Profile dependence and measurement of absolute Raman scattering cross-section in optical fibres

A simple measurement method for the absolute Raman scattering cross-section of an optical fibre is presented. This method does not require a high power pump laser and it measures the fibre directly. It is also shown that the calculation of the cross-section depends on the fibre structure, such as its refractive index profile and the differential attenuation between the pump wavelength and Raman wavelength.<>     

Kinetic Study on Absorption of SO2 and NOX with Acidic NaClO2 Solutions Using the Spraying Column

The operating conditions of this study are close to the typical operating conditions of flue gas desulfurization system in coal-fired power plants. The aim of this study is to investigate the absorption kinetics of SO2 and NO from simulated flue gas into an aqueous solution of acidic sodium chlorite using a bench-scale spraying column. The range of absorption rates measured in this study is between 1.91×10?11 and 9.59×10?10?mol?s?1?cm?2. The range of rate constants measured in this study is between 1.32×107 and 1.21×108?(L?mol?1)1.9?s?1, and the average rate constant is 6.16×107?(L?mol?1)1.9?s?1. The activation energy and frequency factor are 129 Kcal/mol (53.97 KJ/mol) and 6.93×1016?[(L/mol)1.9/s], respectively.     

Photoreactivation of Escherichia coli following medium-pressure ultraviolet disinfection and its control using chloramination.

Ultraviolet (UV) disinfection is becoming increasingly popular as an alternative disinfection technology to chlorination in recent years. In this study, we investigated the photoreactivation of Escherichia coli following medium-pressure (MP) UV disinfection of synthetic water by a bench-scale collimated beam apparatus. The UV doses ranged from 1.6 -19.7 mWs/cm2 and photoreactivation was investigated for 6 hours under fluorescent light. In addition, chloramination was applied after UV disinfection to investigate its ability to control photoreactivation. It was found that photoreactivation occurred for all UV doses tested and the increase in bacteria numbers ranged from 0.04 to 1.35 log10. However, the degree of photoreactivation decreased with increased UV doses. Chloramination experiments revealed that the addition of 0.5 mg/l of monochloramine resulted in suppression of photoreactivation for 1 hour only. An increased monochloramine dose of 1 mg/l was found to prevent photoreactivation for the entire duration of the experiment. The results of this study have shown that photoreactivation occurs even after MP UV disinfection, although it is of a lesser extent at higher UV doses. This study has also established that secondary chloramination can effectively suppress and eliminate photoreactivation with a chloramine dose of 1 mg/l.     

Self-Consistent Effects on the Starting Current of Gyrotron Oscillators

Self-consistent effects on the starting current of gyrotron oscillators are examined. Field profiles in the open cavity are shown to be sensitive to the interaction dynamics. This can either significantly raise or lower the oscillation threshold, particularly for the low-Q modes. The transition from resonant-mode oscillations at the low magnetic field to backward-wave oscillations at the high magnetic field is demonstrated.     

Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

Effect of precyclic loading on stress-corrosion-cracking initiation in an X-65 pipeline steel exposed to near-neutral pH soil environment

A study was carried out to understand the effect of precyclic loading on stress-corrosion-crack initiation in an X-65 pipeline steel exposed to a near-neutral-pH soil environment. The test specimens were precyclically loaded before corrosion exposure to represent a service history of up to about 20 years, depending on the severity of pressure fluctuation. Microcracks had initiated on the polished surface of the X-65 pipeline steel after long-time exposure at open-circuit potential (OCP) in a near-neutral-pH synthetic soil solution. These microcracks were mostly initiated from pits at metallurgical discontinuities such as grain boundaries, pearlitic colonies, and banded phases in the steel. Strong preferential dissolution was observed along planes of the banded structures in the steel. The selective corrosion attack at these metallurgical discontinuities is attributed to the galvanic nature of those areas to their neighbors. Cyclic loading prior to corrosion exposure had significant effects on microcrack initiation and propagation during subsequent corrosion exposure. Cyclic loading prior to corrosion exposure either reduced or increased the probability of crack initiation and the rate of crack propagation, depending upon the magnitude of the stress cycles. The largest reduction was seen at a peak cyclic stress of about 0.8 of the yield strength. This cyclic-loading-dependent cracking behavior might be related to the alteration of the substructures and the residual stress in the steel as a result of precyclic loading.     

A multilevel soliton communication system

A multilevel soliton communication system is proposed and assessed. In this system, at the transmitter end each channel transmits its data via fundamental solitons with a pre-specified amplitude (i.e., soliton width). At the receiver end we take advantage of the sensitive relationship between the amount or fundamental soliton self-wavelength shift and the width of the soliton in the subpicosecond region. We first compress the incoming soliton noises to the subpicosecond level and pass them through a short length of fiber at the end of which the pulses have become separated in the wavelength domain since each soliton, corresponding to a data channel, has experienced a different Raman self-wavelength shift. The channels are then easily separated by optical filters. We have derived the design constraint relations for such a system. We have then heuristically designed a 40 Gbs (four channels) system for a 1000 km propagation distance (total data-rate distance product of 40 Tb/km). Numerical simulations and noise analyses have verified the feasibility and practicality of the proposed system with very good design margins. The wavelength jitter is found to be much smaller than the desired filter spacing, and thus its contribution to the bit error rate is negligible. We also argue that the system is more tolerant to Gordon-Haus timing jitter than conventional TDM soliton systems. The system is all fiber and is, therefore very cost effective as it does not require sophisticated electro-optic and microwave circuits for demultiplexing. The system can potentially operate at much higher speeds than those achievable in conventional soliton systems and it can be used in parallel with WDM soliton system     

A monitoring, feedback, and triggering system for reproducible breath-hold MR imaging

OBJECTIVE: To evaluate the diagnostic accuracy and clinical usefulness of high-resolution transvaginal duplex Doppler ultrasound in postpartum and post-abortion patients with excessive hemorrhage who are suspected of having residual trophoblast. METHODS: Forty-eight women with excessive hemorrhage referred for possible residual trophoblastic tissue were evaluated by transvaginal duplex Doppler ultrasonography. Based on two-dimensional imaging, the patients were divided prospectively into groups: women who had an empty uterus with a normal uterine cavity, those with a pure endometrial fluid collection and no echogenic foci, those who had a mixed endometrial fluid collection with foci of echogenicity, and those with intracavitary heterogeneous material with mixed echo patterns of fluid and solid components. In each group, Doppler studies were performed and the resistance index (RI) was calculated. The two-dimensional patterns and Doppler results were correlated with clinical and pathologic follow-up. RESULTS: Twenty-eight subjects had a normal uterine cavity and seven had a pure endometrial fluid collection; all were treated conservatively and none showed later clinical evidence of residual trophoblastic tissue. In 13 women, residual trophoblast was strongly suggested from the images of two-dimensional ultrasonography: Five showed an endometrial fluid collection with some echogenic foci, and eight exhibited intracavitary mixed echogenic material. All underwent curettage, and residual trophoblastic tissue was found in ten of the 13. The mean (+/- standard deviation) RI to flow in the myometrial arteries was 0.54 +/- 0.15 in women without residual trophoblast and 0.35 +/- 0.1 in those with residual trophoblastic tissue (P < .01). CONCLUSION: Our experience suggests that transvaginal duplex Doppler ultrasonography is an effective noninvasive method for evaluating patients with excessive postpartum and post-abortion hemorrhage who are suspected of having residual trophoblastic tissue. Its use enhances the positive preoperative diagnosis of residual trophoblastic tissue and may reduce unnecessary curettage procedures.     

Compulsory notification of cysticercosis in Ribeir?o Preto-SP, Brazil

Cysticercosis is a severe public health problem in several regions of Asia, Africa and Latin America. Epidemiologic studies based on the frequency of cases observed in specialized neurology, neurosurgery and computed tomography services, at autopsy and in seroepidemiologic studies do not permit the determination of the true prevalence of the disease in the population. The objective of the present study was to investigate the prevalence of cysticercosis by compulsory notification. The coefficient of prevalence was 54 cases/100,000 inhabitants in the municipality of Ribeir?o Preto. The results also indicated that cysticercosis is not under control in our region since 21% of cases presented the active form of the disease. Compulsory notification proved to be a valuable resource for the epidemiologic study of cysticercosis, also permitting the mapping of more affected areas for a better direction of prevention strategies.