Religious Participation, Interleukin-6, and Mortality in Older Adults.

This study prospectively examined the relationship between religious attendance, interleukin-6 (IL-6) levels, and mortality rates in a community-based sample of 557 older adults. Attending religious services more than once weekly was a significant predictor of lower subsequent 12-year mortality and elevated IL-6 levels (> 3.19 pg/mL), with a mortality ratio of .32 (95% confidence interval [CI] = 0.15,0.72; p     

Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.     

Birefringence in benzocyclobutene strip optical waveguides

We report the fabrication of benzocyclobutene strip optical waveguides and the measurement of their birefringence properties. To take into account the stress-induced birefringence in the waveguide, we generalize the formulas reported previously for the analysis of strip waveguides. Our experimental results are shown to agree closely with the theoretical calculation. The condition for achieving zero modal birefringence by control of the aspect ratio of the strip of the waveguide is highlighted. The dependence of the birefringence in the waveguides on the temperature is also measured and discussed.     

Reliability evaluation and optimisation of imperfect inspections for a component with multi-defects

In this paper, a model is developed to evaluate the reliability and optimise the inspection schedule for a multi-defect component. The model uses a non-homogeneous Poisson process (NHPP) method in conjunction with a delay time approach. The inspections are designed to detect any defects in the component, however it can be imperfect. The defect is a definable state before a functional failure happens to the component. Occurrences of defects are assumed to follow an NHPP and a defect will be minimally repaired if it is identified during an inspection. It is shown that the failures occurring in an interval of inspection will also follow an NHPP. The situation of imperfect inspections and non-constant inspection intervals are considered. An algorithm is presented to optimise the intervals of inspections in order to maximise the reliability of the component, and the properties of the algorithm are shown. A numerical example with parametric study is given to show the performance of the model and the algorithm.     

Managing Clinical Use of High-Alert Drugs: A Supervised Learning Approach to Pharmacokinetic Data Analysis

Drug-related problems, particularly those that result from sub- or overtherapeutic doses of high-alert medications, have become a growing concern in clinical medicine. In this paper, we use a model-tree-based regression technique (namely, M5) and support vector machine (SVM) for regression to develop learning-based systems for predicting the adequacy of a vancomycin regimen. We empirically evaluate each system's accuracy in predicting patients' peak and trough concentrations in different clinical scenarios characterized by renal functions and regimen types. Our data consist of 1099 clinical cases that were collected from a major tertiary medical center in southern Taiwan. We also examine the use of bagging for enhancing the prediction power of the respective systems and include in our evaluation a salient one-compartment model for performance benchmark purposes. Overall, our evaluation results suggest that both M5 and SVM are significantly more accurate than the benchmark one-compartment model in predicting patients' peak and trough concentrations across all investigated clinical scenarios. M5 appears to benefit considerably from bagging, which has a positive but seemingly smaller effect on SVM. Taken together, our findings indicate supervised learning techniques that are capable of effectively supporting clinicians' use of vancomycin or similar high-alert drugs in their patient care and management.     

Effect of spray nozzle design on liquid-solid contact in fluidized beds

In industrial fluid cokers the feedstock, consisting of heavy bituminous hydrocarbons, is atomized with steam and injected into a hot fluidized bed of coke. Good and uniform contact of the liquid droplets with the solid particles is required to provide heat for the cracking reactions while minimizing mass transfer effects. Experiments in a pilot plant coker have suggested that the initial particle/liquid mixing, in the spray jet, is rather poor. Experiments in a X-ray scanner showed that liquid droplets and entrained particles accumulate just below the tip of the jet plume to form agglomerates.An experimental technique was used to quantitatively determine the quality of mixing with a variety of nozzle configurations including several novel designs. By improving spray stability, redistributing liquid droplets to the solids-rich region of the jet and increasing the surface area of the gas-liquid jet-fluidized bed interface, liquid/solid contact is improved.     

Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)

Poly(arylene ether benzonitrile) (PAEBN) was synthesized with 2,6‐dichlorobenzonitrile and biphenol. PAEBNs with various molecular weights (MWs), 1,640,000 and 185,000 g/mol, were synthesized by control of the stoichiometry of the monomers and were blended with sulfonated poly(ether ether ketone) (SPEEK). The effects of MW on the water uptake, swelling, methanol permeability, and proton conductivity of the SPEEK/PAEBN blend membranes were investigated. The molecular mobility of the SPEEK/PAEBN blends was also examined in this study. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of current stressing on the reliability of 63Sn37Pb solder joints

The effect of current stressing on the reliability of 63Sn37Pb solder joints with Cu pads was investigated at temperatures of −5 °C and 125 °C up to 600 h. The samples were stressed with 3 A current (6.0 × 10² A/cm² in the solder joint with diameter of 800 μm and 1.7 × 10⁴ A/cm² in the Cu trace with cross section area of 35 × 500 μm). The temperatures of the samples and interfacial reaction within the solder joints were examined. The microstructural change of the solder joints aged at 125 °C without current flow was also evaluated for comparison. It was confirmed that the current flow could cause the temperature of solder joints to rise rapidly and remarkably due to accumulation of massive Joule heat generated by the Cu trace. The solder joints stressed at 125 °C with 3 A current had an extensive growth of Cu₆Sn₅ and Cu₃Sn intermetallic compounds (IMC) at both top and bottom solder-to-pad interfaces. It was a direct result of accelerated aging rather than an electromigration or thermomigration effect in this experiment. The kinetic is believed to be bulk diffusion controlled solid-state reaction, irrespective of the electron flow direction. When stressed at −5 °C with 3 A current, no significant change in microstructure and composition of the solder joints had occurred due to a very low diffusivity of the atoms as most Joule heat was eliminated at low temperature. The IMC evolution of the solder joints aged at 125 °C exhibited a subparabolic growth behavior, which is presumed to be a combined mechanism of grain boundary diffusion and bulk diffusion. This is mainly ascribed to the retardant effect against the diffusion course by the sufficiently thick IMC layer that was initially formed during the reflow soldering.