Formation of ordered metal nanowire-inorganic salt composites

A new phenomenon accompanying the electrolysis of salts has been observed, whereby an ordered composite is formed under certain conditions (electrolyte composition, current density). The composite comprises an inorganic salt crystal penetrated by metal nano- and microwires. This phenomenon can serve as a basis for the technology of oriented and ordered nanowire array synthesis.     

On the possibility of development of defects in zirconium parts of thermal reactors during storage prior to and after operation

We have established that technological defects (cracks) in zirconium articles can develop in the course of long-term storage prior to their mounting in a reactor, which is caused by the action of residual stresses and hydrogen. We have considered the conditions of after-operation storage of zirconium articles of the fuel core of thermal reactors in water of the cooling ponds of reactors and in spent-fuel storehouses. The possibility of subsequent hydrogenation of these articles during their storage has been shown. Finally, we have studied the effect of hydrogen, absorbed in the course of storage, on the crack resistance of zirconium articles and the development of defects in them due to delayed hydride cracking. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 5, pp. 105–109, September–October, 2007.     

A One-Dimensional Nonlocal Damage-Plasticity Model for Ductile Materials

This paper presents a new 1-D non-local damage-plasticity deformation model for ductile materials. It uses the thermodynamic framework described in Houlsby and Puzrin (2000) and holds, nevertheless, some similarities with Lemaitre’s (1971) approach. A 1D finite element (FE) model of a bar fixed at one end and loaded in tension at the other end is introduced. This simple model demonstrates how the approach can be implemented within the finite element framework, and that it is capable of capturing both the pre-peak hardening and post-peak softening (generally responsible for models instability) due to damage-induced stiffness and strength reduction characteristic of ductile materials. It is also shown that the approach has further advantages of achieving some degree of mesh independence, and of being able to capture deformation size effects. Finally, it is illustrated how the model permits the calculation of essential work of rupture (EWR), i.e. the specific energy per unit cross-sectional area that is needed to cause tensile failure of a specimen.     

Pesticide monitoring programme of the Ministry of Health of Brazil

The structure of the recently introduced Brazilian government programme for monitoring pesticide residues in six major agricultural products is described. Residues found from the analysis of samples of tomatoes and strawberries are discussed in detail. The much greater frequency of detection of pesticide residues, many of which are not approved for use in Brazil, in produce being sold on the domestic market, as opposed to that produced for export, is of major concern. It is perceived that this new monitoring programme will become permanent and be used to underpin enforcement actions that will need to be taken to reduce the numbers of incidents of illegal residues occurring, particularly in fresh fruits and vegetables.     

Studies on structural,dielectric and electrical properties of Dy<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Bi<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> solid solutions

The polycrystalline samples of Dy _x Bi_1−x FeO₃ (x = 1, 0.8, 0.6, 0.4 and 0.2) were synthesized by standard solid state reaction technique. The samples synthesized were characterized by X-ray diffraction (XRD) technique. Further the samples were characterized by infrared (IR) spectroscopic technique. The dielectric measurements were carried out as a function of frequency in the range 100 Hz to 1 MHz at room temperature. Also the dielectric measurements were carried out as a function of temperature at certain fixed frequencies. The ac and dc resistivity measurements were carried out using two probe method. Also temperature dependence of ac and dc resistivity was noted. These measurements suggest polaron conduction in the samples. Finally, the data from XRD, IR, dielectric measurements were correlated.     

The size refinement of Cu crystallites under mechanical processing conditions: a phenomenological modeling approach

A phenomenological model is developed for describing the kinetics of the crystallite size refinement process of Cu powder under mechanical treatment conditions. Based on the evidence that collisions represent the elementary events of energy transfer, the rate of crystallite size decrease is related on a statistical basis to the amount of powder trapped at each collision, to the number of collisions and to the collision energy. The mathematical approach allows for identifying the approximate functional form of the kinetic curves obtained at largely different impact energies. The values of the apparent kinetic constants and of the model parameters involved can be thus estimated by fitting the model curves to the experimental data. The results obtained provide a deeper insight into the details of the crystallite size refinement process.     

The effect of interfacial energy and phase fraction on the particle shape and the dihedral angles in two-phase small particles containing a cusp-oriented interface; computational model

The equilibrium shape and dihedral angles at the solid–liquid–vapor tri-junctions of two-phase alloy small particles containing a cusp-oriented interface were modeled as a function of phase fraction, surface energy and the interfacial energy. The calculation was applied to different combinations of surface and/or interfacial energies to demonstrate the various possible particle shapes and dihedral angles that result for two-phase particles. The dihedral angles at the tri-junction vary with the phase fraction, due to the coupling between the relative amounts of each phase, interfacial energy relative to the two surface energies and the equilibrium conditions at the tri-junction. These features can be used to find the ratio of the interfacial energy to the surface energies of two-phase particles for any state of matter.     

The hydration of slag,part 1: reaction models for alkali-activated slag

Reaction models are proposed to quantify the hydration products and to determine the composition of C–S–H from alkali-activated slags (AAS). Products of the slag hydration are first summarized from observations in literature. The main hydration products include C–S–H, hydrotalcite, hydrogarnet, AFm phases (C₄AH₁₃ and C₂ASH₈) and ettringite. Then, three stoichiometric reaction models are established correlating the mineral composition of slag (the glass part) with the hydration products. Using the proposed models, quantities of hydration products and composition of C–S–H are determined. The models are validated with a number of experimental investigations reported in literature, yielding good agreement, i.e., these models can successfully predict the hydration reaction of AAS. The models are furthermore applied to calculate the retained water in the hydration products of AAS in different hydration states and a general hydration equation of AAS is derived. As an illustration to one of the model applications, chemical shrinkage of the AAS cement paste in different hydration states are predicted. The chemical shrinkage of AAS is shown to be remarkably higher than OPC. Furthermore, phase distribution in the hardened AAS paste and the porosity are calculated.     

Factors affecting prior austenite grain size in low alloy steel

The effect of varying normalising and hardening temperatures on the prior austenite grain size in a low alloy Cr–Mo–Ni–V steel has been examined. An initial relative insensitivity of grain size to increasing austenitising temperature was observed followed by a sudden growth of grains at approximately 1000 °C. A detailed study of the precipitates in the steel showed the presence of a bimodal size distribution of vanadium carbides. The grain size increase is attributed to a decrease in volume fraction and an increase in size of V₄C₃ particles with increasing temperature.     

Identification of microstructural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel

This paper presents the results of a study on the microstructural and microchemical variations in a multipass Gas Tungsten Arc weld (GTAW) of modified 9Cr-1Mo steel. The changes brought about in the steel due to the heating and cooling cycles during welding and the subsequent effects due to reheating effects during multipass welding are described. Detailed analytical transmission electron microscopy has been carried to study the type and composition of the primary and secondary phases in this steel. The systematic changes in microstructural parameters such as Prior Austenite Grain Size, martensite lath size, number density, size and microchemistry of carbides, have been understood based on the different transformations that the steel undergoes during the heating and cooling process. Based on the observed microstructure, an attempt has been made to identify distinct microstructural zones and possible thermal cycles experienced by different regions of the weldment.