Density-controllable growth of SnO2 nanowire junction-bridging across electrode for low-temperature NO2 gas detection

The junction-bridging structure of metal oxide nanowires (NWs) improves gas-sensing properties. In this study, an on-chip growth method was used to fabricate gas sensors, it easily and effectively controls NW junctions. SnO₂ NWs were synthesized by thermal evaporation at 800 °C with tin powder as the source. The density of the NW junctions was controlled by changing the mass of the source material. A source material with large mass yielded high-density NW junctions. With electrode spacing of 20 μm, NW junctions were formed from the source material of larger than 2 mg. Gas sensing results revealed that the junction sensors exhibited a good response to NO₂ gas at a concentration of 1–10 ppm. The sensors exhibited a good response to NO₂ gas at low temperature of up to 100 °C and short response–recovery time (~20 s). The sensors also had good selectivity to NO₂ gas. The response (R _gas /R _air) to 1 ppm NO₂ was as high as 22 at 100 °C, whereas the cross gas responses (R _air /R _gas) to 10 ppm CO, 10 ppm H₂S, 100 ppm C₂H₅OH, and 100 ppm NH₃ were negligible (1.1–1.3).     

Comparison of modified injection molding and conventional machining in biodegradable behavior of perforated cannulated magnesium hip stents

In this study,perforated cannulated magnesium(Mg)hip stents were fabricated via modified Mg injection molding and conventional machining,respectively.Additionally,the stent canal was filled with paraffin to simulate injection of biomaterials.The microstructure,mechanical performance,corrosion behavior,and biocompatibility were comparably studied.Scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS)showed higher affinity of interstitial element such as oxygen and carbon as consequences of routine molding process.After immersion in SBF,machining stents showed reduced degradation rate and increased deposition of calcium phosphate compared to molding stents.Corrosion resistance was improved via paraffin-filling.Consistently,the hemolysis and in vitro osteoblast cell culture models showed favourable biocompatibility in machining stents compared to molding ones,which was improved by paraffin-filling treatment as well.These results implied that the feasibility of the prepared machining stents as the potential in vivo orthopaedic application where slower degradation is required,which could be enhanced by designing canal-filling injection of biomaterials as well.     

Micromechanical digital-to-analog converter for out-of-plane motion

This paper describes a novel micromechanical digital-to-analog converter (MDAC) for out-of-plane motion using electrostatic parallel-plate actuators. The proposed mechanism converts an N-bit digital signal to a mechanical out-of-plane displacement that is proportional to the analog value represented by the N-bit binary word. The mechanism is analogous to that of an electrical binary-weighted-input digital-to-analog converter (DAC). It consists of a movable platform, an array of parallel-plate microactuators each operating in an ON/OFF mode and a set of connection springs that connect the actuators to the platform. The spring constants of the connection springs are weighted so that the stiffness of successive springs is related by a factor of 2. A 4-bit mechanism has been fabricated using the Poly-MUMPS process, achieving a total stroke of 675 nm (full-scale output) and step size (LSB) of 45 nm in a highly repeatable and stable manner. The linearity error (LE) of the device is within /spl plusmn/0.28 LSB, and the differential linearity error (DLE) is within /spl plusmn/0.25 LSB. This mechanism can be configured for many promising applications, particularly in optical devices and systems such as tunable external cavity diode laser, tunable VCSELs, adaptive micromirror array and tunable wavelength filter.     

Modified Fluoroquinolones as Antimicrobial Compounds Targeting Chlamydia trachomatis

Chlamydia trachomatis causes the most common sexually transmitted bacterial infection and trachoma, an eye infection. Untreated infections can lead to sequelae, such as infertility and ectopic pregnancy in women and blindness. We previously enhanced the antichlamydial activity of the fluoroquinolone ciprofloxacin by grafting a metal chelating moiety onto it. In the present study, we pursued this pharmacomodulation and obtained nanomolar active molecules (EC₅₀) against this pathogen. This gain in activity prompted us to evaluate the antibacterial activity of this family of molecules against other pathogenic bacteria, such as Neisseria gonorrhoeae and bacteria from the ESKAPE group. The results show that the novel molecules have selectively improved activity against C. trachomatis and demonstrate how the antichlamydial effect of fluoroquinolones can be enhanced.     

Switching rate and receiver performance of binary modulations with the selection‐and‐stay combining over independent and correlated Nakagami‐m fading channels

The dual‐branch selection‐and‐stay combining (SSTC) is analyzed for diversity reception on independent and correlated Nakagami‐m fading channels, where the conventional selection combining (SC) is employed only at the switching instance, and the receiver uses the selected branch till its signal‐to‐noise ratio (SNR) estimation is lower than a preset threshold. In this combining scheme, the receiver only needs to continuously estimate the SNR of the single selected branch. For the performance analysis of SSTC, the switching rate and the average bit error rates (BERs) of different binary coherent and non‐coherent modulations are evaluated. Numerical results based on the analysis and simulations are illustrated. According to the analysis and numerical results, the SSTC outperforms the existing switch‐and‐stay combining in the senses of the average BER and switching rate. Copyright © 2011 John Wiley & Sons, Ltd.     

Detection of cross-channel anomalies

The data deluge has created a great challenge for data mining applications wherein the rare topics of interest are often buried in the flood of major headlines. We identify and formulate a novel problem: cross-channel anomaly detection from multiple data channels. Cross-channel anomalies are common among the individual channel anomalies and are often portent of significant events. Central to this new problem is a development of theoretical foundation and methodology. Using the spectral approach, we propose a two-stage detection method: anomaly detection at a single-channel level, followed by the detection of cross-channel anomalies from the amalgamation of single-channel anomalies. We also derive the extension of the proposed detection method to an online settings, which automatically adapts to changes in the data over time at low computational complexity using incremental algorithms. Our mathematical analysis shows that our method is likely to reduce the false alarm rate by establishing theoretical results on the reduction of an impurity index. We demonstrate our method in two applications: document understanding with multiple text corpora and detection of repeated anomalies in large-scale video surveillance. The experimental results consistently demonstrate the superior performance of our method compared with related state-of-art methods, including the one-class SVM and principal component pursuit. In addition, our framework can be deployed in a decentralized manner, lending itself for large-scale data stream analysis.     

Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing

Bulk ultrafine-grained nickel specimens having grain sizes in the range of 0.25-5 μm were consolidated by hot isostatic pressing technique. The resulting microstructures were characterized by transmission electron microscopy and X-ray diffraction analysis. Compression tests were carried out at room temperature and at strain rate of 1.6×10⁻⁴ s⁻¹. It was found that the measured yield strength does not follow the Hall-Petch law as a consequence of the presence of oxide phase. Therefore, the use of micromechanics based model, which takes into account only the Hall-Petch relationship at grain level for predicting the grain sized effects on mechanical behavior of this kind of materials, is not accurate yet. In this study, a modification made to the generalized self-consistent model was proposed for studying both grain size and oxide phase dependence of ultrafine-grained materials behavior. Because of the novel modification, an optimization procedure with two steps was required to identify the parameters of micromechanical model. An acceptable agreement between experimental and numerical results was achieved. Moreover, the influence of texture on the yield strength and the application of the proposed model to the spark plasma sintering processed materials were also discussed.     

Neurofuzzy control of a low‐temperature desulphurization plant

Low‐temperature desulphurization (LTD) is a low‐cost alternative to conventional wet scrubbing for removing sulphur dioxide from flue gas produced by power generating plants. A problem in the design of conventional controllers to achieve and maintain process conditions for optimal desulphurisation is the lack of mathematical models to characterise the complex desulphurization process and unexpected environ mental disturbances. The aim of the work reported in this paper was to replace a skilled human operator who could successfully regulate the LTD plant through manipulation of low‐level controllers with a competitive neurofuzzy system, which possesses both the learning ability of neural networks and the structural transparency of fuzzy logic systems. A hierarchical control structure was adopted whereby the competitive neurofuzzy method was used at the top level for co‐ordinating actions of low‐level conventional controllers. This approach would considerably simplify the task of designing the control system and has been shown to yield high‐level controllers with performances at least equalling that of expert operators, as demonstrated in this paper. Copyright © 2001 John Wiley & Sons, Ltd.