Engineering the Losses and Beam Divergence in Arrays of Patch Antenna Microcavities for Terahertz Sources

We perform a comprehensive study on the emission from finite arrays of patch antenna microcavities designed for the terahertz range by using a finite element method. The emission properties including quality factors, far-field pattern, and photon extraction efficiency are investigated for etched and non-etched structures as a function of the number of resonators, the dielectric layer thickness, and period of the array. In addition, the simulations are achieved for lossy and perfect metals and dielectric layers, allowing to extract the radiative and non-radiative contributions to the total quality factors of the arrays. Our study shows that this structure can be optimized to obtain low beam divergence (FWHM <10°) and photon extraction efficiencies >50% while keeping a strongly localized mode. These results show that the use of these microcavities would lead to efficient terahertz emitters with a low divergence vertical emission and engineered losses.     

Electrical and photovoltaic properties of an organic-inorganic heterojunction based on a BODIPY dye

An organic-inorganic heterojunction based on a BODIPY dyes has been produced by forming dye thin film on n-Si. The electrical parameters of the structure have been investigated by current-voltage (I-V) and capacitance-voltage (C-V) measurements. The ideality factor, the barrier height and the series resistance values of the diode have been calculated as 2.43, 0.84 eV, and about 1.3 kΩ, respectively. The diode behaves as a non-ideal diode because of the series resistance and interface layer. The barrier height value obtained from I-V measurement has been compared with one from C-V measurement. Moreover, it has been seen that the diode is highly sensitive to the light and the reverse bias current increases about 1 × 10⁴ times at −1 V under 100 mW/cm² and AM1.5 illumination condition. The short photocurrent density (J_sc) and the open circuit voltage (V_oc), the fill factor (FF) and power conversion efficiency (η) have been determined as 3.78 mA/cm², 327 mV, 0.28 and 0.48 %, respectively.     

Scan Test Strategy for Asynchronous-Synchronous Interfaces

In the coming years, the well-known synchronous design style will not be able to keep pace with the increase speed and capabilities of integration of advanced processes. New design paradigms, like core reuse of the already designed synchronous modules and asynchronous designs, are considered in order to cope with the ever increasing complexity. The future SoCs will contain multiple synchronous and asynchronous cores. Asynchronous design will become more and more common among digital designers, while synchronous-asynchronous interactions will emerge as a key issue in the future SoC designs.This paper will present test strategies for 2-phase asynchronous-synchronous interfaces and vice versa. It will be shown how test vectors can be automatically generated using commercially available ATPG tools. The generated ATPG vectors will be able to test all stuck-at-faults within the asynchronous-synchronous interfaces.     

Power system operating state forecasting for security analysis applications

A methodology for power system operating state forecasting with applications in the study mode security analysis is described. Additional application areas are advance or dynamic dispatch and measurement replacement. The operating state is represented by the active and reactive nodal injections which are forecast using a four-step procedure: bus active and reactive load forecast, simulation of the economic dispatch and on-line load flow. The multivariate Box and Jenkins approach and the adaptive Kalman filter are used for the active and reactive bus load forecast, respectively. The results of numerical experiments with the proposed methodology indicate a performance with potential for practical applications.     

The effect of field drying on the non-structural carbohydrate composition in vetch hay

Common vetch (Vicia sativa L) was harvested and allowed to dry in the open air. The composition of fresh forage in non-structural carbohydrates varied markedly between years, the contents of sugars and starch in both leaves and stems being much higher in 1990-91 than 1991-92. Field drying produced a significant decrease in the amounts of these carbohydrates. The total losses of sugars and starch in hay, expressed as losses of dry matter, ranged from 28 to 15 g kg^-1, depending on the year.     

Silicon‐Modified Rare‐Earth Transitions—A New Route to Near‐ and Mid‐IR Photonics

Silicon underpins microelectronics but lacks the photonic capability needed for next‐generation systems and currently relies on a highly undesirable hybridization of separate discrete devices using direct band gap semiconductors. Rare‐earth (RE) implantation is a promising approach to bestow photonic capability to silicon but is limited to internal RE transition wavelengths. Reported here is the first observation of direct optical transitions from the silicon band edge to internal f‐levels of implanted REs (Ce, Eu, and Yb); this overturns previously held assumptions about the alignment of RE levels to the silicon band gap. The photoluminescence lines are massively redshifted to several technologically useful wavelengths and modeling of their splitting indicates that they must originate from the REs. Eu‐implanted silicon devices display a greatly enhanced electroluminescence efficiency of 8%. Also observed is the first crystal field splitting in Ce luminescence. Mid‐IR silicon photodetectors with specific detectivities comparable to existing state‐of‐the‐art mid‐IR detectors are demonstrated.     

Information and Telecommunications Project for a Digital City: A Brazilian case study

Making information and telecommunications available is a permanent challenge for cities concerned to their social, urban and local planning and development, focused on life quality of their citizens and on the effectiveness of public management. Such a challenge requires the involvement of everyone in the city. The objective is to describe the information and telecommunications project from the planning of a digital city carried out in Vinhedo-SP, Brazil. It was built as a telecommunications infrastructure of the kind of “open access metropolitan area networks” which enables the integration of citizens in a single telecommunications environment. The research methodology was emphasized by a case study which turned to be a research-action, comprising the municipal administration and its local units. The results achieved describe, by means of a methodology, the phases, sub-phases, activities, approval points and resulting products, and formalize their respective challenges and difficulties. The contributions have to do with the practical feasibility of the project and execution of its methodology. The conclusion reiterates the importance of the project, collectively implemented and accepted, as a tool to help the management of cities, in the implementation of Strategic Digital City Projects, in the decisions of public administration managers, and in the quality of life of their citizens.     

Controlled-resistance loads for induction heating applications using thin non-magnetic metallic layers

The design of controlled-resistance loads for domestic induction heating applications using thin non-magnetic conductive layers is described. Thin metallic layers are fabricated using the phase vapour deposition technique. Such layers would enable vessels, the inductive behaviour of which was similar to those fabricated with conventional ferromagnetic bulk materials, to be manufactured. Optimum layer thickness is investigated using an analytical impedance model of the complete induction system     

Application of the LP-DP approach to Andong and Imha parallel reservoirs,Korea

This paper presents an application of a previously developed linear programming-dynamic programming (LP-DP) methodology to the operation of Andong and Imha parallel reservoirs in South Korea. The model allows for multioptimization of power generation and municipal, industrial, and irrigation water use. It is shown that the annual average energy and the annual average water supply generated from the joint operation of the two parallel reservoirs by the LD-DP approach is 15.2 and 1.7% more than the contracted power production and water supply respectively.     

Molds and Resists Studies for Nanoimprint Lithography of Electrodes in Low-Voltage Polymer Thin-Film Transistors

A low-cost patterning of electrodes was investigated looking forward to replacing conventional photolithography for the processing of low-operating voltage polymeric thin-film transistors. Hard silicon, etched by sulfur hexafluoride and oxygen gas mixture, and flexible polydimethylsiloxane imprinting molds were studied through atomic force microscopy (AFM) and field emission gun scanning electron microscopy. The higher the concentration of oxygen in reactive ion etching, the lower the etch rate, sidewall angle, and surface roughness. A concentration around 30 % at 100 mTorr, 65 W and 70 sccm was demonstrated as adequate for submicrometric channels, presenting a reduced etch rate of 176 nm/min. Imprinting with positive photoresist AZ1518 was compared to negative SU-8 2002 by optical microscopy and AFM. Conformal results were obtained only with the last resist by hot embossing at 120 °C and 1 kgf/cm² for 2 min, followed by a 10 min post-baking at 100 °C. The patterning procedure was applied to define gold source and drain electrodes on oxide-covered substrates to produce bottom-gate bottom-contact transistors. Poly(3-hexylthiophene) (P3HT) devices were processed on high-κ titanium oxynitride (TiO _x N _y ) deposited by radiofrequency magnetron sputtering over indium tin oxide-covered glass to achieve low-voltage operation. Hole mobility on micrometric imprinted channels may approach amorphous silicon (～0.01 cm²/V s) and, since these devices operated at less than 5 V, they are not only suitable for electronic applications but also as sensors in aqueous media.