Pilocytic astrocytomas of the posterior fossa. A follow-up study in 33 patients

The extent of resection in pilocytic astrocytoma of the posterior fossa often remains undefined and the indications for further treatment in incompletely resected tumours are a matter of debate. It has been also realized that the problem of hydrocephalus in patients with pilocytic astrocytoma of the posterior fossa has not yet been solved and the diagnostic impact of postoperative CT findings remains questionable. We retrospectively reviewed the data from 33 patients harbouring a pilocytic astrocytoma of the posterior fossa to evaluate the impact of surgical technique in terms of radicality and of postoperative imaging results upon prognosis and adjunctive treatment. In addition, the issue of hydrocephalus was considered and related to different treatment modalities. Thirty patients underwent surgical treatment whereas 3 had open biopsy of the tumour. Macroscopically gross total resection of the tumour was performed in 20 patients, whereas resection was partial in 10. Follow-up was obtained in 29 patients for a period which ranged between 2 and 184 months (85 months +/- 56 months). Outcome was good in 24 patients who had only slight neurological deficit and poor in 3 patients, who were severely disabled. Two patients died during the follow-up period. Recurrent tumour growth occurred in 2 cases with incompletely resected tumours. From the series presented, it was concluded that long-term follow-up with CT seems mandatory in cases with contrast-enhancing residual tumour. Recurrent tumour growth should be assumed in postsurgical patients with an enlarging area of enhancement shown in follow-up CT studies. Permanent ventriculoperitoneal shunting is required in certain patients with pre- or postoperative hydrocephalus.(ABSTRACT TRUNCATED AT 250 WORDS)     

Reduction and uptake of methylene blue from rat air spaces

The use of methylene blue (MB) to estimate dilution of epithelial lining fluid, which occurs during bronchoalveolar lavage (BAL), is complicated by loss of this redox dye from the air spaces. The rate of MB uptake from the air spaces of isolated rat lungs and the effects of oxidation and reduction on this process were investigated in this study. Movement of MB from the air spaces to perfusate was compared with the corresponding transport of 125I-labeled albumin, [14C]-dextran, 99mTc-labeled diethylenetriaminepentaacetate, [3H]-sucrose, and 3H2O. By the end of 2 min, MB concentrations in the BAL had fallen by 58 +/- 4% (SE; n = 11) and 3H2O by 78 +/- 2% (n = 13), whereas concentrations of the other indicators decreased by approximately 6%. All but 10% of the 3H2O lost from the air spaces was found in the perfusate, whereas 19% of the lost MB was not recovered in the perfusate, suggesting retention of MB in the pulmonary tissues. Absorption of MB from the air spaces was slowed by 20% when the lungs were left unperfused, and absorption was accelerated threefold by reduction of MB to leukomethylene blue with Na2S2O4. In contrast, MB losses from the air space were slowed by the oxidizing agent K3Fe(CN)6 and by addition of superoxide dismutase or ascorbic oxidase. It is therefore possible that ascorbic acid and O2- entering the air spaces reduce MB to the uncharged leuko form. Lowering the pH of the BAL fluid to 3.5 also slowed MB reabsorption. This suggests that acid aspiration may stimulate release of oxidants into the air spaces.     

Process-based cost modeling of photonics manufacture: the cost competitiveness of monolithic integration of a 1550-nm DFB laser and an electroabsorptive modulator on an InP platform

The monolithic integration of components holds promise to increase network functionality and reduce packaging expense. Integration also drives down yield due to manufacturing complexity and the compounding of failures across devices. Consensus is lacking on the economically preferred extent of integration. Previous studies on the cost feasibility of integration have used high-level estimation methods. This study instead focuses on accurate-to-industry detail, basing a process-based cost model of device manufacture on data collected from 20 firms across the optoelectronics supply chain. The model presented allows for the definition of process organization, including testing, as well as processing conditions, operational characteristics, and level of automation at each step. This study focuses on the cost implications of integration of a 1550-nm DFB laser with an electroabsorptive modulator on an InP platform. Results show the monolithically integrated design to be more cost competitive over discrete component options regardless of production scale. Dominant cost drivers are packaging, testing, and assembly. Leveraging the technical detail underlying model projections, component alignment, bonding, and metal-organic chemical vapor deposition (MOCVD) are identified as processes where technical improvements are most critical to lowering costs. Such results should encourage exploration of the cost advantages of further integration and focus cost-driven technology development.     

Surface leakage currents in SiN/sub x/ passivated AlGaN/GaN HFETs

A novel guarded surface leakage test structure is used to isolate the surface and bulk leakage contributions to gate current in AlGaN/GaN HFETs. Passivation with various recipes of SiN/sub x/ always resulted in the commonly observed increase in gate leakage, which was found to be dominated by bulk leakage through the AlGaN. However, high temperature deposited SiN/sub x/ recipes gave a 1-2 orders reduction in surface leakage, whereas low temperature deposition gave an increase. Gate lag measurements were found to correlate closely with the surface leakage component, giving direct evidence that the key device problem of current slump is associated with current flow at the AlGaN surface.     

Creating advanced functions on network processors: experience and perspectives

In this article we present five case studies of advanced networking functions that detail how a network processor (NP) can provide high performance and also the necessary flexibility compared with ASIC. We first review the basic NP system architectures, and describe the IBM PowerNP architecture from the data plane as well as the control plane point of view. We introduce models for the programmer's views of NP that facilitate a global understanding of NP software programming. Then, for each case study, we present results from prototypes as well as general considerations that apply to a wider range of system architectures. Specifically, we investigate the suitability of NP for QoS (active queue management and traffic engineering), header processing (GPRS tunneling protocol), intelligent forwarding (load balancing without flow disruption), payload processing (code interpretation and just-in-time compilation in active networks), and protocol stack termination (SCTP). Finally, we summarize the key features as revealed by each case study, and conclude with remarks on the future of NP.     

High-performance surface-micromachined inchworm actuator

This work demonstrates a polycrystalline silicon surface-micromachined inchworm actuator that exhibits high-performance characteristics such as large force (/spl plusmn/0.5 millinewtons), large velocity range (0 to /spl plusmn/4.4 mm/sec), large displacement range (/spl plusmn/100 microns), small step size (/spl plusmn/10, /spl plusmn/40 or /spl plusmn/100 nanometers), low power consumption (nanojoules per cycle), continuous bidirectional operation and relatively small area (600 /spl times/ 200/spl mu/m/sup 2/). An in situ load spring calibrated on a logarithmic scale from micronewtons to millinewtons, optical microscopy and Michelson interferometry are used to characterize its performance. The actuator consists of a force-amplifying plate that spans two voltage-controlled clamps, and walking is achieved by appropriately sequencing signals to these three components. In the clamps, normal force is borne by equipotential rubbing counterfaces, enabling friction to be measured against load. Using different monolayer coatings, we show that the static coefficient of friction can be changed from 0.14 to 1.04, and that it is load-independent over a broad range. We further find that the static coefficient of friction does not accurately predict the force generated by the actuator and attribute this to nanometer-scale presliding tangential deflections.