Effect of thermal treatment on the growth,structure and luminescence of nitride-passivated silicon nanoclusters

Silicon nanoclusters (Si-ncs) embedded in silicon nitride films have been studied to determine the effects that deposition and processing parameters have on their growth, luminescent properties, and electronic structure. Luminescence was observed from Si-ncs formed in silicon-rich silicon nitride films with a broad range of compositions and grown using three different types of chemical vapour deposition systems. Photoluminescence (PL) experiments revealed broad, tunable emissions with peaks ranging from the near-infrared across the full visible spectrum. The emission energy was highly dependent on the film composition and changed only slightly with annealing temperature and time, which primarily affected the emission intensity. The PL spectra from films annealed for duration of times ranging from 2 s to 2 h at 600 and 800°C indicated a fast initial formation and growth of nanoclusters in the first few seconds of annealing followed by a slow, but steady growth as annealing time was further increased. X-ray absorption near edge structure at the Si K- and L_3,2-edges exhibited composition-dependent phase separation and structural re-ordering of the Si-ncs and silicon nitride host matrix under different post-deposition annealing conditions and generally supported the trends observed in the PL spectra.     

Hydrogen Production by the Thermophilic Bacterium Thermotoga neapolitana

As the only fuel that is not chemically bound to carbon, hydrogen has gained interest as an energy carrier to face the current environmental issues of greenhouse gas emissions and to substitute the depleting non-renewable reserves. In the last years, there has been a significant increase in the number of publications about the bacterium Thermotoga neapolitana that is responsible for production yields of H₂ that are among the highest achievements reported in the literature. Here we present an extensive overview of the most recent studies on this hyperthermophilic bacterium together with a critical discussion of the potential of fermentative production by this bacterium. The review article is organized into sections focused on biochemical, microbiological and technical issues, including the effect of substrate, reactor type, gas sparging, temperature, pH, hydraulic retention time and organic loading parameters on rate and yield of gas production.     

Homology modelling of two subtilisin-like proteases from the hyperthermophilic archaea Pyrococcus furiosus and Thermococcus stetteri

The hyperthermophilic archaeon Pyrococcus furiosus produces an extracellular, glycosylated hyperthermostable subtilisin-like serine protease, termed pyrolysin (Voorhorst,W.G.B., Eggen,R.I.L., Geerling,A.C.M., Platteeuw,C., Siezen,R.J. and de Vos,W.M. (1996) J. Biol. Chem., 271, 20426-20431). Based on the pyrolysin coding sequence, a pyrolysin-like gene fragment was cloned and characterized from the extreme thermophilic archaeon Thermococcus stetteri. Like pyrolysin, the deduced sequence of this serine protease, designated stetterlysin, contains a catalytic domain with high homology with other subtilases, allowing homology modelling starting from known crystal structures. Comparison of the predicted three-dimensional models of the catalytic domain of stetterlysin and pyrolysin with the crystal structure of subtilases from mesophilic and thermophilic origin, i.e. subtilisin BPN' and thermitase, and the homology model of subtilisin S41 from psychrophilic origin, led to the identification of features that could be related to protein stabilization. Higher thermostability was found to be correlated with an increased number of residues involved in pairs and networks of charge-charge and aromatic-aromatic interactions. These highly thermostable proteases have several extra surface loops and inserts with a relatively high frequency of aromatic residues and Asn residues. The latter are often present in putative N-glycosylation sites. Results from modelling of known substrates in the substrate- binding region support the broad substrate range and the autocatalytic activation previously suggested for pyrolysin.      

The role of tryptophan in protein fibrillogenesis: relevance of Trp7 and Trp14 to the amyloidogenic properties of myoglobin

In order to understand the role of tryptophan in the mechanisms of fibrils formation, the ability of a series of analogs of the residue 7-18 span of myoglobin to form amyloid-like fibrils was investigated. Alternatively one or both tryptophans were substituted with alanine and leucine, to determine the contribution of hydrophobicity and aromaticity. The scale of aggregation propensity of the peptides determined indicates that tryptophan is crucial for the amyloidogenic process. Since the rare tryptophan residue is generally engaged in structural roles in proteins, or when exposed serves as binding sites, we surmise that its exposure in the amyloidogenic fragments allows for intermolecular clustering with residues from other molecules leading to the formation of amyloid aggregates.     

Structure–Activity Relationships of Benzenesulfonamide‐Based Inhibitors towards Carbonic Anhydrase Isoform Specificity

Carbonic anhydrases (CAs) are implicated in a wide range of diseases, including the upregulation of isoforms CA IX and XII in many aggressive cancers. However, effective inhibition of disease‐implicated CAs should minimally affect the ubiquitously expressed isoforms, including CA I and II, to improve directed distribution of the inhibitors to the cancer‐associated isoforms and reduce side effects. Four benzenesulfonamide‐based inhibitors were synthesized by using the tail approach and displayed nanomolar affinities for several CA isoforms. The crystal structures of the inhibitors bound to a CA IX mimic and CA II are presented. Further in silico modeling was performed with the inhibitors docked into CA I and XII to identify residues that contributed to or hindered their binding interactions. These structural studies demonstrated that active‐site residues lining the hydrophobic pocket, especially positions 92 and 131, dictate the positional binding and affinity of inhibitors, whereas the tail groups modulate CA isoform specificity. Geometry optimizations were performed on each ligand in the crystal structures and showed that the energetic penalties of the inhibitor conformations were negligible compared to the gains from active‐site interactions. These studies further our understanding of obtaining isoform specificity when designing small molecule CA inhibitors.     

New glass-based coatings coloured with red pigments for Foamglas® panels

This work describes the design and development of new coloured glass-based coatings for Foamglas^® substrates. Four kinds of pigments were added in different proportions (1 and 5 wt% respectively) to a borate glassy matrix (labelled as G7) by two different mixing techniques; the chosen pigments were goethite (α-FeOOH), acicular hematite (Fe₂O₃) spherical hematite and TiO₂ coated hematite. No interaction occurred between the selected pigments and the G7 matrix and consequently no new phases were formed in the reported experimental conditions. Coatings on the Foamglas^® substrates were sintered at 560 °C for 1 h and showed different porosity, pigment dispersion in the matrix and colour development, depending on the mixing technique.The porosity was exploited to add TiO₂ coated hematite into the coating, for photo-catalytic purposes. Each coating was deposited without affecting the Foamglas^® substrate porous structure.     

Polymeric Nanoparticle-Based Photodynamic Therapy for Chronic Periodontitis in Vivo

Antimicrobial photodynamic therapy (aPDT) is increasingly being explored for treatment of periodontitis. Here, we investigated the effect of aPDT on human dental plaque bacteria in suspensions and biofilms in vitro using methylene blue (MB)-loaded poly(lactic-co-glycolic) (PLGA) nanoparticles (MB-NP) and red light at 660 nm. The effect of MB-NP-based aPDT was also evaluated in a clinical pilot study with 10 adult human subjects with chronic periodontitis. Dental plaque samples from human subjects were exposed to aPDT—in planktonic and biofilm phases—with MB or MB-NP (25 µg/mL) at 20 J/cm² in vitro. Patients were treated either with ultrasonic scaling and scaling and root planing (US + SRP) or ultrasonic scaling + SRP + aPDT with MB-NP (25 µg/mL and 20 J/cm²) in a split-mouth design. In biofilms, MB-NP eliminated approximately 25% more bacteria than free MB. The clinical study demonstrated the safety of aPDT. Both groups showed similar improvements of clinical parameters one month following treatments. However, at three months ultrasonic SRP + aPDT showed a greater effect (28.82%) on gingival bleeding index (GBI) compared to ultrasonic SRP. The utilization of PLGA nanoparticles encapsulated with MB may be a promising adjunct in antimicrobial periodontal treatment.     

Effect of Cultivation Parameters on Fermentation and Hydrogen Production in the Phylum Thermotogae

The phylum Thermotogae is composed of a single class (Thermotogae), 4 orders (Thermotogales, Kosmotogales, Petrotogales, Mesoaciditogales), 5 families (Thermatogaceae, Fervidobacteriaceae, Kosmotogaceae, Petrotogaceae, Mesoaciditogaceae), and 13 genera. They have been isolated from extremely hot environments whose characteristics are reflected in the metabolic and phenotypic properties of the Thermotogae species. The metabolic versatility of Thermotogae members leads to a pool of high value-added products with application potentials in many industry fields. The low risk of contamination associated with their extreme culture conditions has made most species of the phylum attractive candidates in biotechnological processes. Almost all members of the phylum, especially those in the order Thermotogales, can produce bio-hydrogen from a variety of simple and complex sugars with yields close to the theoretical Thauer limit of 4 mol H₂/mol consumed glucose. Acetate, lactate, and L-alanine are the major organic end products. Thermotagae fermentation processes are influenced by various factors, such as hydrogen partial pressure, agitation, gas sparging, culture/headspace ratio, inoculum, pH, temperature, nitrogen sources, sulfur sources, inorganic compounds, metal ions, etc. Optimization of these parameters will help to fully unleash the biotechnological potentials of Thermotogae and promote their applications in industry. This article gives an overview of how these operational parameters could impact Thermotogae fermentation in terms of sugar consumption, hydrogen yields, and organic acids production.     

Tumor-Derived Small Extracellular Vesicles Induce Pro-Inflammatory Cytokine Expression and PD-L1 Regulation in M0 Macrophages via IL-6/STAT3 and TLR4 Signaling Pathways

Tumor-associated macrophages play a key role in promoting tumor progression by exerting an immunosuppressive phenotype associated with the expression of programmed cell death ligand 1 (PD-L1). It is well known that tumor-derived small extracellular vesicles (SEVs) affect the tumor microenvironment, influencing TAM behavior. The present study aimed to examine the effect of SEVs derived from colon cancer and multiple myeloma cells on macrophage functions. Non-polarized macrophages (M0) differentiated from THP-1 cells were co-cultured with SEVs derived from a colorectal cancer (CRC) cell line, SW480, and a multiple myeloma (MM) cell line, MM1.S. The expression of PD-L1, interleukin-6 (IL-6), and other inflammatory cytokines as well as of the underlying molecular mechanisms were evaluated. Our results indicate that SEVs can significantly upregulate the expressions of PD-L1 and IL-6 at both the mRNA and protein levels and can activate the STAT3 signaling pathway. Furthermore, we identified the TLR4/NF-kB pathway as a convergent mechanism for SEV-mediated PD-L1 expression. Overall, these preliminary data suggest that SEVs contribute to the formation of an immunosuppressive microenvironment.