Controlled immobilisation of active enzymes on the cowpea mosaic virus capsid

Immobilisation of horseradish peroxidase (HRP) and glucose oxidase (GOX) via covalent attachment of modified enzyme carbohydrate to the exterior of the cowpea mosaic virus (CPMV) capsid gave high retention of enzymatic activity. The number of enzymes bound per virus was determined to be about eleven for HRP and 2-3 for GOX. This illustrates that relatively large biomacromolecules can be readily coupled to the virus surface using simple conjugation strategies. Virus-biomacromolecule hybrids have great potential for uses in catalysis, diagnostic assays or biosensors.     

Phase equilibria studies in the CaO–SiO2–Al2O3–MgO system with CaO/SiO2 ratio of 0.9

Phase equilibria and liquidus temperatures in the CaO–SiO₂–Al₂O₃–MgO system at a CaO/SiO₂ weight ratio of 0.9 in the liquid phase have been experimentally determined employing high-temperature equilibration and quenching technique followed by electron probe X-ray microanalysis. Isotherms at 1573, 1623, 1673, and 1773 K were determined and the primary phase fields of wollastonite, melilite, olivine, periclase, spinel, and corundum have been located. Compositions of the olivine and melilite solid solutions were analyzed and discussed. Comparisons between the newly constructed diagram, existing data, and FactSage predicted phase diagrams were performed and differences were discussed. The present study will be useful for guidance of industrial practices and further development of thermodynamic modeling.     

Computer simulation of structure and properties of crosslinked polymers: application to epoxy resins

In this work, a methodology has been developed for construction of atomistic models of crosslinked polymer networks. The methodology has been applied to low molecular weight water soluble epoxy resins crosslinked with different curing agents that are being considered for use as a primer coating on steel. The simulations allowed the crosslink density and the amount of free crosslinking sites in the coatings to be predicted. Shrinkage of the resin upon curing was reproduced by the simulation. In addition, the barrier properties of the model coatings were estimated. The interface between an inorganic substrate and cured epoxy resin has been constructed and the strength and molecular mechanisms of adhesion have been revealed. The developed methodology has a potential to significantly impact on the design and development of new coatings with improved barrier and adhesion properties.     

A reduced reaction model for carbon CVD/CVI processes

Carbon-carbon composites are produced by chemical vapor deposition/chemical vapor infiltration (CVD/CVI) processes. Models of carbon-carbon composite production processes will help reduce production costs. Reliable process models must, however, include details of the gas phase kinetics in order to identify optimal conditions. We have combined detailed gas phase kinetics, surface kinetics, and a pore closure model to predict pore geometry changes with respect to time. To determine the dominant gas phase kinetics, we reduced a large set of reactions to a minimal set using a sensitivity, rate, and dimensional analysis approach. These robust and relatively fast techniques can be used under a variety of conditions, including those within the pores of the composite. The process model shows that the deposition profile depends on the kinetic model chosen. Using the more realistic reaction model, conditions for uniform, or inside-out, densification can be suggested.     

In Situ Formation of a Novel Nanocomposite Structure Based on MCM-41 and Polyethylene

M41S materials are prepared by in situ assembly of inorganic precursors and organic template and can be viewed as nanocomposites of the siliceous phase and organic surfactant. Calcination of these precursors gives the M41S materials that have been used to prepare novel nanocomposite structures, in which the organic phase inside the nano-sized pores is isolated by the nano-sized inorganic pore walls. The nanocomposite structures can be formed by in situ polymerization of monomers inside the channels. Polymerization of ethylene takes place inside the nano-sized pores, producing the desired nanocomposite structure. The resulting polyethylene was found to be a mixture of crystalline and amorphous phases.     

Direct Ink-Jet Printing of Vertical Walls

Direct jet printing can assemble ceramic powder into a three dimensional shape by firing droplets of ink through a nozzle to build a multiple layered structure. As with stereolithography and selective laser sintering, the surface texture is expected to witness the layered assembly. The ability to create vertical walls by direct ink-jet printing was explored using a test piece based on a maze. The structure and topography are discussed in terms of droplet spreading and drying.     

Over-production of 5-enolpyruvylshikimate-3-phosphate synthase in Escherichia coli: use of the T7 promoter

5-Enolpyruvylshikimate-3-phosphate (EPSP) synthase, the productof the Escherichia coli aroA gene, has been overproduced inE.coli BL21(DE3) under the control of the T7 gene 10 promoterand ribosome binding site, to a level of {small tilde}50% oftotal cell protein. EPSP synthase is the primary target of thepost-emergence herbicide, glyphosate, commonly known as Roundup^TM.A simple two step purification is described, which results in99% pure homogeneous protein (as determined by PAGE). The integrityof the protein has been compared with previously characterizedprotein from .E.coli AB2829(pKD501) by determination of itskinetic parameters, N-terminal protein and DNA sequences, aminoacid analysis and ¹³C-NMR spectroscopy. This new overproducingstrain readily provides the gram quantities of highly pure proteinrequired for NMR studies of the active site and the developmentof novel time-resolved solid-state NMR techniques currentlyunderway in this laboratory.     

Formulation of a ceramic ink for a wide-array drop-on-demand ink-jet printer

This paper describes the methodology for simulating a reprographic ink with a ceramic ink based on a commercially available zirconia powder for direct ceramic ink-jet printing. Of over-riding importance was matching viscosity and this was tested systematically by using a mineral oil–hexane binary system. Of secondary importance was adjustment of the pressure defect behind the nozzle to compensate for small differences in surface tension. The inks tested in the wide array print-head were based on low electrical conductivity liquids to avoid damage to the electroding system. The organic binder for the zirconia ink was paraffin wax and the dispersant was a hydroxystearic acid based polyester.     

Bubble Formation at a Rotating Cylindrical Surface in Cross‐Flowing Liquid

A novel method of gas sparging from a rotating cylinder is proposed, which prevents against formation of large attached gas cavities in cross‐flowing liquids including those flowing downwards. Experimental and theoretical results regarding critical rotation speed necessary to remove the attached cavity, bubble formation process and size distribution of the produced bubbles in a low viscosity system (air‐water) are presented in this study.     

Diffuse color patterning using blended electrochromic polymers for proof‐of‐concept adaptive camouflage plaques

A study using three different pairs of electrochromic polymers (ECPs) synthesized onto plaques by means of a modified vapor phase polymerization (VPP) technique is presented. Restriction of the respective polymerization times, allowed both faster and slower polymerizing monomers to be controlled, and produced blended plaques with visually diffuse interfaces. The ECPs within the blended plaques retain their individual electrochromic behavior and when encapsulated into an electrochromic device, show outstanding optical switching performance with little degradation evident over 10,000 cycles, coupled with a switching time of the order of 1 second. Blends also allow multiple diffuse color changes within an electrochromic device, due to the difference in oxidation potentials of the individual ECPs, making them candidates for adaptive camouflage use. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42158.