Calculation of imaging errors of AWG

This paper reports on the modeling of arrayed-waveguide gratings (AWGs) by means of Fourier optics where the coupling between the grating waveguides and defocus of the star couplers is taken into account as well. Special interest is drawn to the geometrical modeling of AWGs. The paraxial approximation for the free-space propagation within the star couplers, the exact calculation of the coupling coefficients for the star couplers by an orthonormal basis (ONB) expansion, and the drawbacks due to the nonunitary transfer matrix provided by the Green's functions approach for the coupling between the grating waveguides, as well as possible improvements thereof, are identified as crucial points. An efficient orthonormalization procedure by means of an eigenvector decomposition is presented. A unitary approximation of the transfer matrix, which is in itself approximate but in general not unitary, introduced within the impulse response method, is obtained. The presented simulation technique allows for ab initio simulations, which do not fall back on any experimental input, for the spectral response of AWGs, which are found in good agreement with experimental results.     

Sensor technologies for monitoring metabolic activity in single cells-part I: optical methods

A review of optical, chemical, and biological sensors to detect metabolic activity at the single-cell level is presented in the context of the development of lab-on-a-chip research instrumentation. The sensors reviewed include optical sensors, at both research and commercial levels, that can optically detect intracellular metabolites including adenosine triphosphate, nicotinamide-adenine dinucleotide, reduced flavin adenine dinucleotide, and other metabolites, including oxygen, carbon dioxide, and glucose. Methods to optically detect pH changes which are a general indicator of activity in extracellular space are also briefly reviewed. Performance metrics such as sensitivity, sensor size, drift, time response, and sensing range are included when available. Highly suitable optical sensor technologies for monitoring cellular metabolic activity include luminescent (fluorescent, phosphorescent, and chemiluminescent) and colorimetric optical probes. Different approaches to extracting luminescent and colorimetric information are reviewed, including benchtop techniques, fiber-optic approaches, and the use of probes encapsulated by biologically localized embedding. A brief discussion of alternate optical sensor technologies, such as surface plasmon resonance and infrared absorption spectroscopy, is also presented.     

The Gilbert-Holland FDTD thin slot model revisited: an alternative expression for the in-cell capacitance

This paper proposes an alternative expression for the in-cell capacitance of a photoelectrical cell (PEC)-mounted slot, which is the conceptual cornerstone of the Gilbert-Holland subcell finite difference time domain (FDTD) model. By treating a slightly modified electrostatic problem, the extraneous charge singularity on the PEC edges touching the cell, which is characteristic of the originally proposed model, is removed. The latter offers better physical grounds for a new expression of the capacitance and the effective permittivity used in the update equations. High resolution standard FDTD simulation results are presented in support of the new expression.     

A fast algorithm and practical considerations for passive macromodeling of measured/simulated data

Passive macromodeling of high-speed package and interconnect modules characterized by measured/simulated data has generated immense interest during the recent years. This paper presents an efficient algorithm for transient simulation of interconnect networks characterized by measured/simulated data in the presence of other linear and nonlinear devices. A new set of linear constraints are proposed, which help in preserving the passivity of resulting macromodels. Examples are presented to demonstrate the validity and efficiency of the proposed algorithm.     

A biomorphic digital image sensor

An arbitrated address-event imager has been designed and fabricated in a 0.6-/spl mu/m CMOS process. The imager is composed of 80 /spl times/ 60 pixels of 32 /spl times/ 30 /spl mu/m. The value of the light intensity collected by each photosensitive element is inversely proportional to the pixel's interspike time interval. The readout of each spike is initiated by the individual pixel; therefore, the available output bandwidth is allocated according to pixel output demand. This encoding of light intensities favors brighter pixels, equalizes the number of integrated photons across light intensity, and minimizes power consumption. Tests conducted on the imager showed a large output dynamic range of 180 dB (under bright local illumination) for an individual pixel. The array, on the other hand, produced a dynamic range of 120 dB (under uniform bright illumination and when no lower bound was placed on the update rate per pixel). The dynamic range is 48.9 dB value at 30-pixel updates/s. Power consumption is 3.4 mW in uniform indoor light and a mean event rate of 200 kHz, which updates each pixel 41.6 times per second. The imager is capable of updating each pixel 8.3K times per second (under bright local illumination).     

A statistical model for estimating the trend of electrical quantities in power systems

A statistical approach to estimate the trend, over a long time interval, of electrical parameters is proposed in this paper. The trend is determined by processing a limited number of parameter values measured at instants randomly chosen. Experimental results are reported, which show the good performance of the method proposed when it is applied to estimate customers' loads profiles and the trend of some parameters providing information on power quality.     

The stress-whitened damage zone of PVC blends

The stress-whitened damage zone that formed ahead of a semicircular notch during slow tensile loading has been measured from optical micrographs of translucent blends of poly(vinyl chloride) (PVC) with experimental chlorinated polyethylene (CPE) resins. When the zone was small, the plane strain condition applied and from the elastic stress distribution a constant mean stress condition was found at the boundary of the crescent-shaped zone. The critical mean stress did not depend on the chlorine content or the chlorine distribution of the experimental CPE resin used in the blend. While the critical mean stress decreased as the amount of CPE in the blend was increased, the critical volume strain, calculated from the bulk modulus, was independent of composition and was thought to be the controlling parameter for stress-whitening. When the zone was larger, the shape was qualitatively described by concepts of stress redistribution in the presence of a plastic zone ahead of the notch. Macroscopic flow and necking were only detected near the maximum in the stress-displacement curve.     

Corrosion behaviour of copper-reinforced carbon electrodes in dilute hydrochloric acid solutions

The corrosion behaviour of experimentally prepared copper-reinforced carbon electrodes in dilute hydrochloric acid is investigated. The electrodes are not only directly attacked by the acid, but they are also subjected to galvanic corrosion. The baking temperature and time are the most crucial processing variables. A minimum in the corrosion rate is always achieved when the electrodes are baked at 400 °C for 1.5 h, the level depending on the copper content. The corrosion resistance increases progressively with the baking temperature as long as the baking time is less than 1.5 h. Baking for more than 1.5 h results in increasing corrosion rate. The presence of copper increases the corrosion resistance of the prepared electrodes.