Poly-functional Catalyst Development for Benzene Production from Alkyl-aromatic Mixture via Hydrodealkylation

Development of a poly-functional catalyst that has higher hydrodealkylation activity based on 15% Cr/γ- Al₂ O₃ was researched for benzene production from an alkyl-aromatic mixture via hydrodealkylation. For this goal, the effects of the promoters like Fe, Co, or Ni and their concentrations on the activity of a Cr/Al₂ O₃ catalyst were investigated. Toluene + n-heptane + tetrahydrotiophene (89:10:1 w%) model mixture, which has the same content as industrial aromatics, was used as feedstock. The activities of catalysis in reactions of hydrodealkylation, hydrocracking, and hydrogenolize with respect to conversions of toluene, heptane, and tetrahydrotiophene were tested, respectively. As to the obtained results, the catalyst including 5% Fe has a higher hydrodealkylation activity, compared to the catalyst including Co, and especially to the alumocrom catalyst not including a promoter, while it has a lower coke formation and reduced activity to the catalyst including Ni.     

Effect of sodium carbonate on the oxidation of sublimates during niobium electron-beam remelting

The effect of sodium carbonate additions on phase formation during the air oxidation of the sublimates of niobium electron-beam remelting is studied by derivatography, X-ray diffraction analysis, and electron-probe microanalysis. The composition of the oxidation products changes with the heating temperature. The formation of sodium niobates and aluminates is detected by X-ray diffraction analysis at temperatures higher than 600°C. The oxidation of the sublimates is completed by the formation of sodium metaniobate and aluminate. Sodium carbonate additions are shown to accelerate the oxidation of the sublimates.     

Influence of stage of cycle, corpus luteum location, follicle size, and number of large follicles on estradiol-17 beta concentrations in bovine follicles

Concentrations of estradiol-17 beta in follicular fluid were correlated to follicular size, stage of estrous cycle, location of corpus luteum, and presence of large follicles. Paired ovaries were obtained from 481 nonpregnant cows at slaughter and follicles were classified as ipsilateral or contralateral to the corpus luteum. Follicular fluid estradiol-17 beta concentrations from 2494 small, 1485 medium, and 396 large follicles were quantified by radioimmunoassay. Stage of estrous cycle was estimated by visual examination of the corpus luteum. Follicles in stage 1 of the estrous cycle (d 1 to 4) had the highest estradiol-17 beta concentration and the smallest mean follicular diameter. Location of follicles relative to the corpus luteum had no influence on estradiol-17 beta concentrations. As follicular size increased, concentration of estradiol-17 beta also increased. The presence of a single large follicle did not affect the concentration of estradiol-17 beta in medium or small follicles. In contrast, if multiple large follicles occurred in the same cow, concentrations of estradiol-17 beta were significantly lower in medium but not small follicles.     

High-temperature sensible-heat storage options

Alkali-metal carbonate salts meet the requirements for high-temperature solar central receiver systems, but because of their corrosiveness they present special problems in the design of storage tanks. In order to reduce corrosion and temperature sufficiently to retain strength in the storage containing wall, internal and thermal insulation is required. We present design options and operation criteria for sensible-heat, molten-salt storage with internal insulation.     

A technique for controlling the placement of the thin area in electrojetpolished tem foils of tungsten

Recently we have been making extensive use of TEM observations of grain boundaries in a research program concerned with the deformation behavior of tungsten bicrystals. A major problem in this research involved the preparation of thin foils which contained the grain boundary in the electron tranparent region, since standard cell type electrojetpolishing techniques do not allow adequate control of the placement of the thin area. Since the grain boundary comprises a very small percentage of a foil, good thin area placement control is critical to obtaining useful samples consistently. Masking techniques which use electrically insulating lacquers are not precise enough to guarantee the position of the thin area. However, we have found that one can use the dishing characteristic of the jetpolisher (i.e., the fact that the center of the foil thins faster than the perimeter) in conjunction with the masking technique to predict the position of the thin area within a preferentially thinned region created by the masking procedure outlined below. This is the essence of the procedure outlined below.     

Diel Vertical Migration of Round Goby Larvae in the Great Lakes

One hypothesis for the transcontinental and intra-Great Lakes basin transfer of round gobies (Neogobius melanostomus) has been that round gobies were pumped into the ballast water of ships. During June 2005 in Lake Erie, we obtained evidence of a vertical migration of round goby larvae, when we collected 167 round goby larvae in surface ichthyoplankton net tows at night and zero during day. These results complemented similar findings from the Muskegon River estuary of Lake Michigan during 2003 and 2004, documenting diel vertical migration for the first time in larval round gobies. We suggest vertical migration behavior may have allowed larval round gobies to be transported to and within the Great Lakes via ballast water and dispersed in the Great Lakes via advection of 6.5–8.5-mm long larvae at the surface. Based on our results, if ballast water was only taken on near the surface during daylight hours from May through September when larval round gobies were present, it would have mitigated the spread of round gobies throughout the Great Lakes.     

Performance of a non‐load‐bearing steel stud gypsum board wall assembly: Experiments and modelling

A gypsum wall assembly was exposed to an intense real‐scale compartment fire. For the wall assembly, temperatures were measured at the exposed face, within the stud cavity, and at the unexposed face during the fire exposure. Total heat flux gauges were used to measure the temporal variation of the energy incident on the walls, and cameras, both visual and infrared, were used to image the unexposed face of the wall assembly during the fire exposure. The behaviour of the wall assembly under the fire load is discussed as are current model results for a simulation of the fire test. Copyright © 2006 John Wiley & Sons, Ltd.     

Analysis of the Survivability of GaN Low-Noise Amplifiers

This paper presents a detailed analysis of the stressing mechanisms for highly rugged low-noise GaN monolithic-microwave integrated-circuit amplifiers operated at extremely high input powers. As an example, a low-noise amplifier (LNA) operating in the 3-7-GHz frequency band is used. A noise figure (NF) below 2.3 dB is measured from 3.5 to 7 GHz with NF<1.8 dB between 5-7 GHz. This device survived 33 dBm of available RF input power for 16 h without any change in low-noise performance. The stress mechanisms at high input powers are identified by systematic measurements of an LNA and a single high electron-mobility transistor in the frequency and time domains. It is shown that the gate dc current, which occurs due to self-biasing, is the most critical factor regarding survivability. A series resistance in the gate dc feed can reduce this gate current by feedback, and may be used to improve LNA ruggedness     

Calcium and phosphorus levels as indices of textured milk proteins being substituted for meat proteins

Textured milk proteins were tested in a meat model system with an exchange level of 34-87% of the meat proteins. The correlation between the substitution index and the calcium and phosphorus content was statistically significant.