Premodification of Pt/γAl2O3 with Cinchonidine for the Enantioselective Hydrogenation of Ethyl Pyruvate: Effect of Premodification Conditions on Reaction Rate and Enantioselection

The premodification of a 5 wt% Pt/-Al₂O₃ catalyst with cinchonidine (0.01 and 0.2 g g^-1 _catalyst) is described and discussed. Premodification is carried out by treating the catalyst with a solution of cinchonidine followed by solvent removal. Catalysts premodified in this way give the same ee and initial rate of reaction for the enantioselective hydrogenation of ethyl pyruvate as those using the standard in situ modification procedure. Investigations of different solvents for premodification and reaction (dichloromethane, ethanol) show that it is the solvent used for the reaction that controls the observed enantioselection. Premodified catalysts also display the initial transient behavior typically observed with in situ modified catalysts in which the ee increases with conversion in the early part of the reaction. Premodified catalysts show an enhanced rate of reaction when ethanol is used as the reaction solvent compared with in situ modified catalysts under the same conditions. Premodification using aerobic conditions gives the best results and premodified catalysts can be stored prior to use for up to a week without loss of catalytic performance.     

Evidence of an oviposition stimulant for peachtree borer

Peachtree borer (PTB) cocoons, peach tree bark, and a mixture of frass and gum obtained arount PTB wounds were extracted with organic solvents of increasing polarity. Female PTB moths,Synanthedon exitiosa (Say), laid the greatest number of eggs on filter paper substrates treated with acetone extracts of PTB cocoons, ethyl acetate extracts of peach tree bark and acetone extracts of frass and gum mixtures. The extracts of cocoons or frass and gum mixture were separated by liquid chromatography and thin layer chromatography.Synanthedon exitiosa (Say).Mention of a commercial or proprietory product does not constitute an endorsement of this product by the USDA.     

Electrothermal study of carbon loaded ethylene-vinylacetate copolymer

Temperature dependence of resistance of carbon black loaded ethylene-vinylacetate (EVA) copolymer was studied from ?100 to 250°C in a modified differential scanning calorimeter (DSC) apparatus. Both room temperature resistivity and positive temperature coefficient of resistance (PTC) effects can be correlated with carbon black parameters (structure, surface area, porosity). Room temperature resistivity and the degree of increase of resistivity, (ratio of maximum to minimum) progressively decrease with carbon black structure if occlusion of polymer by carbon black is considered in calculating the volume fraction. An integrated surface areastructure-porosity equivalence of the carbon black is derived by introducing factors proportional to the volume and porosity of the black used. Any black parameter that increases conductivity (loading, surface area, structure, porosity) decreases the PTC effect. A cable compounder can therefore minimize the undesirable impact of PTC by suitable choice of black-parameters. The necessary considerations for other uses, where PTC effect is used for microswitches, heaters, etc., will be just the opposite. The modified DSC method provides a quick scanning tool for determining the suitability of semicrystalline polymer recipes, either for cable or for any other material using the PTC effect.     

Isolation kernel: the X factor in efficient and effective large scale online kernel learning

Large scale online kernel learning aims to build an efficient and scalable kernel-based predictive model incrementally from a sequence of potentially infinite data points. Current state-of-the-art large scale online kernel learning focuses on improving efficiency. Two key approaches to gain efficiency through approximation are (1) limiting the number of support vectors, and (2) using an approximate feature map. They often employ a kernel with a feature map with intractable dimensionality. While these approaches can deal with large scale datasets efficiently, this outcome is achieved by compromising predictive accuracy because of the approximation. We offer an alternative approach that puts the kernel used at the heart of the approach. It focuses on creating a sparse and finite-dimensional feature map of a kernel called Isolation Kernel. Using this new approach, to achieve the above aim of large scale online kernel learning becomes extremely simple—simply use Isolation Kernel instead of a kernel having a feature map with intractable dimensionality. We show that, using Isolation Kernel, large scale online kernel learning can be achieved efficiently without sacrificing accuracy.

     

Development of a high pressure automated lag time apparatus for experimental studies and statistical analyses of nucleation and growth of gas hydrates

Nucleation in a supercooled or a supersaturated medium is a stochastic event, and hence statistical analyses are required for the understanding and prediction of such events. The development of reliable statistical methods for quantifying nucleation probability is highly desirable for applications where control of nucleation is required. The nucleation of gas hydrates in supercooled conditions is one such application. We describe the design and development of a high pressure automated lag time apparatus (HP-ALTA) for the statistical study of gas hydrate nucleation and growth at elevated gas pressures. The apparatus allows a small volume (≈150 μl) of water to be cooled at a controlled rate in a pressurized gas atmosphere, and the temperature of gas hydrate nucleation, T(f), to be detected. The instrument then raises the sample temperature under controlled conditions to facilitate dissociation of the gas hydrate before repeating the cooling-nucleation cycle again. This process of forming and dissociating gas hydrates can be automatically repeated for a statistically significant (>100) number of nucleation events. The HP-ALTA can be operated in two modes, one for the detection of hydrate in the bulk of the sample, under a stirring action, and the other for the detection of the formation of hydrate films across the water-gas interface of a quiescent sample. The technique can be applied to the study of several parameters, such as gas pressure, cooling rate and gas composition, on the gas hydrate nucleation probability distribution for supercooled water samples.     

Stiction issues and actuation of RF LIGA-MEMS variable capacitors

High aspect ratio variable capacitors have been fabricated using deep X-ray lithography and electroplating. Stiction phenomena applicable to high aspect ratio devices are presented, including the conditions for stiction to occur and the critical dimensions of structures. Actuation tests at 3 GHz are also presented and show a maximum capacitance of 0.86 pF with no actuation voltage and a minimum capacitance of 0.70 pF with an actuation voltage of 20 V just before pull-in, which gives a tuning range of 1.23:1. Corresponding Q-factor values are 49.3 and 70.8 respectively. After pull-in, the measured capacitance is 0.61 pF, corresponding to a tuning range of 1.41:1, with a maximum Q-factor of 102.9.     

Electromyographic and neuromuscular variables in post-polio subjects

OBJECTIVE: Post-polio subjects experience functional deterioration many years after developing acute poliomyelitis and have been shown previously to have a deficit in strength recovery after isometric activity. This study characterized the size and stability of the motor units in a group of post-polio subjects with macro and single fiber electromyography (EMG) and correlated these variables with isometric strength, endurance, "work capacity," and strength recovery after fatiguing isometric exercise. DESIGN: A cohort of 12 post-polio subjects was tested for neuromuscular function. Electromyographic variables were determined on a separate day. SETTING: Volunteers were recruited from the community and tested in our neuromuscular research laboratory. SUBJECTS: A volunteer sample was obtained from advertisements. All subjects acknowledged post-polio syndrome symptoms. MAIN OUTCOME MEASURES: Neuromuscular variables were isometric knee extension peak torque, endurance (time to exhaustion) at 40% of maximal torque, tension time index, and recovery of torque at 10 minutes. Electromyographic variables were macro EMG and single fiber EMG (percent blocking and jitter). RESULTS: Macro EMG amplitude was ninefold the control value, and both jitter and blocking were greatly increased in comparison to control values. Isometric strength significantly (p < .05) correlated negatively with macro EMG amplitude. CONCLUSIONS: The weakest subjects had the greatest number of muscle fibers within the motor unit (as measured by macro EMG amplitude). Jitter and blocking did not correlate with neuromuscular function.     

Addressing a state''s physician workforce priorities through the funding of graduate medical education: the TennCare model

OBJECTIVE: To investigate differences in second-, third-, and fourth-year medical students' knowledge of bloodborne pathogen exposure risks, as well as their attitudes toward, and intentions to comply with, Universal Precautions (UP). DESIGN: Cross-sectional survey. PARTICIPANTS AND SETTING: Surveys about students' knowledge, attitudes, and intentions to comply with UP were completed by 111 second-year (preclinical), 80 third-year, and 60 fourth-year medical students at Washington University School of Medicine in the spring of 1996. RESULTS: Preclinical students knew more than clinical students about the efficacy of hepatitis B vaccine, use of antiretroviral therapy after occupational exposure to human immunodeficiency virus, and nonvaccinated healthcare workers' risk of infection from needlestick injuries (P<.001). Students' perceived risk of occupational exposure to bloodborne pathogens and attitudes toward hepatitis B vaccine did not differ, but preclinical students agreed more strongly that they should double glove for all invasive procedures with sharps (P<.001). Clinical students agreed more strongly with reporting only high-risk needlestick injuries (P=.057) and with rationalizations against using UP (P=.008). Preclinical students more frequently reported contemplating or preparing to comply with double gloving, wearing protective eyewear, reporting all exposures, and safely disposing of sharps, whereas students with clinical experience were more likely to report compliance. Clinical students also were more likely to report having "no plans" to practice the first three of these precautions (P<.001). CONCLUSIONS: Differences in knowledge, attitudes, and intentions to comply with UP between students with and without clinical experience may have important implications for the timing and content of interventions designed to improve compliance with UP.     

Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part I. Microstructural evolution

A comprehensive mathematical model of the hot tandem rolling process for aluminum alloys has been developed. Reflecting the complex thermomechanical and microstructural changes effected in the alloys during rolling, the model incorporated heat flow, plastic deformation, kinetics of static recrystallization, final recrystallized grain size, and texture evolution. The results of this microstructural engineering study, combining computer modeling, laboratory tests, and industrial measurements, are presented in three parts. In this Part I, laboratory measurements of static recrystallization kinetics and final recrystallized grain size are described for AA5182 and AA5052 aluminum alloys and expressed quantitatively by semiempirical equations. In Part II, laboratory measurements of the texture evolution during static recrystallization are described for each of the alloys and expressed mathematically using a modified form of the Avrami equation. Finally, Part III of this article describes the development of an overall mathematical model for an industrial aluminum hot tandem rolling process which incorporates the microstructure and texture equations developed and the model validation using industrial data. The laboratory measurements for the microstructural evolution were carried out using industrially rolled material and a state-of-the-art plane strain compression tester at Alcan International. Each sample was given a single deformation and heat treated in a salt bath at 400 °C for various lengths of time to effect different levels of recrystallization in the samples. The range of hot-working conditions used for the laboratory study was chosen to represent conditions typically seen in industrial aluminum hot tandem rolling processes, i.e., deformation temperatures of 350 °C to 500 °C, strain rates of 0.5 to 100 seconds and total strains of 0.5 to 2.0. The semiempirical equations developed indicated that both the recrystallization kinetics and the final recrystallized grain size were dependent on the deformation history of the material i.e., total strain and Zener-Hollomon parameter (Z), where and time at the recrystallization temperature.     

Treatment of pulmonary hypertension with inhaled nitric oxide during hepatic transplantation in an adolescent: reversibility of pulmonary hypertension after transplantation

Accusations of rape or sexual harassment are currently very high-profile in the military. This article discusses rape allegations in the military legal system from a psychiatric perspective. The original definition of "rape trauma syndrome" and subsequent psychiatric thinking about the diagnosis are briefly outlined. Common reactions seen in military victims in this era are described. A prototypical military case is presented. An adequate evaluation of an alleged victim is outlined. Credentials and preparation of an expert witness are also briefly discussed, with cautions about the use of expert testimony in cases of alleged sexual assault and rape trauma syndrome.