Effects of Sc2O3 and MgO passivation layerson the output power of AlGaN/GaN HEMTs

The low temperature (100°C) deposition of Sc₂O₃ or MgO layers is found to significantly increase the output power of AlGaN/GaN HEMTs. At 4 GHz, there was a better than 3 dB increase in output power of 0.5×100 μm² HEMTs for both types of oxide passivation layers. Both Sc₂ O₃ and MgO produced larger output power increases at 4 GHz than conventional plasma-enhanced chemical vapor deposited (PECVD) SiN_x passivation which typically showed ⩽2 dB increase on the same types of devices. The HEMT gain also in general remained linear over a wider input power range with the Sc₂O₃ or MgO passivation. These films appear promising for reducing the effects of surface states on the DC and RF performance of AlGaN/GaN HEMTs     

Endoscopic surveillance of Barrett's esophagus: a cost-effectiveness comparison with mammographic surveillance for breast cancer

OBJECTIVE: Endoscopic surveillance of Barrett's esophagus is commonly practiced to detect malignancy in an early and curable stage. However, the cost-effectiveness of this practice has been questioned. To clarify this issue, we undertook a cost analysis of endoscopic surveillance to detect adenocarcinoma in Barrett's esophagus compared with mammography used to detect occult carcinoma of the breast, a widely accepted cancer surveillance technique. METHODS: The rate of esophageal adenocarcinoma detected by endoscopic surveillance was calculated for Duluth Clinic patients with Barrett's esophagus seen from 1980 to 1995 and compared with published rates. The rate of occult breast cancer detection was calculated for all women undergoing surveillance mammography at the Duluth Clinic for the year 1994 and compared with published rates. Costs for screening studies and therapy for cancer treatment for both cancers were calculated based on clinical results and assumptions regarding outcomes derived from published reports, and the costs were compared. RESULTS: Endoscopic surveillance of 149 patients with benign Barrett's esophagus was performed for a total of 510 patient-yr, during which time seven patients developed adenocarcinoma, an incidence of one case per 73 patient-yr of follow-up. Occult breast cancer was detected in 50 of 12,537 mammograms, a detection rate of 0.4%. The incidences in both cases were comparable to published figures. The costs of detecting a case of adenocarcinoma in Barrett's esophagus and occult breast cancer were $37,928 and $54,513, respectively, and those for treatment resulting in cure were $83,340 and $83,292. Cost per life-yr saved was $4,151 for adenocarcinoma in Barrett's esophagus and $57,926 for breast cancer. CONCLUSION: Endoscopic surveillance of patients with Barrett's esophagus compares favorably with the common practice of surveillance mammography to detect early breast cancer, and should therefore be considered to be as cost-effective as surveillance mammography.     

Peptide growth factors in the prostate as mediators of stromal epithelial interaction

Peptide growth factors play a role in the maintenance of normal prostatic growth and differentiation (Fig. 2). It seems likely that the androgen sensitivity of human prostate is mediated by the production of peptide growth factors from stromal cells which act as the direct intermediate of androgen action on epithelial cells. TGF-beta 1 inhibition of epithelial cells is opposed by the stimulatory action of EGF, IGF and FGFs to maintain an equilibrium of epithelial cell numbers. The indirect mitogenic action of androgens appear to act by down-regulation of TGF-beta 1 and possibly EGF receptors. There is also interaction with the effects of IGF-II, produced by prostatic stromal cells and acting on epithelial cells to increase proliferation. The growth of normal prostatic fibroblasts is under the control of bFGF and TGF-beta 1. However, although our understanding of the actions of these growth factors in the normal prostate has improved over the last decade, their role in the development and maintenance of prostate cancer is less clearly defined. TGF-beta 1, classically considered to be inhibitory for epithelial cells, may be up-regulated in prostatic tumours, stimulating growth. Alternatively, autocrine production of such growth factors by tumour cells may lead to loss of inhibitory effects from exogenous TGF-beta 1, a mechanism also witnessed with TGF-alpha and bFGF. The role of EGF in the development of prostate cancer is confusing because results from the use of different cell types and experimental conditions is contradictory. It may be that a switch in the production of the predominant EGFr ligand from EGF to TGF-alpha is an important feature in the development and maintenance of the malignant phenotype. The presence of TGF-alpha autocrine loops has been shown clearly in some tumour cell lines. This switch in the production of a particular ligand may also be a feature of IGFs in prostate cancer. IGF-II may be replaced by IGF-I during malignant progression, both of which are able to act via the type 1 receptor. This change in IGF expression appears to be accompanied by altered expression of the IGF-BP2, with less detectable within prostatic tissues but elevated serum levels [58]. Basic FGF is normally produced by prostatic fibroblasts but is also produced by some prostatic cancer cell lines [64]. However, as with all growth factors, the expression of the bFGF protein and its receptor is dependent on the cell line examined. The autocrine and paracrine control of normal and abnormal prostatic growth by growth factors is important in determining their role in the development and maintenance of prostate cancer. Better understanding of such mechanisms is essential for the development of novel therapeutic strategies in the control and treatment of prostate cancer.     

《无机及分析化学》在多媒体教学的应用及思考

对多媒体技术在无机及分析化学教学的应用进行了，阐述和分析，指出使用多媒体教学应注意的问题。     

A helical drive in-pipe robot based on compound planetary gearing

The modern society is fuelled by very comprehensive grids of gas and liquid pipelines. In recent years, various in-pipe robots have been developed for inspection and maintenance tasks inside such pipes. In this paper, a novel in-pipe robot is proposed and developed for gas/oil well interventions at thousands of meters downhole. Due to the nature of such intervention, in-pipe robot design must be capable of carrying a very large payload, as large as 2500?N inside a pipe with diameter as small as 54?mm. The proposed design concept is based on a compound planetary gearing system. One of the major novelties of this design is the use of pipe wall as a ring gear for one stage of the compound planetary gear system; the other novelty is the generation of helical angle when the planetary gears are expanded to press on the pipe wall. The proposed concept is compact, efficient, and has never been reported before. In this paper, the helical angle, the velocity, and load capability of the proposed system will be analyzed. The load transportation capability of the proposed robot is also measured based on an experiment. Initial data have shown great potential in carrying large payloads.     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

Model of cold crystallization of uniaxially oriented poly(ethylene terephthalate) fibers

The differential scanning calorimeter heating curves of uniaxially oriented poly(ethylene terephthalate) (PET) fibers with three peaks were analyzed by using a newly proposed equation. The diffusion-controlled crystallization theory is suitable for describing cold crystallization of uniaxially oriented PET fibers. A crystallization model was proposed based on the kinetic parameters obtained. The model embraces the three sub-processes of crystallization corresponding to different growth geometries. The first sub-process corresponds to the nucleation of ordered molecular segments or the radial growth of preformed nucleus, resulting in the shorter bundle-like entities. The second sub-process corresponds to further growth of the bundle-like crystallites along chain direction, resulting in the longer bundle-like entities. The third sub-process corresponds to the three-dimensional growth of crystallites relating to the random segments, resulting in the spherical entities.     

Simultaneous spectrophotometric determination of copper(II), lead(II) and cadrnium(II)

The full spectrum technique in the fourier domain was studied for simultaneous determination of Cu(II), Pb(II) and Cd(II) with 4-(2-pyridylazo) resorcinol (PAR). A program called SPGRFSQ. was designed to perform the calculations. Seven error functions were calculated for deducing the number of factors. Data reduction was performed using principal component analysis (PCA) algorithm. Experimental results showed the method to be successful even where there was severe overlap of spectra.