Millimeter-scale actuator with fiber-optic roller bearings

A technique combining semiconductor processing and fiber-optic technology has been developed to micromachine a 1-cm² silicon die that rolls on two wheels above a flat substrate. Each wheel consists of a glass capillary surrounding a fixed solid glass fiber axle. A 100-silicon die is anisotropically etched to create two variable width v-grooves. Each v-groove has a wide center section and two narrow ends, which is schematically illustrated as -==-. The capillary is free to rotate about the axle in the wide v-groove section while the axle is anodically bonded into the narrow v-groove ends. The gap between the die and the substrate is determined by the narrow v-groove width, fiber diameter, and capillary wall thickness. Several rolling die have been fabricated with 210-120 μm gaps. The coefficient of static friction (μ_S) has been investigated on several substrates as a function of the load on the die. Values for μ_S are compared to an unetched die with a silicon nitride coating. With loads ranging from 0-10 grams, the wheels reduce μ_S by more than 50% on borosilicate glass     

D-KAT: a deep knowledge acquisition tool

Abstract: This paper describes a system of shallow and deep knowledge acquisition and representation for diagnostic expert systems. The acquisition system is integrated into a diagnostic expert system shell. Shallow knowledge is represented in a failure model as a set of cause-effect relations among the possible faults, while deep knowledge is represented in three deep models: a functional, a deep causal and a taxonomic model. The acquisition and the representation of all the models are fully integrated. The deep knowledge is used by the final expert system in order to provide the user with deep explanations of the cause-effect relations of the failure model.     

Drugs, memory, and metamemory: A dose-effect study with lorazepam and scopolamine.

This experiment was designed to use the graded dose-related amnesia produced by the benzodiazepine lorazepam (1.0, 2.0 mg/70 kg, oral) and the anticholinergic scopolamine (0.3, 0.6 mg/70 kg, subcutaneous) as a tool to explore the cognitive and neurochemical mechanisms underlying metamemory in the judgment of learning paradigm, with a placebo-controlled independent groups design in healthy volunteers (n=12/group). Results provide evidence for a pharmacological dissociation between effects on memory versus metamemory (relative accuracy of item-by-item monitoring) across a range of levels of memory performance and suggest that the drugs selectively impair those aspects of metamnemonic monitoring that require participants' awareness of their overall current state of functioning (absolute accuracy of prospective item-by-item monitoring, prospective global monitoring) but not those that rely solely on assessment of individual item characteristics (relative accuracy of item-by-item monitoring). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Direct preparation of particles from liquid suspension for ESEM or SEM analysis

A simplified method for the preparation of particles from liquid suspensions has been developed. Particles are deposited directly on carbon planchets for rapid analysis by environmental scanning electron microscopy or by conventional scanning electron microscopy after an additional drying step. This is accomplished by filtering the liquid through thin carbon planchets. Three different grades of graphite were investigated for their suitability as the source material for these planchets. The high quality isomolded graphite is recommended for the filtration and direct observation of particles by electron microscopy. This technique is demonstrated for particles in hydraulic fluid and aquatic suspended particulate material from a natural water source.     

A Programmable Pulse Sequence Generator for an NMR Relaxometer

A pulse sequence generator for NMR relaxometer is described. The operation mode is loaded into the internal memory of the device by a program from a personal computer via a PCI bus. The project is realized on two MAX7000S and Cyclone (Altera) chips using the Qartus II 4.0 software. The basic parameters of the device are as follows: the minimal pulse length is 50 ns, the time resolution is 10 ns, the maximum number of pulses is 1024, and the number of controlled output channels is 8. This device, operating in the automatic mode as part of the hardware-software NMR system, makes possible recording, processing, and storing experimental results in electronic form.     

Mass customization of medical devices and implants: state of the art and future directions

The medical field is one in which the need for customization can be clear cut, as providing tailored devices and implants for unique physiologies can provide for a better overall treatment than the use of 'off the shelf' devices and implants. Customization in the production of medical products can be roughly divided into consideration of medical devices, and of implantable parts or systems. The present paper outlines the current state of the art in both of these areas, presents details of projects that are ongoing at the University of Leeds and outlines future research directions.     

Technological strategies to improve photostability of a sunscreen agent

Due to the reduction of the ozone layer, there is an increasing need of effective UV protection systems with minimized side-effects. Trans-2-ethylhexyl- p -methoxycinnamate ( trans -EHMC) represents one of the most widely used sunscreen compound. Several studies demonstrated that trans -EHMC is unstable following UV irradiation both in solution and in emulsion formulations. Moreover, various reports of photocontact sensitization induced by trans -EHMC have appeared in the literature. Consequently, in order to ensure adequate efficacy and safety for this sunscreen agent, there is a need for new carrier systems to enhance trans -EHMC photostability. In the present study the photostability of the filter in different formulation types (emulsion–gel, gel and emulsion) with various ingredients is evaluated. In addition, nanoparticles based on poly- D , L -lactide-co-glycolide (PLGA) as carrier for trans -EHMC are investigated. The influence of nanoparticle matrix on the photochemical stability of the sunscreen agent is also presented. The results obtained demonstrated that PLGA nanoparticles are effective in reducing the light-induced degradation of the sunscreen agent. Moreover, the choice of formulation type and the excipients used play an important role in order to obtain a stable cosmetic product containing trans -EHMC.     

Syntax and consistent equation semantics of hybrid Chi

The hybrid χ (Chi) formalism integrates concepts from dynamics and control theory with concepts from computer science, in particular from process algebra and hybrid automata. It integrates ease of modeling with a straightforward, structured operational semantics. Its ‘consistent equation semantics’ enforces state changes to be consistent with delay predicates, that combine the invariant and flow clauses of hybrid automata. Ease of modeling is ensured by means of the following concepts: (1) different classes of variables: discrete and continuous, of subclass jumping or non-jumping, and algebraic; (2) strong time determinism of alternative composition in combination with delayable guards; (3) integration of urgent and non-urgent actions; (4) differential algebraic equations as a process term as in mathematics; (5) steady-state initialization; and 6) several user-friendly syntactic extensions. Furthermore, the χ formalism incorporates several concepts for complex system specification: (1) process terms for scoping that integrate abstraction, local variables, local channels and local recursion definitions; (2) process definition and instantiation that enable process re-use, encapsulation, hierarchical and/or modular composition of processes; and (3) different interaction mechanisms: handshake synchronization and synchronous communication that allow interaction between processes without sharing variables, and shared variables that enable modular composition of continuous-time or hybrid processes. The syntax and semantics are illustrated using several examples.