Stability of Periodically Unsteady Axisymmetric Jet

To date, the majority of studies on stability of axisymmetric jets have been completed under the assumption of steady mean flow. Yet, many of the natural and man-made flows that are modeled by these jets can have an inherent unsteadiness; the effects of which on the stability and transition have not been determined. Moreover, controlled unsteadiness can be used to control stability and possibly the transition to turbulence. In this note, the effects of periodic variations of the mean flow on the stability of axisymmetric jets are examined. The problem is treated analytically. The results show that the governing equations and dispersion relation for the unsteady jet can be reduced to those governing the steady jet with a time transformation. It is shown that the periodic variations in the mean flow cause amplitude and phase modulations of the unstable modes. The implications of the modulations on the subsequent transition stages are discussed.     

Single stage and double absorption heat transformers used to recover energy in a distillation column of butane and pentane

This paper presents the theoretical analysis of the use of single stage and double absorption heat transformers operating with the water–lithium bromide mixture coupled to a butane and pentane distillation column in a Mexican refinery. A mathematical model of the heat transformers was developed in FORTRAN and integrated as a user model to the Aspen Plus simulation code. Both components coupled to the column were modelled on steady-state conditions. The results show that it is theoretically possible to reduce the energy consumed in the reboiler between 26 and 43% by the use of single stage heat transformer at specific conditions, and between 28 and 33% with double absorption heat transformers for a wide range of operating conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Hazard Classification of Holding Ponds for Liquid Radioactive Wastes

This paper is devoted to the development of a method for hazard classification of holding ponds at the Industrial Association Mayak, the Siberian Intergrated Chemical Plant, and the Integrated Iron-Mining and Mining-Chemical Plant. The method is based on a combined approach employing the qualitative characteristics and quantitative parameters of the ponds. The classification of holding ponds is intended to be used for developing the requirements for the composition and content of the documentation presented by enterprises for licensing the operation and decommissioning of holding ponds.     

Determination of the total concentration and speciation of Al(III) in tea infusions

The aluminium species in different tea infusions were investigated, by determining their stability constants and concentration. This was done for some particular samples using a simple experimental method based on the sorption of aluminium on the strongly sorbing resin Chelex 100, by a batch procedure. From the thermodynamic information obtained it is possible to calculate the concentration of the different species, and in particular that of the free metal ion, which is very important for evaluating the adsorption of aluminium on biological membranes. It was found that aluminium in the tea infusions here considered is present at high total concentration, approximately 0.1 mM, but mainly linked to strong complexes, for instance with side reaction coefficient higher than 10(5.11) at pH 3.95 in one case (tea 1). This could be the reason for the low toxicity of aluminium in tea. These strong complexes were not dissociated even in the presence of Chelex 100. In this case only a limiting value of the reaction coefficient could be evaluated. The presence of the very strong complexes was found in all the tea sample here considered. In two of the considered samples (one black and one green tea) a part of Al(III) was linked to less strong complexes, for example with a reaction coefficient 10(4.14) (tea 2, pH 4.20). The presence in the considered tea infusions of other substances able to complex aluminium was also detected, by the well known ligand titration procedure, at concentration ranging from 0.65 to 3.37 mM in three tea infusions, and at somewhat higher concentration in the case of the ready drink, which was also considered for comparison.     

Dissolved oxygen control of the activated sludge wastewater treatment process using model predictive control

Activated sludge wastewater treatment processes are difficult to be controlled because of their complex and nonlinear behavior, however, the control of the dissolved oxygen level in the reactors plays an important role in the operation of the facility. For this reason a new approach is studied in this paper using simulated case-study approach: model predictive control (MPC) has been applied to control the dissolved oxygen concentration in an aerobic reactor of a wastewater treatment plant. The control strategy is investigated and evaluated on two examples using systematic evaluation criteria: in a simulation benchmark – developed for the evaluation of different control strategies – the oxygen concentration has to be maintained at a given level in an aerobic basin; and a changing oxygen concentration in an alternating activated sludge process is controlled using MPC technique. The effect of some MPC tuning parameters (prediction horizon, input weight, sampling time) are also investigated. The results show that MPC can be effectively used for dissolved oxygen control in wastewater treatment plants.     

Fire performance of wood (Pinus radiata) treated with fire retardants and a wood preservative

In this work, we co‐formulated an oil‐borne copper naphthenate/permethrin wood preservative system with synthetic polymer‐based fire‐retardant additives prior to the impregnation of Pinus radiata sapwood. We evaluated what effect, if any, the preservative had upon the fire performance properties of the fire retardants and whether the fire retardants impacted on the fungicidal and termiticidal efficacy of the preservative. The fire retardants included halogenated and phosphorus‐based systems. A mass loss calorimeter, in conjunction with a thermopile, was used to measure the time to ignition and the peak heat release rate (PHRR) from which the fire performance index (FPI) was determined. The preservative properties were evaluated using termite and soil‐block decay bioassays. In summary, we found that the rate of fire growth was reduced when the fire retardants were used in combination with the wood preservative. We also found that the PHRR was a better determinant of fire performance than the FPI. The performance of the wood preservative was enhanced against fungal decay and termite attack when used in combination with the fire retardants. The fire retardants also demonstrated some wood preservative properties of their own. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of the content of wax esters in some sea foods and their molecular composition. A comparison with ω-3 enriched wax esters

Wax esters enriched in ω-3 fatty acids have been recently shown to be readily absorbed by rats after dietary supplementation. Wax esters are less prone to oxidation and can be better formulated than liquid ω-3 derivatives. All these characteristics suggest a possible use of wax esters enriched in ω-3 as food supplements. However, some naturally occurring wax esters are defined as scarcely digestible (jojoba oil, spermaceti). On the other hand, wax esters have been found in several sources of marine origin, which can enter normal foodstuff. In order to better understand the digestibility of wax esters, we have analysed some foods from marine sources. The content of triglycerides and wax esters of the foods has been determined. Moreover, wax esters have been analysed for their composition in alcohols and fatty acids. Wax esters have been shown to be a part of the neutral lipid extract of the foods analysed. Their content, if compared with the content in triglycerides, shows striking differences. In the case of two botargo preparations, it has been shown that wax esters are more than 90% of the total neutral lipid extract. The content of fatty acids and alcohols found in the foods analysed is consistent with published data.     

Focal adhesion interactions with topographical structures: a novel method for immuno-SEM labelling of focal adhesions in S-phase cells

Current understanding of the mechanisms involved in osseointegration following implantation of a biomaterial has led to adhesion quantification being implemented as an assay of cytocompatibility. Such measurement can be hindered by intra-sample variation owing to morphological changes associated with the cell cycle. Here we report on a new scanning electron microscopical method for the simultaneous immunogold labelling of cellular focal adhesions and S-phase nuclei identified by BrdU incorporation. Prior to labelling, cellular membranes are removed by tritonization and antigens of non-interest blocked by serum incubation. Adhesion plaque–associated vinculin and S-phase nuclei were both separately labelled with a 1.4 nm gold colloid and visualized by subsequent colloid enhancement via silver deposition. This study is specifically concerned with the effects microgroove topographies have on adhesion formation in S-phase osteoblasts. By combining backscattered electron (BSE) imaging with secondary electron (SE) imaging it was possible to visualize S-phase nuclei and the immunogold-labelled adhesion sites in one energy 'plane' and the underlying nanotopography in another. Osteoblast adhesion to these nanotopographies was ascertained by quantification of adhesion complex formation.     

Construction of a prediction model for the structural stability of a surface grinder using backpropagation neural network

Learning and prediction capability of the backpropagation neural network (BPNN) have been used to build the prediction model for the structural stability of a surface grinder. The Lagrange energy method is applied to derive the dynamic equation of the lumped parameter model of the surface grinder. The major factors influencing the structural stability of the system can be determined after the ratio of kinetic energy of the sub-structure and the ratio of potential energy of the sub-structure interface are obtained. An orthogonal rotatable central composite design is adopted to dispose the treatment combinations of the major factors. The BPNN model is constructed by the treatment combinations of the training patterns and verified by the treatment combinations of the test patterns. In this paper, a 3-layer BPNN model with a 10-neuron hidden layer which converged after 4,072 learning cycles is selected to predict the structural stability of a surface grinder within the planned ranges. The percentage residuals of both training patterns and test patterns are all within 3.41%, thus the prediction accuracy of the BPNN model is excellent so that the engineering demands are well satisfied.     

Hochbelastbare kohlenstoffbasierte Mehrschichtsysteme für die Umformtechnik

Carbon based multilayer systems for highly loaded forming tools Amorphous hydrogenated carbon (metal‐free a‐C:H and metal‐containing a‐C:H:Me) films respond very sensitively to local overloads. For example during forming tool operations, hard abrasive particles and locally high stresses on the coating surface can cause crack initiation and early coating failure. Compared to the high hardness, wear resistance and excellent friction properties, in many cases the adhesion of a‐C:H films is relatively insufficient. Adhesion and overload resistance of a‐C:H and a‐C:H:Me, prepared by reactive sputtering, can be influenced in a wide range by different interlayer systems. In the present report the wear mechanism of amorphous carbon coatings and the influence of different metallic, metal nitride and metal carbide interlayers on the growth structure, the adhesion and the load resistance will be reported. Two well adapted multi‐coating systems, successfully tested for highly loaded tools and components, will be presented.