The relationship of homophobia to intimacy in heterosexual men

Interpersonal intimacy is more difficult to achieve for American men than women. Research has shown that men disclose less, have fewer close friendships, and are viewed by their wives as low in intimacy. Among the barriers to intimacy among men, Tognoli (1980) suggested that homophobia is the most powerful. The present study tested this idea by asking men to disclose a personal secret to either a male confidant, a female confidante, or by writing the secret. It was expected that the presence of a male confidant would stimulate homophobic feelings and inhibit disclosure, while the other two conditions would result in more personal disclosure. A correlation between intimacy of disclosure and level of homophobia was also expected. Subjects were 75 heterosexual men, 31 to 50 years of age, randomly assigned to one of the three conditions. They also completed the Miller Social Intimacy Scale, the Jourard Self-Disclosure Questionnaire, the Index of Homophobia, and the Marlowe-Crowne Social Desirability Scale. Results showed that homophobia was inversely related to level of social intimacy. There was some indication that homophobia does relate to less intimate disclosure to other males. Thus this study found some support for the idea that homophobia is an obstacle to intimacy for men.     

Intrathyroidal parathyroid glands can be a cause of failed cervical exploration for hyperparathyroidism

BACKGROUND: The incidence of intrathyroidal parathyroid glands remains controversial. The purpose of this study was to determine the incidence in a series of patients with hyperparathyroidism. METHODS: Three hundred nine patients underwent parathyroidectomy. Patients were divided into two groups: uniglandular disease versus hyperplasia. RESULTS: Eighteen of 309 patients (6%) had abnormal intrathyroidal parathyroid glands. The incidence was 3% (7 of 222) in patients with uniglandular disease versus 15% (11 of 73) in those with hyperplasia. With a mean follow-up of 54 months, 12 patients are eucalcemic, 5 have persistent hypocalcemia, and 1 has recurrent hypercalcemia. There were no recurrent laryngeal nerve injuries. CONCLUSIONS: These data suggest that an intrathyroidal adenoma is an uncommon cause of failure, whereas abnormal intrathyroidal parathyroid tissue may be a more common cause of failure in patients with hyperplasia.     

Free amino acid supplementation to steers: effects on ruminal fermentation and performance

Three studies were conducted to evaluate amino acid utilization by cattle. In Exp. 1, five steers (580 kg) were fed 86% rolled corn diets with mixtures of amino acids containing up to 6 g/d DL-Met, 24 g/d L-Lys, 6 g/d L-Thr, and 3 g/d L-Trp. Treatments had little effect on ruminal fermentation, diet digestibility, N flow to the duodenum, or microbial efficiency. Ruminal concentrations of Met and Lys increased linearly (P < .05) with amino acid supplementation, whereas Thr responded quadratically, and Trp was not altered. In Exp. 2, four steers (414 kg) were used to measure effects of dietary monensin or laidlomycin propionate in high-grain diets supplemented with amino acids. Ionophores had no significant effect on ruminal fermentation or outflows of amino acids from the rumen. In Exp. 3, 100 steers (287 kg initial BW) were fed diets containing 1% of a nonprotein N source. Treatments were 1) no supplemental N (UREA), 2) UREA plus soybean meal (SBM), 3) UREA plus 2 g/d DL-Met, 8 g/d L-Lys, 2 g/d L-Thr, and 1 g/d L-Trp, or 4) UREA plus 4 g/d DL-Met, 16 g/d L-Lys, 4 g/d L-Thr, and 2 g/d L-Trp. During the growing period (diets based on whole-plant milo silage), gains were higher for SBM-supplemented steers than for UREA steers and intermediate for steers supplemented with amino acids. Few significant differences in performance were observed among treatments during the finishing phase (diets based on dry-rolled corn) or for the entire experiment, but cattle fed SBM or amino acids tended to be fatter and have better marbling scores and quality grades. Amino acids did not greatly alter ruminal fermentation or cattle performance.     

Effect of solid-state fermentation on select antinutrients and protein digestibility of cold-pressed and hexane-extracted canola meals

In this study, the effects of solid-state fermentation (SSF), including strain (Aspergillus niger NRRL 334 and A. oryzae NRRL 5590) and fermentation time (24, 48, and 72 h) on the nutritional value of cold-pressed (CP) and hexane-extracted (HE) canola meals were examined. SSF increased the protein content of both types of meals (from ~36% to ~40%) while reducing the oil content of CP meals (from ~12% to 9%). There was a significant reduction (~80%) in the phytic acid content of both types of meals after fermentation using either fungi. Overall, fermented samples showed a decrease in the total phenolic content from 2.7–3.1 to ~1.0 mg gallic acid equivalents (GAE)/g dry meal (DM) (a ~65% reduction), of which specifically the HE meal fermented with A. niger sample had the greatest decrease from 3.1 to 0.6 mg GAE/g DM (~81% reduction). Seventy-two hours of fermentation decreased the in vitro protein digestibility (IVPD) of A. oryzae fermented meals. In contrast, a shorter fermentation time (24 h) increased the IVPD for most samples as compared to the controls (from ~72%–73% to 77%–81%), with the exception of the CP meal fermented with A. niger which had similar IVPD at all fermentation times. Overall, the changes indicate that SSF using A. niger or A. oryzae can be useful to positively modify the composition of different canola meals and improve their nutritional value by significantly increasing the protein content, decreasing the levels of antinutrients, while only slightly reducing IVPD.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Unusual PD pulse phase distributions in operating rotating machines

The position of partial discharges (PD) with respect to power frequency phase position has long been known to provide useful information on the nature of deterioration of electrical insulation. In the past, virtually all such data has been from PD tests performed in the laboratory on static models or equipment. Improvements in the past 15 years in noise elimination technology have made it possible to monitor the PD activity (number, magnitude and phase position) in the HV stator windings of operating motors and generators. Over a two year period, the PD activity was recorded on more than 100 motors, hydrogenerators and turbine generators, and the pulses analyzed with respect to the ac phase position, with a resolution of 3.6°. In the majority of stator windings, the PD pulses occurred in the expected portion of the ac phase, i.e. Between 0 and 90° as well as between 180 and 270°. However a significant number of instances were recorded where the pulses appeared to be shifted ~30°. This is probably due to the phase-to-phase electric stress which occurs in the endwinding portion of a three phase stator winding. In many other machines, the PO phase positions were very different from the expected patterns determined from static tests. In some of these cases, such results were obtained on machines with suspected loose stator windings. It seems reasonable to conclude that the unusual PD patterns may be due to the influence of moving stator coils on the PD patterns. Such an influence is not easy to simulate in static laboratory tests. PD pulse phase analysis is shown to be a useful means of helping to determine the main deterioration mechanisms of stator insulation systems of operating motors and generators     

Comment and discussion on digital processing of PD pulses

Some of the more salient aspects of the digital processing technology of PD signals are examined. Most of the efforts in this field are concentrated on the application of digital analyzers for pulse height analysis, pattern recognition and identification of the physical phenomena. It is demonstrated that errors in the signal processing unit can lead to dominant mistakes in the interpretation of the test results     

A Simple Bioconjugate Attachment Protocol for Use in Single Molecule Force Spectroscopy Experiments Based on Mixed Self-Assembled Monolayers

Single molecule force spectroscopy is a technique that can be used to probe the interaction force between individual biomolecular species. We focus our attention on the tip and sample coupling chemistry, which is crucial to these experiments. We utilised a novel approach of mixed self-assembled monolayers of alkanethiols in conjunction with a heterobifunctional crosslinker. The effectiveness of the protocol is demonstrated by probing the biotin-avidin interaction. We measured unbinding forces comparable to previously reported values measured at similar loading rates. Specificity tests also demonstrated a significant decrease in recognition after blocking with free avidin.     

Titanium Sheet Fabricated from Powder for Industrial Applications

In collaboration with Ametek and Commonwealth Scientific and Industrial Research Organization (CSIRO), Oak Ridge National Laboratory has evaluated three different methods for converting titanium hydride?Cdehydride (HDH) powder into a thin-gauge titanium sheet from a roll-compacted preform. Methodologies include sintering, followed by cold rolling and annealing; direct hot rolling of the roll-compacted sheet; and hot rolling of multiple layers of roll-compacted sheet that are encapsulated in a steel can. Fabrication of fully consolidated sheet has been demonstrated using all three methods, and each processing route has the ability to produce a sheet that meets ASTM B265 specifications. However, not every method currently provides a sheet that can be highly formed without tearing. The degree of sintering between powder particles, postprocessing density, and the particle-to-particle boundary layer where compositional variations may exist have a significant effect on the ability to form the sheet into useful components. Uniaxial tensile test results, compositional analysis, bend testing, and biaxial testing of the titanium sheet produced from hydride?Cdehydride powder will be discussed. Multiple methods of fabrication and the resulting properties can then be assessed to determine the most effective and economical means of making components for industrial applications.