Investigation of optical losses in photoelastic and ridge waveguides in GaAs-AlGaAs heterostructures

Two approaches have been used to fabricate stable photoelastic waveguides with planarized surfaces on GaAs-AlGaAs heterostructures. The first approach uses tensile Ni/sub 3/GaAs stressors formed by metal-semiconductor reactions. The second approach uses inert, refractory and compressive stressors, such as RF sputtered W and RF co-sputtered WNi films. For comparison purposes, ridge waveguides have also been fabricated using the same heterostructure by a dry etching technique. Optical losses of photoelastic waveguides, measured by Fabry-Perot (FP) method at a wavelength of 1.53 /spl mu/m, are comparable to or better than those of the ridge waveguides. Material loss appears to be the primary loss mechanism in both photoelastic and ridge waveguides. These results indicate that the photoelastic waveguide processing technique reported in this study is a promising alternative to commonly used dry etching techniques for planarization.     

c-KIT expression enhances the leukemogenic potential of 32D cells

The growth of human leukemic cells in culture and in vivo is dependent upon the presence of hematopoietic growth factors. Most populations of human leukemic acute myeloblastic leukemia (AML) cells express c-Kit on their surface and respond to Kit ligand (KL) in culture. To determine if this interaction was of potential significance in vivo we used a mouse model system. 32D cells, a murine IL-3-dependent myeloid cell line, were rendered KL responsive by transfection of the murine c-Kit. After injection of 32D or 32D-Kit cells into syngeneic hosts, animals bearing 32D-Kit cells, but not 32D cells, became moribund and were killed. These animals had circulating leukemic blast cells, infiltration of bone marrow, spleen, brain, liver, lung, and kidney. Cells recovered from some of the animals continued to be dependent upon IL-3 or KL for growth while in other cases the cells were factor independent. This model illustrates that the constitutive expression of c-Kit enhances the leukemic potential of 32D cells. The model will be useful for studying the progression of leukemia in vivo and testing whether interruption of the interaction of Kit and KL can affect the growth of leukemic cells.     

Trends in Hydrological Parameters of a Southern Brazilian Watershed and its Relation to Human Induced Changes

The Piracicaba river basin is a subtropical watershed located in the southeastern region of Brazil. With an area of 12 400 km², the basin is a typical example of new landscape resulting from development in tropical and sub-tropical regions: establishment of intensive industrial and agricultural processes were followed by significant population growth and water management. This scenario has led to significant increase in water demand and decrease in water quality. The main objective of this study is the detection of changes in the patterns of flow and precipitation in the basin, and its possible relation to man-induced changes. Statistical analyses were performed on records of precipitation, evapotranspiration and streamflow, from 1947 to 1991. Precipitation and evapotranspiration totals showed significant increasing trends for the entire basin. From eight streamflow gauge stations, half showed significant decreasing trend. The most probable cause of such trends is the export of water from the basin to the metropolitan region of São Paulo city.     

Triangular ray-tube analysis of dielectric lens antennas

A new method of analysis for the radiation characteristics of dielectric lens antennas with arbitrary inner and outer surfaces is presented. The analysis is based on representing the feed illumination by a contiguous set of ray tubes and including the effects of surface reflections and ray divergence. Radiation patterns and the antenna gain are then computed by evaluating the closed-form expressions developed for the Kirchhoff's integral of the aperture fields. The validity of the analysis method has been demonstrated by comparing the computations with measured results of two different spherical lenses and a shaped lens configurations. The analysis method presented takes into account some of the practical aspects associated with lens design such as surface zoning to reduce the mass and surface matching to minimize the reflection loss     

Synthesis and properties of 2,2,6,6-tetramethyl-1-(1-phenethyloxy)piperidine,an initiator for living free radical styrene polymerization

Summary An initiator for living free radical polymerization may be prepared by trapping the benzylic ethylbenzene radical with the stable 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) radical. The adduct, 2,2,6,6-tetramethyl-1-(1-phenethyloxy)piperidine (TMPEP), smoothly undergoes thermal fragmentation at temperatures approaching 140° C to afford an active carbon radical capable of initiating polymerization and a passive mediating nitroxyl radical to reversibly cap and preserve the propagating polymer chain.     

Design of optimum signals for the simultaneous estimation of timedelay and Doppler shift

The problem of joint estimation of time delay and Doppler shift is considered from the point of view of the Wigner distribution of the signal. A very efficient method of obtaining the optimum signal with minimum estimation error based on the convexity of the design region is developed. Practical applications, however, require the signal to satisfy other constraints which present complications in acquiring the optimum signal. A design approach based on the method of simulated annealing is suggested to solve for the optimum signal under constraints. The performance of the signals so obtained is evaluated and compared with that of signals obtained by synthesis     

Preparation of Metal-Coated Carbon Fiber Reinforced Composites and Their Electromagnetic Properties

Medium temperature curing by infrared radiation was used to prepare electromagnetic wave absorbing multilayered plastic matrix composite materials containing metal-coated carbon fibers (MCFs). The electromagnetic properties of the materials were investigated by frequency scanning tests with microwave vector network analyzer. It is found that the electromagnetic parameters, mainly permittivity of the composites increase significantly with the addition of MCFs, which gives the composites good designability as thin, light-weight EM wave absorbers. It is also shown that MCFs can improve on the EM wave energy attenuating property of the composites by widening the work frequency band width and raising the absorptive peak     

Determining protein loop conformation using scaling-relaxation techniques

We recently developed a rapid loop closure algorithm in which bond lengths are scaled to constrain the ends of a segment to match a known distance and then gradually relaxed to their standard values, with boundary constraints maintained. Although the algorithm predicted the Zif286 zinc-finger loop to within approximately 2 A, it had a serious limitation that made its more general use tentative: it omitted the atomic environment of the loop. Here we report an extension of the algorithm to take into account the protein environment surrounding a given loop from the outset of the conformational search and show that it predicts structure with an efficiency and accuracy that could not be achieved without continuous environmental inclusion. The algorithm should be widely applicable to structure determination when complete experimental information is unavailable.     

Effects of chronic U50,488H treatment on binding and mechanical responses of the rat hearts

The effects of chronic injection of U50,488H (trans-3,4-dichloro-N-[2-(1-pyrrolidinyl)cyclohexyl]benzeacetamidel++ +), a selective kappa opioid agonist, on the properties of the binding sites of tritiated U69593 [(5 alpha,7 alpha,8 beta)-(-)-N-methyl-N-(7-(1-pyrrolidinyl)-1-oxaspiro (4,5)dec-8-yl)benzeneacetamide], another selective kappa opioid agonist, and mechanical responses to U50,488H of the heart were studied. Rats received injection twice a day with U50,488H for 4 days. Binding studies on the crude membrane homogenates revealed that there was no change in maximum binding, but a significant increase in Kd after the treatment, indicating that the number of kappa binding sites remained unchanged whereas the affinity of the binding sites to kappa-agonist decreased. The study on the mechanical responses to U50,488H in the isolated perfused heart preparation showed that although the agonist at 10(-6) M caused MR2266 reversible reductions in heart rate and force of contraction as well as ventricular ectopic beat in the heart of rats in the control group, its effects were absent in the U50,488H-treated group, indicating the development of tolerance to the mechanical effects of U50,488H on the heart. The results indicate that the development of tolerance to the mechanical effects of a kappa-agonist after chronic treatment with the agonist was not accompanied by down-regulation, but only a slight and significant reduction in affinity of kappa binding sites in the rat heart.     

Emergy account for biomass resource exploitation by agriculture in China

On the basis of Odum's ecological economic measure of emergy as embodied solar energy, a system account of biomass resource exploitation by agriculture in China 2004 is developed in this paper, which supplements a former study on corresponding long-term historical trends during 1978 to 2000 (Chen et al., 2006. Emergy-based analysis of the Chinese agriculture. Agriculture, Ecosystems and Environment 115, 161–173). The aggregate fluxes and indicators for biomass resource exploitation in China 2004 are calculated and illustrated when compared with those for 2000 to elucidate the latest status of the Chinese agriculture as the exploitation sector for biomass resource. Data sources and algorithm are presented in detail as basic references for related analysis involving the ecological economy of biomass exploitation in agriculture.