Array designs for amplitude and phase control of millimeter-wave beams

New array design concepts are described for the phase and amplitude control of millimeter and submillimeter-wave beams. Phase shifter array designs providing increased phase range and wider bandwidth are described. Techniques involving the integration of gain-producing elements as well as tuning elements on a single array are proposed for application to high-performance beam control and beam shaping. These concepts should facilitate the further development of quasi-optical solid state device-based arrays for application to millimeter-wave electronic systems.     

Designing the MPC105 PCI bridge/memory controller

The MPC105 peripheral component interconnection bridge/memory controller provides a platform-specification-compliant bridge between Power PC microprocessors and the PCI bus. With it, designers can create systems using peripherals already designed for a variety of standard PC interfaces. This bridge chip also integrates a secondary cache controller and high-performance memory controller that supports DRAM or synchronous DRAM and ROM or flash ROM     

Rate sensitivity of high birefringent fiber optic sensors underlarge dynamic loads

New experimental studies on the effects of large dynamic compressive loads on highly birefringent optical fibers are presented. The intensity rate of applied dynamic loads ranged between 2.18-6719 KN/m-sec. A Fibercore (previously York) HB600 Bow-Tie fiber with an initial beat length of 1.16 mm was employed in the present study. Sensor response is discussed in terms of the effects of force amplitudes and velocities on the calibration parameter T_f. T_f is a function of the amplitude as well as the velocity of applied loading. Therefore, calibration of the sensor should be achieved through regression analysis of the load-fringe data for the entire spectrum of the desired force velocities. The ramification of this finding is that a single experiment for the measurement of T_f cannot provide the required parameters for calibration. This further implies that the change in beat length is also dependent on the amplitude and velocity of loading. The suggested method takes both effects into account through empirical analysis of experimental data     

Free vibration of laminated plates using a finite strip method based on a higher-order plate theory

The finite strip method based on the higher-order plate theory is developed for determining the natural frequencies of laminated plates. This method can accurately predict the through thickness effect of transverse shear deformation. Furthermore, only a few degress of freedom are required in the finite strip method. Some numerical results for various span-to-thickness ratios, material properties and stack sequences are presented for illustrative purposes. The present model provides a better way to obtain more accurate natural frequency results.     

Self-care behaviors, self-efficacy, and social support effect on the glycemic control of patients newly diagnosed with non-insulin-dependent diabetes mellitus

The purpose of this study was to explore the glycemic control and influencing factors in outpatients newly diagnosed with non-insulin-dependent diabetes mellitus (NIDDM). By purposeful sampling, data were collected from 130 outpatients with NIDDM at one medical center in Kaohsiung. The results indicated: (1) the mean value for HbA1C was 7.12%; and 63.1% of the patients belonged to moderate to well controlled group; (2) male patient's HbA1C value was significantly lower than female patient's; patients with no religious belief also had a lower HbA1C value than patients with a religious background; (3) there were strongly negative correlations between self-care behaviors, social support, and self-efficacy and HbA1C; (4) using a multiple stepwise regression analysis, religious belief and self-care behaviors were found to explain 10.9% variance of HbA1C level. The results of this study could be used as a reference for diabetes health education program.     

Millimeter-wave asymmetric Fabry-Perot modulators

We have designed, fabricated, and characterized GaAs-AlGaAs (λ=864 nm) asymmetric Fabry-Perot modulators with ≈37 GHz modulation frequency response, comparable to the fastest waveguide modulators. The modulation response saturates at high optical powers due to saturation of the excitonic absorption and heating effects, but the frequency response is independent of the incident optical intensity, since it depends only on the RC time constant, and not on the carrier transit time. The device design takes advantage of the fact that the quantum-confined Stark effect is more pronounced at some distance from the absorption edge to achieve a modulator with ⩾20 dB contrast and ≈3 dB insertion loss for ±2 V operating voltage, but only 21 fF capacitance. The DC bias used to move the operating point off the absorption edge has the additional benefits of improving the linearity and chirp of the device, as well as the saturation intensity. Here we present measurements of the modulation and photocurrent responses of the modulators, calculate the RC and transit times for the device, analyze the saturation mechanisms, and discuss the linearity and chirp of the device from the perspective of a high-speed digital optical communications system     

Synthesis and Properties of the Bi-Based Superconducting Powder Prepared by the Pechini Process

Bi-based superconductors are of great interest in high-temperature superconductors. We describe what is believed to be the first synthesis of these materials using the Pechini process, a low-temperature synthetic method that often yields inorganic oxide of excellent phase purity and well-controlled stoichiometry. Using this process, it has been possible to synthesize phase-pure Bi-2223 phase by calcining the appropriate polymeric precursors in air at 800°C for several hours. The superconductivity studies show that the Pechini-synthesized materials appear to offer high-quality performance.     

γ 射线引发 VAc 乳液聚合以制备白乳胶的动力学及工艺条件研究

研究了ＶＡｃ的辐射乳液聚合动力学，并对其聚合工艺条件作了初步探索。得出ＶＡｃ乳液在进行辐射聚合时，成核期结束较早（转化率在１０％以下），有相当长的恒速期存在。乳胶粒子直径在０．５～３μｍ之间，比一般的乳液聚合乳胶粒子要大。同时从动力学数据还可以看出几种成核机理（胶束成核，水相成核和液滴成核）同时存在，由此对试验条件提出了相应的要求。     

Mast cell activation and migration to lymph nodes during induction of an immune response in mice

The mast cell response in skin and lymph nodes was examined during the sensitization phase of dinitrofluorobenzene (DNFB)-induced contact hypersensitivity in mice. Degranulation of 62% of mast cells in DNFB-exposed skin was evident within 30 min of a dual application of DNFB, reaching a peak of 77% at 24 h, and persisting in 42% after 5 d. Abundant expression of macrophage inflammatory protein (MIP)-1alpha and MIP-1beta mRNAs and proteins was observed in keratinocytes, and mast cell degranulation was significantly inhibited after administration of neutralizing antibodies to MIP-1alpha, but not MIP-1beta. During DNFB sensitization, the mast cell density in the skin decreased by half, concurrent with a fivefold expansion of mast cell numbers in draining lymph nodes. Fluorescent-labeled mast cells injected into the skin appeared in draining lymph nodes after application of DNFB, followed by subsequent migration to the spleen. In lymph nodes, mast cells were an abundant and predominant source of MIP-1beta, neutralization of which partially inhibited T lymphocyte recruitment. These results indicate that mast cells contribute to the induction of this primary immune response by activation at and migration from the site of antigen encounter to draining lymph nodes, wherein they mediate T lymphocyte recruitment by production of MIP-1beta.