Formation of cavities in GaAs and InGaAs

The ion implantation of He is examined as a means to form thermally stable cavities in GaAs. Room-temperature implantation of 2–10 × 10¹⁶ He/cm² at 40 or 50 keV forms bubbles, but subsequent annealing at 250°C or above leads to exfoliation of the implanted surface layer. The exfoliation appears related to the agglomeration of bubbles on dislocations at the back of the layer; evidence suggests these may be misfit dislocations formed to relieve compressive stress in the implanted layer. Implantation of He at 150°C produces similar results, whereas the He diffuses out of GaAs without forming cavities during implantation at 300°C. However, implantations of immobile Ar followed by He at 400°C produce extended defects with bubbles in the implanted layer; the He can be degassed by subsequent annealing at 400°C to produce 1.5–3.5 nm cavities that are stable at this temperature. The same treatment applied to an In_0.10Ga_0.90As/GaAs heterostructure produces larger cavities preferentially located on dislocations at the interface, with only slight reduction in strain of the epitaxial layer. The microstructures of both GaAs and the heterostructure clearly demonstrate an attractive interaction between bubbles or cavities and dislocations.     

Relationship between pacemaker fibrillation thresholds and electrode area.

Energy thresholds for electrical pacing of the heart are lower with small electrodes than with large. Because pacing of the heart during the vulnerable period may produce ventricular fibrillation, it is also pertinent to know if fibrillation threshold is affected by the electrode size. Electrodes of different surface area but of the same material were implanted in 40 dogs and the pacing thresholds were recorded. Ventricular fibrillation was electrically induced by discharging a 2-msec d.c. cathodal pulse of progressively increasing energy into the vulnerable period. It was found that small electrodes required more energy to produce ventricular fibrillation than large electrodes, and the ratio of fibrillation to stimulation threshold was higher for the small-surface-area electrode. The difference between the thresholds and ratios obtained with the various electrodes was statistically significant. A similar experiment was performed in animals with chronically implanted electrodes, producing comparable results. The results indicate that, in regard to pacing and fibrillation thresholds, small electrodes are preferable to large.     

One‐Step Synthesis of Superbright Water‐Soluble Silicon Nanoparticles with Photoluminescence Quantum Yield Exceeding 80%

Fluorescent silicon nanoparticles (SiNPs) have shown potential applications in bioimaging/biolabelling, sensing, and nanomedicine/cancer therapy due to their superior properties such as excellent photostability, low cytotoxicity, and versatile surface modification capability. Here, a simple, high‐yield, and one‐pot method is developed to prepare superbright, water‐soluble, and amine‐functionalized SiNPs with photoluminescence quantum yield (PLQY) comparable to fluorescent II–VI semiconductor quantum dots (QDs) but with much lower cytotoxicity. By introducing a commercially available amine‐containing silane molecule, N‐[3‐(trimethoxysilyl)propyl]ethylenediamine (DAMO), water‐soluble SiNPs are prepared with PLQY of 82.4% via a microwave‐assisted method. To the best of our knowledge, this is the highest PLQY value ever reported for water‐soluble fluorescent SiNPs. The silicon element in our SiNPs is mainly four‐valent silicon and thus these SiNPs may also be termed as oxidized silicon nanospheres or silica nanodots. We have also demonstrated the importance of the silane structure (e.g., a suitable amine content) on the photoluminescence property of the prepared SiNPs. As revealed by the time‐resolved photoluminescence technique, the highest PLQY value of DAMO SiNPs is correlated with their monoexponential decay with a relatively long fluorescence lifetime. In addition, the potential use of these SiNPs has also been demonstrated for fluorescent patterning/printing and ion sensing (including Cu²⁺ and Hg²⁺).     

Thermodynamics of high-temperature aluminum,zirconium, and yttrium hydroxide and oxyhydroxide vapor species

Thermodynamic parameters are reported for gaseous hydroxides and oxyhydroxides of Al, Zr, and Y. The structures and vibrational frequencies are calculated using density functional theory with the B3LYP functional. This yields entropies at 298.15 K and heat capacities. The enthalpies are calculated from appropriate reactions and the CCSD(T) (Coupled Cluster, Singles, Doubles, and perturbative Triples) approach. The hydroxide groups are treated as hindered rotors for all species. The results are compared to the limited experimental and theoretical calculations for these species. Finally, the data are put into a database for a free-energy minimizer and the vapor pressures for each species are compared.     

Differential effects of air conditioning type on residential endotoxin levels in a semi‐arid climate

Residential endotoxin exposure is associated with protective and pathogenic health outcomes. Evaporative coolers, an energy‐efficient type of air conditioner used in dry climates, are a potential source of indoor endotoxins; however, this association is largely unstudied. We collected settled dust biannually from four locations in homes with evaporative coolers (n=18) and central air conditioners (n=22) in Utah County, Utah (USA), during winter (Jan‐Apr) and summer (Aug‐Sept), 2014. Dust samples (n=281) were analyzed by the Limulus amebocyte lysate test. Housing factors were measured by survey, and indoor temperature and relative humidity measures were collected during both seasons. Endotoxin concentrations (EU/mg) were significantly higher in homes with evaporative coolers from mattress and bedroom floor samples during both seasons. Endotoxin surface loads (EU/m²) were significantly higher in homes with evaporative coolers from mattress and bedroom floor samples during both seasons and in upholstered furniture during winter. For the nine significant season‐by‐location comparisons, EU/mg and EU/m² were approximately three to six times greater in homes using evaporative coolers. A plausible explanation for these findings is that evaporative coolers serve as a reservoir and distribution system for Gram‐negative bacteria or their cell wall components in homes.     

Yeast/E. coli shuttle vectors with multiple unique restriction sites

Two yeast/E. coli shuttle vectors have been constructed. The two vectors, YEp351 and YEp352, have the following properties: (1) they can replicate autonomously in Saccharomyces cerevisiae and in E. coli; (2) they contain the beta-lactamase gene and confer ampicillin resistance to E. coli; (3) they contain the entire sequence of pUC18; (4) all ten restriction sites of the multiple cloning region of pUC18 including EcoRI, SacI, KpnI, SmaI, BamHI, XbaI, SalI, PstI, SphI and HindIII are unique in YEp352; these sites are also unique in YEp351 except for EcoRI and KpnI, which occur twice; (5) recombinant plasmids with DNA inserts in the multiple cloning region of YEp351 and YEp352 can be recognised by loss of beta-galactosidase function in appropriate E. coli hosts; (6) YEp351 and YEp352 contain the yeast LEU2 and URA3 genes, respectively, allowing for selection of these auxotrophic markers in yeast and E. coli; (7) both plasmids are retained with high frequency in yeast grown under non-selective conditions indicative of high plasmid copy number. The above properties make the shuttle vectors suitable for construction of yeast genomic libraries and for cloning of DNA fragments defined by a large number of different restriction sites. The two vectors have been further modified by deletion of the sequences necessary for autonomous replication in yeast. The derivative plasmids YIp351 and YIp352 can therefore be used to integrate specific sequences into yeast chromosomal DNA.     

Evaluation of two commercial lateral-flow test kits for detection of animal proteins in animal feed

Performance characteristics were evaluated for two lateral-flow test kits, Reveal for Ruminant in Feed (Neogen Corporation) and FeedChek (Strategic Diagnostics Inc.), designed to detect ruminant or terrestrial animal proteins in feeds. The stringent acceptance criteria used were developed by the Center for Veterinary Medicine Office of Research to identify test kits with comparable selectivity and sensitivity to microscopy and PCR assay, the analytical methods used by the U.S. Food and Drug Administration (FDA). Guidelines were developed for evaluating the selectivity, sensitivity, ruggedness, and specificity of these kits. These guidelines further stated that ruggedness and specificity testing would be performed only after a test passed both the selectivity and sensitivity assessments. Acceptance criteria for determining success were developed using a statistical approach requiring 90% probability of achieving the correct response, within a 95% confidence interval. A minimum detection level of 0.1% bovine meat and bone meal, consistent with the sensitivity of the methods used by the FDA, was required. Selectivity was assessed by testing 60 dairy feed samples that contained no added animal proteins; sensitivity was determined by evaluating 60 samples (per level of fortification) of the same feed that contained 0.025, 0.05, 0.1, 0.25, 0.5, 1, or 2% bovine meat and bone meal. The Reveal test passed the selectivity assessment but failed the sensitivity assessment, detecting only samples fortified at the 2% level and then only 17 to 33% of those samples, when read according to the label directions. The FeedChek test passed the sensitivity assessment but failed the selectivity assessment, with rates for false-positive results ranging from 34 to 38%, depending on the user. The sensitivity of the Reveal test was affected by the concentration of trace minerals present in the feed; concentrations toward the high end of the normal range prevented the detection of true positive feed samples containing bovine meat and bone meal. Better sensitivity assessments were obtained when lamb meal was used either alone or in combination with bovine meat and bone meal. The FeedChek test was not affected by the concentration of trace minerals or by the type of animal meal used. These results indicate that neither of the two tests is adequate for routine regulatory use.