The synthesis of block copolyetherketones based on 4,4′‐dichlorodiphenylketone,phenolphthaleine, and bisphenol A and investigation of their properties

Block structured polyethers based on phenolphthaleine, 4,4′‐dichlorodiphenylketone, and bisphenol A with different degrees condensation (n = 1, 5, 10, and 20) were synthesized by means of acceptor‐catalytic polycondensation. Equaimolar quantities of chloranhydrides of iso‐ and terephthalic acids were used. Higher molecular masses were obtained from longer oligoketones with higher condensation degrees. Better molecular packing, increased thermal and mechanical properties were obtained with higher condensation degrees of oligoketones. © 2007 Wiley Periodicals, Inc. JAppl Polym Sci, 2008     

Use of postconsumer polyethylene in blends with polyamide 6: Effects of the extrusion method and the compatibilizer

Blends of polyamide and high‐density polyethylene show adequate properties for a large range of applications: they are used for the production of filaments, containers, and molding resins. The effect of the addition of 2 wt % of a compatibilizer, maleic anhydride grafted polyethylene, to the blend was studied and compared to the use of postconsumer polyethylene. The samples were extruded with single‐ and twin‐screw extruders with 25, 50, or 75 wt % f polyethylene, and the test specimens, molded by injection, were characterized by stress–strain tests, thermal properties, and morphologies. Processing the blends with postconsumer polyethylene in both extruders improved the mechanical properties in comparison to the blends processed with high‐density polyethylene and the compatibilizer. The morphologies of these blends showed that there was a decrease in the domain size of the disperse phase with the use of the compatibilizer or postconsumer polyethylene. The results indicate that for this blend, postconsumer polyethylene substituted, with advantages, for the necessity of a compatibilizer and the use of the high‐density polyethylene. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008.     

Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Engineering extruded collagen fibers for biomedical applications

Extruded collagen fibers constitute a promising biomimetic scaffold for tissue engineering applications. In this study, we compared the structural, thermal, and mechanical properties of fibers produced from either NaCl or poly(ethylene glycol) with a number-average molecular weight of 8000 (PEG 8K), the only two coagents that have been used in the fabrication process. As novel, we report the fabrication of fibers with properties similar to native or synthetic fibers using other coagents. NaCl derived fibers were characterized by higher thermal stability (p < 0.026), stress (p < 0.001), and modulus (p < 0.0025) values than PEG 8K, whereas the latter yielded more extendable fibers (p < 0.012). Poly(ethylene glycol)s with number-average molecular weights of 200 and 1000 produced fibers with similar mechanical properties (p > 0.05) that were thinner (p < 0.033), stiffer (p < 0.022), and less extendable (p < 0.0002) than those of PEG 8K. Poly(vinyl alcohol) (PVA) with a number-average average molecular weight of 9–10,000 and PEG 8K yielded fibers with similar diameters and stress-at-break values (p > 0.05); however, the poly(ethylene glycol) derived fibers were more extendable (p < 0.0003), whereas the PVA fibers were stiffer (p < 0.029). Gum-arabic- and soluble-starch-derived fibers were of similar tensile strength, extendibility, and stiffness (p > 0.05). In this in vitro study, the thickest (p < 0.011) and the weakest (p < 0.0066) fibers were produced in the presence of sodium sulfate. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A study on dynamic friction of different spun yarns

This article presents the results from a study of yarn-to-yarn (YY) and yarn-to-metal (YM) frictions conducted on ring, rotor, air-jet, and open-end friction (OE friction) spun yarns at different relative speeds and input tensions. The results indicate that the behavior of frictions for YY is different than that of YM. In case of YY friction, OE friction yarn shows maximum friction followed by rotor, air-jet, and ring spun yarns; however, a reverse order is noticed for YM friction. The relative speed and input tension have significant influence on the frictional behavior of spun yarns. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Phase Current Unbalance Estimation in Multiphase Buck Converters

A method for estimating the phase current unbalance in a multiphase buck converter is presented. The method uses the information contained in the voltage drop at the input capacitor's effective series resistance (ESR) to estimate the average current in each phase. Although the absolute estimation of the currents depends on the value of the ESR and is therefore not absolutely accurate, the relative estimates of the currents with respect to one other are shown to be very accurate. The method can be implemented with a low-rate down-sampling A/D converter and is not computationally intensive. Experimental results are presented, showing good agreement between the estimates and the measured values.     

Preparation of Phase-Pure M1 MoVTeNb Oxide Catalysts by Hydrothermal Synthesis—Influence of Reaction Parameters on Structure and Morphology

This work presents a detailed investigation of the preparation of MoVTeNbO _x catalysts by hydrothermal synthesis. Phase-pure synthesis of M1 has been achieved applying the metals in a molar ratio Mo/V/Te/Nb = 1/0.25/0.23/0.12. Raman, UV/Vis spectroscopy, and SEM/EDX analysis show that the elements are inhomogeneously distributed in the initial suspension that is formed after mixing the metal salts in an aqueous medium. Iso- and heteropoly anions of molybdenum, free telluric acid as well as supra-molecular polyoxometalate clusters are observed in the solution, whereas all metals have been found in the precipitate. Complete rearrangement of molecular building blocks under hydrothermal conditions is essential for formation of phase-pure materials. Optimized synthesis conditions with respect to temperature and time result in the formation of a precursor consisting of nano-structured M1 characterized by an extended periodic organization in the [001] direction and a fairly homogeneous distribution of the elements. Residual ammonium containing supra-molecular species in the precursor result in the formation of phase mixtures during the subsequent crystallization by heat treatment in inert gas. Phase-pure M1 exhibits a distinct degree of flexibility with respect to the chemical composition that becomes obvious by incorporating Nb not exclusively into pentagonal bi-pyramidal units, but also into octahedral coordinated positions as shown by EXAFS. Anisotropic growth of the needle-like M1 crystals has been observed during the final heat treatment performed at 873–923 K in inert atmosphere disclosing a potential method to control the catalytic properties of MoVTeNbO _x catalysts.     

Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy

A mild thermal treatment of wood leads to improved macroscopic properties (dimensional stabilization and resistance against fungal degradation). The chemical modifications induced by the thermal treatment were investigated by means of DRIFT spectroscopy on wood blocks in order to explain the new macroscopic properties on a molecular level. The formation of new ether linkage was observed in addition to the well-known acidic hydrolysis reactions of wood. Fungal attack was found to take place even after thermal degradation of pentosanes by a standard oxidative way. A competition between depolymerization and condensation reactions was observed.     

MOEMS tuning element for a Littrow external cavity laser

A miniature grating-tunable external cavity laser diode constructed using microoptoelectromechanical systems (MOEMS) technology is described. The tuning element is a vertically etched blazed grating mounted on a compound flexure, which consists of a cantilever in series with a portal frame. The flexure is deflected using comb electrostatic drives to rotate and translate the grating. The tuning element is prototyped using deep reactive ion etching of bonded silicon-on-insulator (SOI) material. Interferometric measurements of electromechanical performance are presented, and departures from the ideal behavior are identified. Electrostatic tuning of a Littrow external cavity laser over a range of 20 nm using a 50-V drive is demonstrated.     

Synchronised carrier-based SVPWM signal generation scheme for the entire modulation range extending up to six-step mode using the sampled amplitudes of reference phase voltages

The issues in synchronised implementation of space vector-based pulse width modulation (SVPWM) signal generation are addressed on a conventional DSP platform. With the present day digital signal processors (DSPs) with clock over 10 MHz, it is possible to include additional tasks for synchronisation in the interrupt service routine (ISR). Also, the task of the synchronisation can be easily accommodated within the same ISR without disturbing the time critical pulse width modulation (PWM) operation. The authors systematically present the additional software requirements to determine the time period proportional to the half carrier switching time interval that is required for the synchronisation. First, the DSP implementation of the conventional multi-level SVPWM based on the sampled amplitudes of reference voltages is presented and then the additional requirements to maintain the PWM in synchronisation are discussed. The simulation results as well as experimental results are presented for a five-level PWM signal generation. A five-level inverter configuration, using a 1.5 kW open-end winding induction motor drive, is used for experimentally verifying the SVPWM