Exchange and oxidation of CO on O-predosed Rh---Al2O3 and Rh---CeO2 catalysts

Exchange and oxidation of C¹⁶O were investigated at 450°C on ¹⁸O-predosed Rh and Pt catalysts supported on A1₂O₃, CeO₂ and CeO₂-Al₂O₃. In all cases, a rapid exchange of C¹⁶O with the surface can be observed. CO oxidation leads to C¹⁶O₂, C¹⁶O¹⁸O and C¹⁸O₂. Significant formation of C¹⁶O₂ is due to the relatively high ¹⁶O coverage in reaction resulting from the C¹⁶O exchange and from an exchange between O surface species and ¹⁶O internal atoms. Hydrogen is also formed via a water-gas shift reaction (CO + surface OH) in higher proportion on CeO₂-containing catalysts than on A1₂O₃. Chlorine inhibits all the reactions (exchange, oxidation and WGS) and particularly the internal exchange.     

Special features of manufacturing highly porous materials from silicon nitride,silicon oxynitride,and sialons

Results obtained in a study of factors that affect shaping and sintering of highly porous materials are presented. A technology providing highly porous silicon nitride materials that is based on shaping preliminarily fabricated pieces of thermoplastic slip makes it possible to use initial silicon powders of different dispersities. Highly porous materials can also be produced on the basis of sialons and exhibit a diminished thermal conductivity and a heat resistance at the level of similar silicon nitride materials.Translated from Ogneupory i Tekhnicheskaya Keramika, No. 11, pp. 8 – 13, November, 1996.     

Transconductance and mobility of Si:B delta MOSFETs

Delta-doped MOSFETs have been fabricated in MBE-grown silicon using for the first time boron as the dopant within the delta layer. Current-voltage characteristics have been measured, and secondary ion mass spectrometry (SIMS) is used to confirm the location of the delta layer and the extent of layer broadening by diffusion during processing. Precise threshold voltages of the devices are difficult to determine since the devices (which all operate in depletion mode) take several volts to switch off. Transconductances of the devices have been measured, and it is shown how analysis of these results can yield estimates of the carrier mobility for transport along the delta layers despite the uncertainty in the threshold voltage. A clear transition is observed in the results which is attributed to the formation of a parasitic surface-channel field-effect transistor, providing conclusive evidence that the devices are conducting along a delta channel for part of the measured range of applied gate biases     

Four state binary QAM trellis code better than known codes

Presents a new one-memory quaternary four-state trellis code, and its four-state binary equivalent code based on a QAM constellation which is 0.52 dB better than the four-state Ungerboeck code.<>     

Crystal structure of tRNA-guanine transglycosylase: RNA modification by base exchange

tRNA-guanine transglycosylases (TGT) are enzymes involved in the modification of the anticodon of tRNAs specific for Asn, Asp, His and Tyr, leading to the replacement of guanine-34 at the wobble position by the hypermodified base queuine. In prokaryotes TGT catalyzes the exchange of guanine-34 with the queuine (.)precursor 7-aminomethyl-7-deazaguanine (preQ1). The crystal structure of TGT from Zymomonas mobilis was solved by multiple isomorphous replacement and refined to a crystallographic R-factor of 19% at 1.85 angstrom resolution. The structure consists of an irregular (beta/alpha)8-barrel with a tightly attached C-terminal zinc-containing subdomain. The packing of the subdomain against the barrel is mediated by an alpha-helix, located close to the C-terminus, which displaces the eighth helix of the barrel. The structure of TGT in complex with preQ1 suggests a binding mode for tRNA where the phosphate backbone interacts with the zinc subdomain and the U33G34U35 sequence is recognized by the barrel. This model for tRNA binding is consistent with a base exchange mechanism involving a covalent tRNA-enzyme intermediate. This structure is the first example of a (beta/alpha)-barrel protein interacting specifically with a nucleic acid.     

193-nm lithography

The trend in microelectronics toward printing features 0.25 μm and below has motivated the development of lithography at the 193-nm wavelength of argon fluoride excimer lasers. This technology is in its early stages, but a picture is emerging of its strengths and limitations. The change in wavelength from 248 to 193 nm will require parallel progress in projection systems, optical materials, and photo-resist chemistries and processes. This paper reviews the current status of these various topics as they have been engineered under a multiyear program at MIT Lincoln Laboratory     

The natural killer cell receptor specific for HLA-A allotypes: a novel member of the p58/p70 family of inhibitory receptors that is characterized by three immunoglobulin-like domains and is expressed as a 140-kD disulphide-linked dimer

Human natural killer (NK) cells express inhibitory receptors that are specific for different groups of HLA-C or HLA-B alleles. The majority of these receptors belong to the immunoglobulin (Ig) superfamily and are characterized by two or three extracellular Ig-like domains. Here we describe a novel inhibitory NK receptor that is specific for a group of HLA-A alleles. The HLA-A3-specific NK cell clone DP7 has been used for mice immunization. Two mAbs, termed Q66 and Q241, bound to the immunizing clone and stained only a subset of NK cell populations or clones. Among Q66 mAb-reactive clones, we further selected those that did not express any of the previously identified HLA-class I-specific NK receptors. These clones did not lyse HLA-A3+ (or -A11+) target cells, but lysis of these targets could be detected in the presence of Q66 or Q241 mAbs. On the other hand, target cells expressing other HLA-A alleles, including -A1, -A2, and -A24, were efficiently lysed. Moreover, none of the HLA-C or HLA-B alleles that were tested exerted a protective effect. Q66+, but not Q66- NK cell clones, expressed messenger RNA coding for a novel 3 Ig domain protein homologous to the HLA-C (p58) and HLA-B (p70) receptors. The corresponding cDNA (cl.1.1) was used to generate transient and stable transfectants in COS7 and NIH3T3 cell lines, respectively. Both types of transfectants were specifically stained by Q66 and Q241 mAbs. Since the cytoplasmic tail of Q66-reactive molecules was at least 11 amino acid longer than the other known p58/p70 molecules, we could generate an antiserum specific for the COOH-terminus of Q66-reactive molecules, termed PGP-3. PGP-3 immunoprecipitated, only from Q66+ NK cells, molecules displaying a molecular mass of 140 kD, under nonreducing conditions, which resolved, under reducing conditions, in a 70-kD band. Thus, differently from the other p58/p70 receptors, Q66-reactive molecules appear to be expressed as disulphide-linked dimers and were thus termed p140. The comparative analysis of the amino acid sequences of p58, p70, and p140 molecules revealed the existence of two cysteins proximal to the transmembrane region, only in the amino acid sequence of p140 molecules.     

Autonomous vehicles

There are various kinds of autonomous vehicles (AV's) which can operate with varying levels of autonomy. This paper is concerned with underwater, ground and aerial vehicles operating in a fully autonomous (nonteleoperated) mode. Further this paper deals with AV's as a special kind of device, rather than full-scale manned vehicles operating unmanned. The distinction is one in which the AV is likely to be designed for autonomous operation rather than being adapted for it as would be the case for manned vehicles. We provide a survey of the technological progress that has been made in AV's, the current research issues and approaches that are continuing that progress, and the applications which motivate this work. It should be noted that issues of control are pervasive regardless of the kind of AV being considered, but that there are special considerations in the design and operation of AV's depending on whether the focus is on vehicles underwater on the ground, or in the air. We have separated the discussion into sections treating each of these categories     

Cyclobutanones as markers for irradiated samples of Brie and Camembert cheese

The feasibility of applying a chemical method based on the formation of 2-alkylcyclobutanone to samples of irradiated soft cheese (Brie and Camembert) was investigated. Significant quantities of 2-dodecylcyclobutanone (DCB) and 2-tetradecylcyclobutanone (TCB) were detected in both types of irradiated cheese and are proposed as qualitative markers. Other members of the cyclobutanone family (decyl- and tetradecenyl-) are also thought to be present but could not be substantiated due to a lack of authentic standards. These compounds were absent from the unirradiated samples. Results also show a significant linear relationship between the irradiation dose (1 to 8 kGy) and the amount of DCB and TCB detected in the cheese.     

Improved accuracy of burn wound assessment using laser Doppler

The utility of the laser Doppler for determining burn depth has been questioned because of problems with technology and methodology. This study prospectively evaluates the ability of a new laser Doppler technique to predict burn healing time. Using the Periflux System 4000 laser Doppler, readings were taken on 305 burns (147 patients) on postburn day 3 or 4. Sixty-six wounds were used to derive a predictive function (phase I) and 152 wounds were used to test the function (phase II). Blood flow dynamics (flux), microvascular dilation capacity of the wounds to beat stress, and flow motion wave pattern (vasomotion) were studied using the laser Doppler, and seven parameters were evaluated to determine their relative contribution to the prediction of healing time. These parameters are hyperemic flux (flux value after heating to 42 degrees C), average hyperemic wave amplitude (AHWA), number of average flux units >100(F100), number readings with wave amplitude 75 (A5), average flux change (AFC), percentage of average flux increase, and relative flow capacity (RFC = AFC/average hyperemic flux). After readings were made, the wounds were observed and divided into two groups: those that healed in less than 14 days and those that healed or were grafted after 14 days. A step-wise discriminant analysis was used to assess the relative contribution of the Doppler-derived measures to healing time prediction. AHWA, F100, and RFC were included in the final discriminant function explaining 72% of the healing time variance (Wilks' lambda value 0.28; p value <0.0001). Predicted outcome = 0.05(AHWA) + 0.31(F100) + 5.0(RFC) - 2.3. With this derived function, there is 94% accuracy in the prediction of burn wound healing time compared with a physician predictive accuracy of 70%.