Three‐Dimensional Branched Nanowire Heterostructures as Efficient Light‐Extraction Layer in Light‐Emitting Diodes

A facile method to fabricate three‐dimensional branched ZnO/MgO nanowire heterostructures and their application as the efficient light‐extraction layer in light‐emitting diodes are reported. The branched MgO nanowires are produced on the hydrothermally‐grown ZnO nanowires with a small tapering angle towards the tip (≈6°), by the oblique angle flux incidence of MgO. The structural evolution during the growth verifies the formation of the MgO nanoscale islands with strong (111) preferred orientation on very thin (5–7 nm) MgO (110) layer. The MgO nanobranches, then grown on the islands, are polycrystalline consisting of many grains oriented in specific directions of <200> and <220>, supported by the nucleation theory. The LEDs with the branched ZnO/MgO nanowire arrays show a remarkable enhancement in the light output power by 21% compared with that of LEDs with pristine ZnO nanowires. Theoretical calculations using a finite‐difference time‐domain method reveal that the nanostructure is very effective in breaking the wave‐guiding mode inside the ZnO nanowires, extracting more light especially in radial direction through the MgO nanobranches.     

A Colorimetric Hydrocarbon Sensor Employing a Swelling‐Induced Mechanochromic Polydiacetylene

Exceptional challenges have confronted the rational design of colorimetric sensors for saturated aliphatic hydrocarbons (SAHCs). The main reasons for this difficulty are the extremely nonpolar nature of these targets and their lack of functional groups that can interact with probes. By taking advantage of a mechanochromic conjugated polydiacetylene (PDA) and the hydrocarbon‐induced swelling properties of polydimethylsiloxane (PDMS), a sensor film that enables simple, colorimetric differentiation between a variety of C5 to C14 aliphatic hydrocarbons is fabricated. The unprecedented PDA–PDMS composite sensor undergoes a blue‐to‐red colorimetric transition on a timescale that is dependent on the chain length of the hydrocarbon target. In addition, the development of the red color is directly proportional to the swelling ratio of the film. This straightforward approach enables naked‐eye differentiation between n‐pentane and n‐heptane. The versatility of the sensor system is demonstrated by using it for the colorimetric determination of kerosene in adulterated diesel oil. Finally, the observation that a PDA microcrystal in the film undergoes significant expansion and tearing in concert with a blue‐to‐red colorimetric transition during the swelling process provides direct evidence for the mechanism for the mechanochromic behavior of the PDA.     

Fast Switching ITO Free Electrochromic Devices

Indium‐doped tin oxide free electrochromic devices are prepared by coating electrochromic polymers onto polyethylene terephthalate substrates encompassing two different silver grids as electrodes. One design comprises a flexoprinted highly conductive silver grid electrode, yielding electrochromic devices with a response time of 2 s for an optical contrast of 27%. The other design utilizes an embedded silver grid electrode whereupon response times of 0.5 s for a 30% optical contrast are realized when oxidizing the device. A commercially available conductive poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate acid) formulation (PEDOT:PSS) is coated onto the silver grids as a charge balancing polymer, and is in this setting found to be superior to a polypyrrole previously employed in electrochromic devices. In addition, the PEDOT:PSS layer increases the conductivity in the hexagonal grid structure.     

Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.     

Relaxor/Ferroelectric Composites: A Solution in the Quest for Practically Viable Lead‐Free Incipient Piezoceramics

Recently developed lead‐free incipient piezoceramics are promising candidates for off‐resonance actuator applications with their exceptionally large electromechanical strains. Their commercialization currently faces two major challenges: high electric field required for activating the large strains and large strain hysteresis. It is demonstrated that design of a relaxor/ferroelectric composite provides a highly effective way to resolve both challenges. Experimental results in conjunction with numerical simulations provide key parameters for the development of viable incipient piezoceramics.     

Software-defined optical networks (SDONs): a survey

This paper gives an overview of software-defined optical networks (SDONs). It explains the general concepts on software-defined networks (SDNs), their relationship with network function virtualization, and also about OpenFlow, which is a pioneer protocol for SDNs. It then explains the benefits and challenges of extending SDNs to multilayer optical networks, including flexible grid and elastic optical networks, and how it compares to generalized multi-protocol label switching for implementing a unified control plane. An overview on the industry and research efforts on SDON standardization and implementation is given next, to bring the reader up to speed with the current state of the art in this field. Finally, the paper outlines the benefits achieved by SDONs for network operators, and also some of the important and relevant research problems that need to be addressed.     

A Novel and Efficient Feature Extraction Method for Iris Recognition

With a growing emphasis on human identification, iris recognition has recently received increasing attention. Iris recognition includes eye imaging, iris segmentation, verification, and so on. In this letter, we propose a novel and efficient iris recognition method which employs a cumulative‐sum‐based grey change analysis. Experimental results demonstrate that the proposed method can be used for human identification in efficient manner.     

Asymmetrical vertical phorias indicating dissociated vertical deviation in subjects with normal binocular vision

We measured the symmetry of phoria angles in six normal subjects. Subjects were selected on the basis of good visual acuity and stereopsis, normal binocular eye alignment and, apart from mild refraction errors, absence of ocular abnormalities. They were instructed to look at a word on a reading chart at 2 m distance. Each measurement consisted of five subsequent intervals of 5 s duration. During these five intervals viewing was binocular, with the right eye only, binocular, with the left eye only, and binocular, respectively. Each experiment consisted of twelve measurements. Eye movements were measured with scleral coils suited for measuring in horizontal, vertical and torsional directions. Five out of six subjects displayed an asymmetrical vertical phoria; one subject showed an alternating hyperphoria; four displayed a left over right vertical phoria that was largest for left eye occlusion. Only one subject showed a symmetrical vertical phoria. Both the size of the vertical phorias and the size of the asymmetries in these vertical phorias were very small: on average 0.16 +/- 0.01 and 0.17 +/- 0.01 degree, respectively. The direction of the vertical phoria asymmetries (the largest left over right was found with left eye occlusion) and the fact that asymmetries were found more often in vertical than horizontal and torsional phorias suggest that these asymmetries are related to dissociated vertical deviation. These results suggest that dissociated vertical deviation, often observed in subjects with a disruption of binocular vision early in life, reflects the enhancement of a phenomenon that is present in normal subjects as well.