基体树脂对长玻璃纤维增强PP力学性能的影响

采用在线混合设备制备了长玻璃纤维(LGF)增强聚丙烯(PP)复合材料(LGF-PP),研究了基体性质及界面相容剂对LGF-PP力学性能的影响。基体树脂熔体流动速率的增加,使最终LGF-PP中的玻璃纤维长度从5.63 mm增至8.56 mm,提高了力学性能。与均聚PP比较,以共聚PP为基体树脂的LGF-PP冲击强度高出约10%,但其他性能略差。界面相容剂有利于增强玻璃纤维与PP的界面结合,拉伸强度和拉伸模量明显增加,但是冲击强度降低了20%～30%。     

纳米陶瓷的烧结研究

纳米陶瓷的制备过程中，烧结是关键一环。总结了现有的烧结理论，介绍了国内外流行的纳米烧结技术，并提出了今后的研究方向。     

基于弯道二次流修正模型的大辽河潮流界时空变化模拟

基于ELADI算法的平面二维水环境模型WESC2D,定量研究大辽河潮区界与潮流界的时空变化规律。在模拟和验证大辽河潮位变化过程基础上,通过数值试验系统地模拟分析了上游径流量及汇流比、下游潮差和海平面上升对大辽河潮区界与潮流界的影响规律,并以1999年—2009年水文过程为条件定量研究大辽河潮流界的年、月变化及潮流界位置出现频率。结果表明,径流是影响大辽河潮区界与潮流界位置的主要因素,大辽河潮流界远远超过三岔河。     

尿素改性热塑性酚醛树脂的合成及应用

先用尿素、甲醛合成二羟甲脲，然后在酸性介质下把二羟甲脲滴加在苯酚中反应合成尿素改性的热塑性酚醛树脂。研究了反应浑浊点和二羟甲脲的滴加速度，同时研究了二羟甲脲与苯酚的尿酚比与物料的出料温度、产品产率及树脂理化性能指标的关系。结果表明：（1）二羟甲脲滴加速度的合适范围是0．012－0．029mol/mol.min；（2）本树脂的出料温度为125℃以下；（3）产品收率，游离酚，软化点随尿比的增长而递增，凝胶速度变化不大。另介绍了这种树脂在酚醛模塑料中的应用。     

Ways of strengthening biodegradable soy‐dreg plastics

Biodegradable plastics (GSD) based on soy dreg (SD) were prepared by compression‐molding, with glycerol as the plasticizer and glutaraldehyde (GA) as the cross‐linker. The structure and properties of the GSD sheets were investigated by Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), scanning electron microscope (SEM), and tensile test methods. The results indicate that when GA content was 6.8%, the tensile strength (σ_b) of the sheet reached the maximum value of 14.5 MPa. Moreover, the strength and water resistance of the sheets coated with castor‐oil‐based polyurethane/nitrochitosan interpenetrating network (IPN) coating were significantly enhanced to 24.6 MPa in the dry state and 9.8 MPa in the wet state. Simultaneously, the test of biodegradability of the GSD sheet in a mineral salts medium containing microorganisms and agar proved that GSD could be fully biodegradable. This work has provided a novel way to utilize low‐cost SD to prepare biodegradable plastics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 422–427, 2003     

Novel Method To Optimize the Structure of Reticulated Porous Ceramics

A novel method has been developed for the fabrication of silicon nitride reticulated porous ceramics (RPCs) with regulated structure, using polyurethane sponge as the template. This technique includes two centrifuging steps. In the first stage, the polyurethane sponges are coated with thin slurry through high-speed centrifuging. After the slurry on sponges dried, a high-strength green body without filled cells is obtained. In the second stage, because of improved adhesion between the body and the slurry after the first coating, the body with uniformly thick strut is produced by recoating the as-prepared green body with thixotropic slurry and centrifuging again. The loading content of slurry and the pore diameter of the RPCs body greatly depend on the slurry viscosity in the process of recoating. The strut diameter and pore diameter of the RPCs are effectively optimized by modulating the slurry viscosity.     

古马隆树脂型聚氨酯防水涂料

介绍一种以古马隆树脂改性的新型双组分聚氨酯防水涂料，并对其原材料的选择、配方、生产工艺等方面进行了研究。     

图引擎底层存储的设计与实现

随着社交网络和语义Web等数据应用的兴起,催生了许多图数据处理产品,包括Neo4j,Hyper Graph DB等,然而这些产品在设计时并未充分考虑图应用对数据可用性和可扩展性的更高要求。为此,提出一种基于分布式内存云的图引擎底层建模和存储解决方案。在内存云上搭建分布式键值引擎,进而在键值存储的基础上对图的数据进行建模和读写。在大规模数据集上的实验结果表明,该方案具有较好的图随机访问性能,并能够高效地支持海量规模的图数据应用。     

相容剂对聚丙烯／滑石粉增容作用研究

作者采用熔融接技方法制备PP-g-AA和PP-g-MAH,并比较了这两种相容剂对PP/滑石粉体系的增容效果。着重研究了引发剂含量、单体含量对PP-g-AA增容作用的影响以及PP-g-AA用量对PP/滑石粉体系力学强度的影响。     

一种基于对等网络的云资源定位算法

提出用分布式哈希表(DHT)为每台云服务器产生一个唯一的节点编号,该编号作为网络拓扑结构、检索信息存储和信息查询共同的标志符,从而形成一个适合分布式计算的结构化P2P覆盖网.设计了新的拓扑和路由协议来解决云资源的常数跳定位问题.仿真实验表明,经典的P2P算法平均查找跳数与网络规模成正相关,无法依据云计算的实际需要人为地控制查找跳数;该算法的平均查找跳数与网络规模无关,随着网络规模的增大而趋向于设定值,可以解决云资源的常数跳定位问题.