被证明是具有显著变化的一年。通用公共无线接口组织(CPRI)和开放式基站结构同盟(OBSAI)分别提出了两个标准，用来规范基站内开放的、标准化的接口。两个组织已经公布了它们的技术规范，支持新标准的产品也开始出现。图1为OBSAI标准定义的开放接口实例。     

Modeling of crack bridging in a unidirectional metal matrix composite

The effective fatigue crack driving force and crack opening profiles were determined analytically for fatigue tested unidirectional composite specimens exhibiting fiber bridging. The crack closure pressure due to bridging was modeled using two approaches; the fiber pressure model and the shear lag model. For both closure models, the Bueckner weight function method and the finite element method were used to calculate crack opening displacements and the crack driving force. The predicted near crack tip opening profile agreed well with the experimentally measured profiles for single edge notch SCS-6/Ti-15-3 metal matrix composite specimens. The numerically determined effective crack driving force, K _eff, was calculated using both models to correlate the measured crack growth rate in the composite. The calculated K _eff from both models accounted for the crack bridging by showing a good agreement between the measured fatigue crack growth rates of the bridged composite and that of unreinforced, unbridged titanium matrix alloy specimens.     

Interface design on cabin pressurization system affecting pilot's situation awareness: The comparison between digital displays and pointed displays

The fundamental approach to improve pilots’ situation awareness (SA) would be to reorganize and restructure the presentation of information to fit pilot's cognitive model on the flight deck. This would facilitate pilots’ perception, understanding, and projection, hence making it easier to find the relevant targets. Sixty pilots (30 B‐737 pilots and 30 B‐777 pilots) participated in this study to investigate pilots’ SA while interacting with digital displays and moving pointed needle displays on cabin pressurization system. The results have shown significant differences on pilots’ perception, understanding, and overall SA between digital display and pointed display on the flight deck. Pilots significantly preferred the digital design cabin pressurization system, which is consistent with the proximity compatibility principle, and the position of the display on the center instrument panel is easily accessible to both pilots and does not require large head movements. There are some recommendations on the cabin pressurization design including the size of outflow valve position indicator, which should be significantly increased to provided saliency of information; color coding should be used on cabin altitude and differential pressure indicator to mark critical cabin altitude; and standard operating procedures shall include cabin altitude and differential pressure reading by pilot monitoring. The final and completed solution to the issues on the cabin pressurization system is to redesign the scattered pointed displays as integrated digital displays to fit the human‐centered principle.     

Modelling the perennial energy crop market: the role of spatial diffusion

Biomass produced from energy crops, such as Miscanthus and short rotation coppice is expected to contribute to renewable energy targets, but the slower than anticipated development of the UK market implies the need for greater understanding of the factors that govern adoption. Here, we apply an agent-based model of the UK perennial energy crop market, including the contingent interaction of supply and demand, to understand the spatial and temporal dynamics of energy crop adoption. Results indicate that perennial energy crop supply will be between six and nine times lower than previously published, because of time lags in adoption arising from a spatial diffusion process. The model simulates time lags of at least 20 years, which is supported empirically by the analogue of oilseed rape adoption in the UK from the 1970s. This implies the need to account for time lags arising from spatial diffusion in evaluating land-use change, climate change (mitigation or adaptation) or the adoption of novel technologies.     

Challenges and opportunities for linking the modeling of forest vegetation dynamics with landscape planning models

Landscape planning and analysis, landscape simulations, and landscape projections all seek to either evaluate the current or past condition of a landscape or project future conditions. The level of spatial and computational resolution chosen should be carefully considered because it will restrict or empower future developments in large-scale, integrated landscape planning projects. In this paper, the basic challenges and opportunities associated with using forest vegetation growth and yield models and databases in large-scale, long-term forest landscape simulation projects are outlined. We pose several questions that integrated landscape modeling teams should consider when evaluating whether to use forest growth and yield data in landscape planning efforts. When managers and other professionals involved in landscape planning efforts are prepared for the challenges and opportunities inherent in modeling forest vegetation dynamics, they may then be positioned to implement a fast and smooth modeling process.     

22nm技术节点的成品率目标

半导体行业正在开发必要的缺陷量测和薄膜量测解决方案,但22nm技术节点的监测还需开发新的成像套刻目标结构。     

Attenuation of green fluorescent protein half-life in mammalian cells

The half-life of the green fluorescent protein (GFP) was determinedbiochemically in cultured mouse LA-9 cells. The wild-type proteinwas found to be stable with a half-life of ~26 h, but couldbe destabilized by the addition of putative proteolytic signalsequences derived from proteins with shorter half-lives. A C-terminalfusion of a PEST sequence from the mouse ornithine decarboxylasegene reduced the half-life to 9.8 h, resulting in a GFP variantsuitable for the study of dynamic cellular processes. In anN-terminal fusion containing the mouse cyclin B1 destructionbox, it was reduced to 5.8 h, with most degradation taking placeat metaphase. The combination of both sequences produced a similarGFP half-life of 5.5 h. Thus, the stability of this marker proteincan be controlled in predetermined ways by addition of the appropriateproteolytic signals.