Wideband HEMT MMIC low-noise amplifier with temperaturecompensation

A wideband low-noise pseudomorphic HEMT MMIC variable-gain amplifier has been designed and fabricated. The amplifier has a nominal gain of 13 dB across the band 2-20 GHz, with gain flatness better than ±0.4 dB. The noise figure is less than 3 dB across the band 6-16 GHz. An on-chip temperature-sensing diode is used to provide a linear temperature correction which has been used to reduce the gain variation of the amplifier by a factor of 2 across the temperature range -50°C to +95°C     

Intracellular sequestration of sodium by a novel Na+/H+ exchanger in yeast is enhanced by mutations in the plasma membrane H+-ATPase. Insights into mechanisms of sodium tolerance

Sodium tolerance in yeast is disrupted by mutations in calcineurin, a Ca2+/calmodulin-dependent protein phosphatase, which is required for modulation of Na+ uptake and efflux mechanisms. Five Na+-tolerant mutants were isolated by selecting for suppressors of calcineurin mutations, and mapped to the PMA1 gene, encoding the plasma membrane H+-ATPase. One mutant, pma1-alpha4, which has the single amino acid change Glu367 --> Lys at a highly conserved site within the catalytic domain of the ATPase, was analyzed in detail to determine the mechanism of Na+ tolerance. After exposure to Na+ in the culture medium, 22Na influx in the pma1 mutant was reduced 2-fold relative to control, consistent with a similar decrease in ATPase activity. Efflux of 22Na from intact cells was relatively unchanged in the pma1 mutant. However, selective permeabilization of the plasma membrane revealed that mutant cells retained up to 80% of intracellular Na+ within a slowly exchanging pool. We show that NHX1, a novel gene homologous to the mammalian NHE family of Na+/H+ exchangers, is required for Na+ sequestration in yeast and contributes to the Na+-tolerant phenotype of pma1-alpha4.     

Incidence of Lightspeed separation and the potential for bypassing

It is important for endodontic instruments to have a low fracture rate. If a fracture does occur, it would be desirable to have the ability to bypass the broken segment and complete the root canal treatment. One hundred sixty-two root canals in 52 maxillary and mandibular first molars were cleaned and shaped with Lightspeed instruments by three endodontists in their private practices. The canals were instrumented using the technique recommended by the manufacturer. All canals were instrumented to at least a size 45 at the working length. Six instruments separated during treatment. All six had been used more times than recommended by the manufacturer. Five of the six were easily bypassed and treatment completed.     

Inductively coupled plasma etching of InGaP, AllnP, and AlGaP in Cl2 and BCl3 chemistries

Dry etching of InGaP, AlInP, and AlGaP in inductively coupled plasmas (ICP) is reported as a function of plasma chemistry (BCl₃ or Cl₂, with additives of Ar, N₂, or H₂), source power, radio frequency chuck power, and pressure. Smooth anisotropic pattern transfer at peak etch rates of 1000–2000Å·min^?1 is obtained at low DC self-biases (?100V dc) and pressures (2 mTorr). The etch mechanism is characterized by a trade-off between supplying sufficient active chloride species to the surface to produce a strong chemical enhancement of the etch rate, and the efficient removal of the chlorinated etch products before a thick selvedge layer is formed. Cl₂ produces smooth surfaces over a wider range of conditions than does BCl₃.     

Adiabatic couplers: design rules and optimization

Explicit analytic design rules are derived for both 3 dB and full adiabatic couplers. The design rules are in excellent agreement with numerical calculations using the beam propagation method (BPM). It is shown that the length scaling for 3 dB couplers compared to full couplers makes the former more difficult to design. The design for each case is optimized to obtain the upper limit of performance and a comparison is carried out between two different design geometries for both 3 dB and full adiabatic couplers     

Sub-quarter micron silicon integrated circuits and single wafer processing

This paper describes the role of single wafer processing in the development of sub-quarter micron silicon integrated circuits (ICs). The issues related to device processing, choice of materials, performance, reliability, and manufacturing are covered. Single wafer processing based rapid photothermal processing (dominant photons with wavelength less than about 800 nm) is an ideal answer to almost all the thermal processing requirements of current and future Si ICs. For process integration, a new model for process optimization based on minimization of thermal stress is proposed. For breaking the sub-100 nm manufacturing barriers, high throughput lithography based on direct writing is a proposed solution.     

Multi-emitter Si/GexSi1-x heterojunctionbipolar transistor with no base contact and enhanced logic functionality

We demonstrate multi-emitter Si/Ge_xSi_1-x n-p-n heterojunction bipolar transistors (HBT's) which require no base contact for transistor operation. The base current is supplied by the additional emitter contact under reverse bias due to the heavy doping of the emitter-base junction. Large-area HBT test structures exhibit good transistor characteristics, with current gain β≈400 regardless of whether the base current is supplied by a test base electrode or one of the emitter contacts. These devices have enhanced logic functionality because of emitter contact symmetry. Since device fabrication does not require base electrode formation, the number of processing steps can be reduced without significant penalty to HBT performance