A comparison of light spot hydrophone and fiber optic probe hydrophone for lithotripter field characterization

The performance of a newly developed light spot hydrophone (LSHD) in lithotripter field characterization was compared to that of the fiber optic probe hydrophone (FOPH). Pressure waveforms produced by a stable electromagnetic shock wave source were measured by the LSHD and FOPH under identical experimental conditions. In the low energy regime, focus and field acoustic parameters matched well between the two hydrophones. At clinically relevant high energy settings for shock wave lithotripsy, the measured leading compressive pressure waveforms matched closely with each other. However, the LSHD recorded slightly larger |P_| (p < 0.05) and secondary peak compressive pressures (p < 0.01) than the FOPH, leading to about 20% increase in total acoustic pulse energy calculated in a 6 mm radius around the focus (p = 0.06). Tensile pulse durations deviated ~5% (p < 0.01) due to tensile wave shortening from cavitation activity using the LSHD. Intermittent compression spikes and laser light reflection artifacts have been correlated to bubble activity based on simultaneous high-speed imaging analysis. Altogether, both hydrophones are adequate for lithotripter field characterization as specified by the international standard IEC 61846.     

High power pulsed lasers

Pulsed high power lasers can deliver sufficient energy on inertial fusion time scales (0.1–10 ns) to heat and compress DT fuel to fusion reaction conditions. Several laser systems have been examined for application to the fusion problem. Examples are Ndglass, CO₂, KrF, and I₂, etc. A great deal of developmental effort has been applied to the Ndglass laser and the CO₂ gas laser systems. These systems now deliver >10⁴ kJ and >20×10¹² W to inertial fusion targets. The Nova Ndglass laser is being constructed to provide >200 kJ and >200×10¹² W of 1 m radiation for fusion experimentation in the mid-1980s. For inertial fusion target gain, >100 times the laser input, it is expected that the laser must deliver 3–5 MJ of energy on the 10–20 ns time scale. This paper reviews the developments in laser technology and outlines approaches to construction of a 3–5 MJ driver.     

A Suite of Tools for Debugging Distributed Autonomous Systems

This paper describes a set of tools that enables developers to log and analyze the run-time behavior of distributed control systems. A feature of the tools is that they can be applied to distributed systems. The logging tools enable developers to instrument C or C++ programs so that data indicating state changes can be logged automatically in a variety of formats. In particular, run-time data from distributed systems can be synchronized into a single relational database. Tools are also provided for visualizing the logged data. Analysis to verify correct program behavior is done using a new interval logic that is described in this paper. The logic enables system engineers to express temporal specifications for the autonomous control program that are then checked against the logged data. The data logging, visualization, and interval logic analysis tools are all fully implemented. Results are given from a NASA distributed autonomous control system application.     

Logical approximation for program analysis

The abstract interpretation of programs relates the exact semantics of a programming language to a finite approximation of those semantics. In this article, we describe an approach to abstract interpretation that is based in logic and logic programming. Our approach consists of faithfully representing a transition system within logic and then manipulating this initial specification to create a logical approximation of the original specification. The objective is to derive a logical approximation that can be interpreted as a terminating forward-chaining logic program; this ensures that the approximation is finite and that, furthermore, an appropriate logic programming interpreter can implement the derived approximation. We are particularly interested in the specification of the operational semantics of programming languages in ordered logic, a technique we call substructural operational semantics (SSOS). We show that manifestly sound control flow and alias analyses can be derived as logical approximations of the substructural operational semantics of relevant languages.     

BetweenIT: An Interactive Tool for Tight Inbetweening

The generation of inbetween frames that interpolate a given set of key frames is a major component in the production of a 2D feature animation. Our objective is to considerably reduce the cost of the inbetweening phase by offering an intuitive and effective interactive environment that automates inbetweening when possible while allowing the artist to guide, complement, or override the results. Tight inbetweens, which interpolate similar key frames, are particularly time‐consuming and tedious to draw. Therefore, we focus on automating these high‐precision and expensive portions of the process. We have designed a set of user‐guided semi‐automatic techniques that fit well with current practice and minimize the number of required artist‐gestures. We present a novel technique for stroke interpolation from only two keys which combines a stroke motion constructed from logarithmic spiral vertex trajectories with a stroke deformation based on curvature averaging and twisting warps. We discuss our system in the context of a feature animation production environment and evaluate our approach with real production data.     

Pesticide residues in foodstuffs in Great Britain: XII.—Organochlorine insecticide residues in hens' eggs from battery,deep-Utter and free-range systems and from houses containing insecticide thermal vaporisers

A study has been made of the organochlorine pesticide residues in hens' eggs produced in battery, deep-litter and free-range systems. Low residues (less than 0.05 ppm) were found except where the birds or their houses had been deliberately treated with pesticides to eradicate fleas or lice. A separate study was also made of eggs produced in houses which had insecticide thermal vaporisers installed in them. The results were variable, depending on a number of factors, but relatively high levels of BHC and DDT were found regularly in the eggs from some of these houses.     

Carbon Diffusion in Lanthanum Erbium Carbide Stabilized in the Cubic Fluorite Structure

Lanthanum erbium carbide, La_0.5Er_0.5C₂, a salt-like carbide with a cubic fluorite phase structure, has been produced from ¹³C, allowing carbon diffusion rate to be determined using ¹²C. Carbon in salt-like carbides exhibits significant ionicity, and a high carbon diffusion rate would enable a new class of high temperature fuel cells based on carbon-ion transport. The complete lack of carbon diffusion data for salt-like carbides is the motivation for this work. The carbon diffusion rate in La_0.5Er_0.5C₂ has now been determined to be 2.0 ± 0.8 × 10⁻¹³ cm²/s at 850 °C, increasing to 1.8 ± 0.8 × 10⁻¹¹ cm²/s at 1150 °C, with an activation energy of about 95 kJ/mole. These diffusion rates are too low for a carbon-ion fuel cell, but a number of other salt-like carbides exist. Be₂C, in particular, is a salt-like carbide with an antifluorite structure, and should have higher carbon-ion diffusion than cubic La_0.5Er_0.5C₂ due to the unoccupied octahedral sites in the antifluorite structure, but Be₂C presents special difficulties due to the toxic nature of its hydrolysis products.     

Use of Steel Slag Leach Beds for the Treatment of Acid Mine Drainage

Steel slag from the Waylite steel-making plant in Bethlehem, Pennsylvania was leached with acidic mine drainage (AMD) of a known quality using an established laboratory procedure. Leaching continued for 60 cycles and leachates were collected after each cycle. Results indicated that the slag was very effective at neutralizing acidity. The AMD/slag leachates contained higher average concentrations of Ba, V, Mn, Cr, As, Ag, and Se and lower average concentrations of Sb, Fe, Zn, Be, Cd, Tl, Ni, Al, Cu, and Pb than the untreated AMD. Based on these tests, slag leach beds were constructed at the abandoned McCarty mine site in Preston County, West Virginia. The leach beds were constructed as slag check dams below limestone-lined settling basins. Acid water was captured in limestone channels and directed into basins to leach through the slag dams and discharge into a tributary of Beaver Creek. Since installation in October 2000, the system has been consistently producing net alkaline, pH 9 water. The treated water is still net alkaline and has a neutral pH after it encounters several other acidic seeps downstream.     

Microbial partitioning to settleable particles in stormwater

The degree to which microbes in the water column associate with settleable particles has important implications for microbial transport in receiving waters, as well as for microbial removal via sedimentation (i.e. detention basins). The partitioning behavior of several bacterial, protozoan and viral indicator organisms is explored in three urban streams under both storm and dry weather conditions. The fraction of organisms associated with settleable particles in stormwater is estimated through use of a centrifugation technique which is calibrated using suspensions of standard particles (e.g., glass, latex). The fraction of organisms associated with settleable particles varies by type of microbe, and the partitioning behavior of each organism generally changes between dry weather and storm conditions. Bacterial indicator organisms (fecal coliforms, Escherichia coli, enterococci) exhibited relatively consistent behavior, with an average of 20-35% of organisms associated with these particles in background samples and 30-55% in storm samples. Clostridium perfringens spores exhibited the highest average level of particle association, with storm values varying from 50% to 70%. Results related to total coliphage partitioning were more variable, with 20-60% associated with particles during storms. These estimates should be valuable in surface water quality modeling efforts, many of which currently assume that all microbes exist as free (unattached) organisms.     

Micro-channel development and hydrogen adsorption properties in templated microporous carbons containing platinum nanoparticles

Ordered microporous carbons containing dispersed platinum nanoparticles were fabricated and chosen as suitable models to investigate micro-structure development and hydrogen transport properties of zeolite-templated carbons. X-ray photoelectron spectroscopy analysis revealed that the enhanced heat of adsorption is related to the narrow micro-channels templated from the zeolite and the presence of certain CO groups on the carbon. The lack of a well-defined and intense rotational transition line and the persistent broad H₂ recoil spectrum in neutron scattering results suggests a distribution of binding sites. Most interestingly, hydrogen diffusion occurs on two time scales, consisting of a fast liquid-like jump diffusion on the timescale of picoseconds along with an even faster bulk-like diffusion. The liquid-like motion is characterized by a diffusion constant of (2.1 ± 0.3) × 10⁻⁸ m²/s with an activation energy of ca. 77 K; both values indicate somewhat lower mobility than similar dynamics of H₂ on nanotubes, activated carbon XC-72, or Grafoil, yet greater mobility than that of bulk liquid. These unusual characteristics for hydrogen in carbons are believed to arise from the network of narrow pores in this zeolite-templated image of the zeolite. In fact, the diffusion constants of the templated carbons are extremely similar to those measured for zeolite 13X.