Broadband system to increase bitrate in train communication networks

MVB (Multifunction Vehicle Bus), defined in IEC 61375, has been broadly adopted as the communication standard between embedded control systems on-board modern trains. In this work a new method to take advantage of the full bandwidth of the channel using an OFDM technique is described. With this new method it is possible to share the physical medium between standard MVB traffic and new OFDM traffic. A 90 Mbps theoretical bitrate can be achieved. The results of this work have been validated in a test bench including standard MVB nodes transmitting on a line similar to a real vehicle bus.     

A revision of recent approaches for two-dimensional strip-packing problems

In this paper, we present a review of the recent approaches proposed in the literature for strip-packing problems. Many of them have been concurrently published, given some similar results for the same set of benchmarks. Due to the quantity of published papers, it is difficult to ascertain the level of current research in this area.     

Aerodynamic optimization via multi-objective micro-genetic algorithm with range adaptation,knowledge-based reinitialization,crowding and ε-dominance

In this study, an optimization of the airfoil of a sailplane is carried out by a recently developed multi-objective genetic algorithm based on microevolution, containing crowding, range adaptation, knowledge-based reinitialization and ε-dominance. Its efficiency was tested on a set of test problems. The results are encouraging, suggesting that very small populations can be used effectively to solve real-world multi-objective optimization problems in many cases of interest.     

Resilient overlay network for real-time interactive multimedia sessions in corporate networks

Real-time interactive multimedia communications are becoming increasingly useful for education, business, e-commerce and e-government, providing an enriched user experience in teleconferencing, e-meetings, distance training and product demonstrations. Large corporations are usually located at several sites, so real-time multipoint sessions within corporations are especially difficult. IP multicast is available or feasible within each site of an organization. Thus, corporate networks can be considered as various multicast-capable networks interconnected through a wide area network without multicast connectivity. This paper proposes a resilient self-managed overlay network to support real-time multipoint interactive sessions within corporate networks. The proposed overlay takes advantage of the configuration of corporate networks to self-organize and provide an efficient media delivery service, making use of multicast communications wherever available. Various self-healing techniques are implemented allowing for the continuity of ongoing sessions in spite of network disruptions and entity failures. Extensive simulations and tests have been carried out to assess the performance and resilience of the overlay facing several types of disruptions.     

A framework for virtual organization requirements

Virtual organizations (VOs) are formed by an alliance of organizations linked by a partnership for dealing with emerging challenges. Information and communication technologies play a fundamental role facilitating cooperation, communication and collaboration among the VO members. The formal identification and representation of Requirements Engineering (RE) for one organization have been researched to a large extent along with several elicitation techniques. However, these techniques are not adequate for covering the major challenges of RE for VO. We explore the work done in the management and RE fields to propose a model-based framework for eliciting VOs’ requirements. The goal is to analyze the VO from two points of view: border (intra-organizational, inter-organizational and extra-organizational) and abstract (intentional, organizational and operational). This article includes the framework validation with a case study and a transformation process to develop partial Business Process Diagram from the intentional models.     

The joint movement of pebbles in solving the ($$N^2-1$$)-puzzle suboptimally and its applications in rule-based cooperative path-finding

The present paper deals with the problem of solving the (\(n^2 - 1\))-puzzle and cooperative path-finding (CPF) problems sub-optimally by rule-based algorithms. To solve the puzzle, we need to rearrange \(n^2 - 1\) pebbles in the \(n \times n\)-sized square grid using one vacant position to achieve the goal configuration. An improvement to the existing polynomial-time algorithm is proposed and experimentally analyzed. The improved algorithm represents an attempt to move pebbles in a more efficient way compared to the original algorithm by grouping them into so-called snakes and moving them together as part of a snake formation. An experimental evaluation has shown that the snakeenhanced algorithm produces solutions which are 8–9 % shorter than the solutions generated by the original algorithm. Snake-like movement has also been integrated into the rule-based algorithms used in solving CPF problems sub-optimally, which is a closely related task. The task in CPF consists in moving a group of abstract robots on an undirected graph to specific vertices. The robots can move to unoccupied neighboring vertices; no more than one robot can be placed in each vertex. The (\(n^2 - 1\))-puzzle is a special case of CPF where the underlying graph is a 4-connected grid and only one vertex is vacant. Two major rule-based algorithms for solving CPF problems were included in our study—BIBOX and PUSH-and-SWAP (PUSH-and-ROTATE). The use of snakes in the BIBOX algorithm led to consistent efficiency gains of around 30 % for the (\(n^2 - 1\))-puzzle and up to 50 % in for CPF problems on biconnected graphs with various ear decompositions and multiple vacant vertices. For the PUSH-and-SWAP algorithm, the efficiency gain achieved from the use of snakes was around 5–8 %. However, the efficiency gain was unstable and hardly predictable for PUSH-and-SWAP.     

Fracture analysis of plane piezoelectric/piezomagnetic multiphase composites under transient loading

The transient response of cracked composite materials made of piezoelectric and piezomagnetic phases, when subjected to in-plane magneto-electro-mechanical dynamic loads, is addressed in this paper by means of a mixed boundary element method (BEM) approach. Both the displacement and traction boundary integral equations (BIEs) are used to develop a single-domain formulation. The convolution integrals arising in the time-domain BEM are numerically computed by Lubich’s quadrature, which determines the integration weights from the Laplace transformed fundamental solution and a linear multistep method. The required Laplace-domain fundamental solution is derived by means of the Radon transform in the form of line integrals over a unit circumference. The singular and hypersingular BIEs are numerically evaluated in a precise and efficient manner by a regularization procedure based on a simple change of variable, as previously proposed by the authors for statics. Discontinuous quarter-point elements are used to properly capture the behavior of the extended crack opening displacements (ECOD) around the crack-tip and directly evaluate the field intensity factors (stress, electric displacement and magnetic induction intensity factors) from the computed nodal data. Numerical results are obtained to validate the formulation and illustrate its capabilities. The effect of the combined application of electric, magnetic and mechanical loads on the dynamic field intensity factors is analyzed in detail for several crack configurations under impact loading.     

An Analysis of Edge Detection by Using the Jensen-Shannon Divergence

This work constitutes a theoretical study of the edge-detection method by means of the Jensen-Shannon divergence, as proposed by the authors. The overall aim is to establish formally the suitability of the procedure of edge detection in digital images, as a step prior to segmentation. In specific, an analysis is made not only of the properties of the divergence used, but also of the method's sensitivity to the spatial variation, as well as the detection-error risk associated with the operating conditions due to the randomness of the spatial configuration of the pixels. Although the paper deals with the procedure based on the Jensen-Shannon divergence, some problems are also related to other methods based on local detection with a sliding window, and part of the study is focused to noisy and textured images.     

CASANDRA: a prototype implementation of a system of network progressive transmission of medical digital images

In this paper, a prototype for progressive transmission of medical digital 2D images through the network, called CASANDRA, is presented. The prototype consists of the server part and the client part. In the server part, the images are acquired, stored, computed their wavelet transform and the wavelet coefficients stored, then transmitted progressively, when required, via TCP to the client. In the client part, with the inverse wavelet transform, the received wavelet coefficients are used to build successive improved reconstructions of the image.This prototype has been implemented and is being tested in the Radiotherapy Service of the Valencia University Hospital (Valencia, Spain).