Effect of fluorinated silicate glass passivation layer on electrical characteristics and dielectric reliabilities for the HfO2/SiON gate stacked nMOSFET

The superior characteristics of the fluorinated hafnium oxide/oxynitride (HfO₂/SiON) gate dielectric are investigated comprehensively. Fluorine is incorporated into the gate dielectric through fluorinated silicate glass (FSG) passivation layer to form fluorinated HfO₂/SiON dielectric. Fluorine incorporation has been proven to eliminate both bulk and interface trap densities due to Hf-F and Si-F bonds formation, which can strongly reduce trap generation as well as trap-assisted tunneling during subsequently constant voltage stress, and results in improved electrical characteristics and dielectric reliabilities. The results clearly indicate that the fluorinated HfO₂/SiON gate dielectric using FSG passivation layer becomes a feasible technology for future ultrathin gate dielectrics applications.     

Investigation of electroless cobalt-phosphorous layer and its diffusion barrier properties of Pb-Sn solder

The capability of a cobalt-phosphorous [Co(P)] layer, which was grown via the electroless plating process, to serve as the diffusion barrier of lead-tin (PbSn) solder was investigated in this work. The Auger electron spectroscopy (AES) and energy dispersive spectrometry (EDX) indicated that the phosphorous contents in Co(P) films decrease with increasing film thickness and that the average contents are no less than 8.7 at.% for the specimens prepared in this work. X-ray diffraction in conjunction with composition analyses revealed that the electroless Co(P) layer was a mixture of amorphous and nanocrystalline structures; however, the AES depth profile and subsequent analyses indicated that the first-formed Co(P) layer should be amorphous because it contains as much as 18 at.% P. This implied a good barrier capability for electroless Co(P) because, as revealed by EDX line scan, the Sn and Cu atoms could not penetrate the Co(P) layer after the PbSn/Cu/Co(P)/Cu/Ti/Si sample was subjected to annealing at 250°C in a forming gas ambient for 24 h. The fact that Sn and Cu underlayers could not penetrate the Co layer after such a liquid-state annealing step was evidence that the Co(P) layer may simultaneously serve as a diffusion-barrier interlayer dielectric and as an under-bump metallization for flip-chip copper (Cu) ICs.     

An Ultra-Wideband Distributed Active Mixer MMIC in 0.18-μm CMOS Technology

In this paper, a distributed circuit topology for active mixers suitable for ultra-wideband operations is presented. By employing nonuniform artificial transmission lines with the complementary transconductance stages in the Gilbert-cell multiplier, the proposed mixer demonstrates broadband characteristics at microwave frequencies while maintaining a high conversion gain (CG) with improved gain flatness. Using a 0.18-mum CMOS process, the proposed circuit is implemented, exhibiting a -3-dB bandwidth of 28 GHz. With a local-oscillator power of 3 dBm and an IF frequency of 10 MHz, the fabricated circuit has a CG of 12.5plusmn1 dB and an average input third-order intercept point (IIP₃) of 0 dBm within the entire frequency range. The fully integrated wideband mixer occupies a chip area of 0.87times0.82 mm² and consumes a dc power of 20 mW from a 2-V supply voltage     

Direct Encapsulation of Organic Light-Emitting Devices (OLEDs) Using Photo-Curable co-Polyacrylate/Silica Nanocomposite Resin

Direct encapsulation of organic light-emitting devices (OLEDs) was realized by using highly transparent, photo-curable co-polyacrylate/silica nanocomposite resin. Feasibility of such a resin for OLED encapsulation was evaluated by physical/electrical property analysis of resins and driving voltage/luminance/lifetime measurement of OLEDs. Electrical property analysis revealed a higher electrical insulation of photocured nanocomposite resin film at 3.20times10¹² Omega in comparison with that of oligomer film at 1.18times10¹² Omega at 6.15 V to drive the bare OLED. This resulted a lower leakage current and the device driving voltage was efficiently reduced so that the nanocomposite-encapsulated OLED could be driven at a lower driving voltage of 6.09 V rather than 6.77 V for the oligomer-encapsulated OLED at the current density of 20 mA/cm². Luminance measurement revealed a less than 1.0% luminance difference of OLEDs encapsulated by various types of resins, which indicates that the photo-polymerization takes very little effect on the light-emitting property of OLEDs. Lifetime measurement of OLEDs found that , the time span for the normalized luminance of device drops to 80%, for nanocomposite-encapsulated OLED is 350.17 h in contrast to 16.83 h for bare OLED and 178.17 h for the oligomer-encapsulated OLED. This demonstrates that nanocomposite resin with optimum properties is feasible to OLED packaging and a compact device structure could be achieved via the method of direct encapsulation.     

A fast tag identification anti‐collision algorithm for RFID systems

In this work, we propose a highly efficient binary tree‐based anti‐collision algorithm for radio frequency identification (RFID) tag identification. The proposed binary splitting modified dynamic tree (BS‐MDT) algorithm employs a binary splitting tree to achieve accurate tag estimation and a modified dynamic tree algorithm for rapid tag identification. We mathematically evaluate the performance of the BS‐MDT algorithm in terms of the system efficiency and the time system efficiency based on the ISO/IEC 18000‐6 Type B standard. The derived mathematical model is validated using computer simulations. Numerical results show that the proposed BS‐MDT algorithm can provide the system efficiency of 46% and time system efficiency of 74%, outperforming all other well‐performed algorithms.     

Distributed key management scheme for peer‐to‐peer live streaming services

Live media streaming over peer‐to‐peer (P2P) network structures is commonplace nowadays. However, with the large number of users in a typical P2P system, it is impractical to use the central server to process the key information update requests of all the users Accordingly, the present study proposes a distributed key management scheme in which the server is only required to transmit the key update information to a limited number of users. To further reduce the load on the server, the update information is distributed using a hop‐by‐hop approach. An effective method is proposed for protecting the key update information as it is propagated through the network. In addition, a technique is presented for ensuring the security of the certificates used in the system It is shown that the distributed key management scheme and authentication procedure ensure an efficient and secure P2P live streaming performance even in the event of high churn rates. Copyright © 2012 John Wiley & Sons, Ltd.     

Smartphone Traffic Engineering for Energy Efficient Communications: Design and Experimental Evaluation

Power management has increased its significance in mobile communications along with the growing population of mobile users and wireless connectivity. In this paper we propose a smart scheduling algorithm in Android network kernel to increase power efficiency. As periodically-updating applications start sync with a DNS query packet, we defer the packets in order to make these applications synchronize from smaller time difference to finally simultaneously. To implement the idea, we design the algorithm for two or more applications in this paper. This algorithm is composed of several mechanisms: approaching, aligning, and maintaining. By experiments we show the practicability and the comparison between the energy saving ratios in different scenarios.     

Tomographic reconstruction for tilted helical multislice CT

One of the most recent technical advancements in computed tomography (CT) is the introduction of multislice CT (MCT). Because multiple detector rows are used for data acquisition, MCT offers higher volume coverage, faster scan speed, and reduced X-ray tube loading. Recognizing its unique data-sampling pattern, several image reconstruction algorithms were developed. These algorithms have been shown to be adequate in producing clinically acceptable images. Recent studies, however, have revealed that the image quality of MCT can be significantly degraded when helical data are acquired with a tilted gantry. The degraded image quality has rendered this feature unacceptable for clinical usage. In this paper, we first present a detailed investigation on the cause of the image quality degradation. An analytical model is derived to provide a mathematical basis for correction. Several compensation schemes are subsequently presented, and a detailed performance comparison is provided in terms of spatial resolution, noise, computation efficiency, and image artifacts.