Finite element analysis of plasticity-induced fatigue crack closure: an overview

Finite element analysis is perhaps the most commonly used numerical method to model plasticity-induced fatigue crack closure. The state-of-the-art is reviewed and a comprehensive overview is presented, summarizing issues which must be considered and emphasizing potential difficulties. These include mesh refinement level, crack advancement schemes, crack shape evolution, geometry effects, and crack opening value assessment techniques.     

Effect of HCl on the doping and shape control of silicon nanowires

The introduction of hydrogen chloride during the in situ doping of silicon nanowires (SiNWs) grown using the vapor-liquid-solid (VLS) mechanism was investigated. Compared with non-chlorinated atmospheres, the use of HCl with dopant gases considerably improves the surface morphology of the SiNWs, leading to extremely smooth surfaces and a greatly reduced tapering. Variations in the wire diameter are massively reduced for boron doping, and cannot be measured at 600?°C for phosphorous over several tens of micrometers. This remarkable feature is accompanied by a frozen gold migration from the catalyst, with no noticeable levels of gold clusters observed using scanning electron microscopy. A detailed study of the apparent resistivity of the NWs reveals that the dopant incorporation is effective for both types of doping. A graph linking the apparent resistivity to the dopant to silane dilution ratio is built for both types of doping and discussed in the frame of the previous results.     

Hybrid Lead Halide Perovskites for Ultrasensitive Photoactive Switching in Terahertz Metamaterial Devices

The recent meteoric rise in the field of photovoltaics with the discovery of highly efficient solar‐cell devices is inspired by solution‐processed organic–inorganic lead halide perovskites that exhibit unprecedented light‐to‐electricity conversion efficiencies. The stunning performance of perovskites is attributed to their strong photoresponsive properties that are thoroughly utilized in designing excellent perovskite solar cells, light‐emitting diodes, infrared lasers, and ultrafast photodetectors. However, optoelectronic application of halide perovskites in realizing highly efficient subwavelength photonic devices has remained a challenge. Here, the remarkable photoconductivity of organic–inorganic lead halide perovskites is exploited to demonstrate a hybrid perovskite–metamaterial device that shows extremely low power photoswitching of the metamaterial resonances in the terahertz part of the electromagnetic spectrum. Furthermore, a signature of a coupled phonon–metamaterial resonance is observed at higher pump powers, where the Fano resonance amplitude is extremely weak. In addition, a low threshold, dynamic control of the highly confined electric field intensity is also observed in the system, which could tremendously benefit the new generation of subwavelength photonic devices as active sensors, low threshold optically controlled lasers, and active nonlinear devices with enhanced functionalities in the infrared, optical, and the terahertz parts of the electromagnetic spectrum.     

Management of gap non-union of tibia by tibialisation of ipsilateral vascular fibula

Community health, psychiatric, and pediatric nurses who work with young children and their families often assess the family's sleep and rest patterns, especially in relation to children's sleep disturbances. Nurses have traditionally taken a rigid approach on this issue that excludes culturally diverse options. The author uses examples from her own nursing education and from cross-cultural research to demonstrate the cultural bias favoring separation of child from parent. The article explores options for broadening nurses' assessment of family sleeping arrangements and designing interventions that take into consideration culturally diverse values and habits. Implications for nursing practice include greater trust-building and mutual learning.     

Preparation and characterization of nanostructured ZnO thin films for photoelectrochemical splitting of water

Nanostructured zinc oxide thin films (ZnO) were prepared on conducting glass support (SnO₂: F overlayer) via sol-gel starting from colloidal solution of zinc acetate 2-hydrate in ethanol and 2-methoxy ethanol. Films were obtained by spin coating at 1500 rpm under room conditions (temperature, 28–35°C) and were subsequently sintered in air at three different temperatures (400, 500 and 600°C). The evolution of oxide coatings under thermal treatment was studied by glancing incidence X-ray diffraction and scanning electron microscopy. Average particle size, resistivity and bandgap energy were also determined. Photoelectrochemical properties of thin films and their suitability for splitting of water were investigated. Study suggests that thin films of ZnO, sintered at 600°C are better for photoconversion than the films sintered at 400 or 500°C. Plausible explanations have been provided.     

Linear and nonlinear filtering for image enhancement

The modified slant and modified slant Haar transforms are proved to be efficient for image bandwidth compression. At times, it may be desirable use the existing hardware and software facilities for different purposes. This paper investigates the utility of the modified slant and modified slant Haar transforms for dynamic range reduction and enhancement of image. Both, the linear and nonlinear filtering techniques are used and the results are interpreted.     

Removal of Fe(II) from tap water by electrocoagulation technique

Electrocoagulation (EC) is a promising electrochemical technique for water treatment. In this work electrocoagulation (with aluminum as electrodes) was studied for iron Fe(II) removal from aqueous medium. Different concentration of Fe(II) solution in tap water was considered for the experiment. During EC process, various amorphous aluminum hydroxides complexes with high sorption capacity were formed. The removal of Fe(II) was consisted of two principal steps; (a) oxidation of Fe(II) to Fe(III) and (b) subsequent removal of Fe(III) by the freshly formed aluminum hydroxides complexes by adsorption/surface complexation followed by precipitation. Experiments were carried out with different current densities ranging from 0.01 to 0.04 A/m². It was observed that the removal of Fe(II) increases with current densities. Inter electrode distance was varied from 0.005 to 0.02 m and was found that least inter electrode distance is suitable in order to achieve higher Fe(II) removal. Other parameters such as conductivity, pH and salt concentration were kept constant as per tap water quality. Satisfactory iron removal of around 99.2% was obtained at the end of 35 min of operation from the initial concentration of 25 mg/L Fe(II). Iron concentration in the solution was determined using Atomic absorption spectrophotometer. By products obtained from the electrocoagulation bath were analyzed by SEM image and corresponding elemental analysis (EDAX). Cost estimation for the electrocoagulation was adopted and explained well. Up to 15 mg/L of initial Fe(II) concentration, the optimum total cost was 6.05 US$/m³. The EC process for removing Fe(II) from tap water is expected to be adaptable for household use.