测量不确定度计算与实验方案的恰当选择

文章介绍了不确定度的定义及其一般计算公式，通过具体实例介绍了实验后不确定度的计算和实验前的误差估计。并对有多种可能的实验方案，利用误差估计的方法，选择出最佳的实验方案，使其不确定度最小。     

提高K-9曲拐质量的热处理工艺

K-9曲拐质量不合格主要是由于热处理后，珠光体数量太少所引起。因此应用正交试验，合理地选择了热处理工艺参数，提高了出炉温度，增加了珠光体数量，解决了K-9曲拐的质量问题。     

采用荷载平衡的概念表达预应力度及在初步设计中的应用

利用荷载平衡法的概念，将预应力度用等效荷载与外荷载的比值表达，设计可利用其比值确定预应力度，便其更简捷，明确，同时，提出了预应力度的真实值问题。     

彩色等离子体显示器的新进展

扼要地介绍了近年来世界上各大公司对彩色PDP的结构和驱动方法的改进 ,将现今彩色PDP的亮度、对比度和色纯度等主要性能与过去相比 ,得到明显的改善 ,达到了与高清晰度CRT相当的性能。     

GIS支持下的岩土工程勘察设计区域化

通过分析我国岩土工程勘察设计的现状和GIS在岩土工程勘察设计中应用的情况，提出了GIS支持下的岩土工程勘察设计区域化设想，论述了其结构体系，并展望其应用前景。     

TFT-AMLCD绝缘层a-SiNx∶H的制备

用等离子体化学气相沉积法(PECVD)在玻璃基板上淀积了厚度约1μm的非晶氮化硅(a-SiNx∶H)薄膜,在最佳工艺下得到薄膜的性能参数,折射率为1.8左右,光吸收系数为1.2×102～2×102cm-1,相对介电常数为7～8.4,电荷面密度为2.5×1012～3.1×1012cm-2.这种薄膜比较适合于用作薄膜晶体管-有源矩阵液晶显示器(TFT-AMLCD)的栅绝缘层.     

LS SIMD微处理器中的三组指令并发执行的设计

文章介绍了LS SIMD微处理器中实现三组指令并发执行的可能性和必要性，分析了三组指令并发执行给流水线带来的影响，并讨论了控制逻辑对三级指令并发执行的控制及其实现形式。     

管内材料高温放气性能的测试及应用研究

管内材料放气性能的优劣直接影响着整管的性能和寿命.本文简介了测试管内材料高温放气性能的原理、装置和方法.文中列举的几项应用实例表明,本项测试结果对产品质量控制、工艺技术改进和材料进厂检验及国产化攻关都具有指导意义.     

Synthesis and structural characterization of methacrylic acid/octadecyl acrylate‐graft‐poly(methylhydrosiloxane) by hydrosilylation

Methylmethacrylate (MMA) and octadecyl acrylate (OA) were grafted to poly(methylhydrosiloxane) (PMHS) by hydrosilylation, respectively, with hexachloroplatinic acid as catalyst, and the former was further hydrolyzed to prepare methacrylic acid (MAA)‐graft‐PMHS under the alkaline condition. Through orthogonal experiment, main factors affecting the graft reaction between OA and PMHS were discussed and arranged in a decreasing order according to their abilities of the effect on the hydrosilylation of OA with PMHS: catalyst dosage, reaction temperature, reaction time, material ratio, and solvent dosage. It was found that the hydrosilylation of OA with PMHS was easier to that of MMA with PMHS. Under optimal conditions, the grafting ratios of MMA with PMHS and OA with PMHS reached about 90 and 95%, respectively. FTIR and ¹H NMR spectra indicated that the hydrosilylation reactions followed the Markovnikov's rule and played a strong preference toward β‐1,2‐addition. The test of contact angle indicated that surface energy of a system was mainly dependent on the polar groups. The surface energy of OA‐graft‐PMHS (35.07 mN/m) was similar to those of PMHS (35.62 mN/m) and polyoctadecyl acrylate (36.57 mN/m), and lower than that of MAA‐graft‐PMHS (43.50 mN/m). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

高喷煤比操作对焦炭劣化的影响

为考查提高喷煤量对焦炭在炉内劣化的影响,在宝钢高炉上进行了风口取样研究.结果表明,喷煤量达到200 kg/t以上时焦炭劣化严重.高炉生产实绩回归显示,焦炭的热性能对高炉透气性的影响比冷强度显著.分析认为焦炭热性能指标CRI、CSR对高炉高煤比操作更重要.借此还提出了提高喷煤量和改善焦炭质量需加强研究的课题.