Quenched BODIPY dye-labeled casein substrates for the assay of protease activity by direct fluorescence measurement

We have prepared casein conjugates of two BODIPY dyes for use as fluorogenic protease substrates in homogeneous assays. Both conjugates are labeled to such an extent that the dyes are efficiently quenched in the protein, yielding virtually nonfluorescent substrate molecules. These fluorogenic substrates release highly fluorescent BODIPY dye-labeled peptides upon protease digestion, with fluorescence increases proportional to enzyme activity. These quenched substrates are suitable for the continuous assay of enzymatic activity using standard fluorometers, filter fluorometers, or fluorescence microplate readers using either fluorescein excitation and emission wavelengths to measure BODIPY FL casein hydrolysis or Texas Red wavelengths to detect proteolysis of BODIPY TR-X casein. Most current techniques for detecting protease activity, such as the fluorescein thiocarbamoyl casein (FTC-casein) protease assay, require extensive manipulation, including separation steps, and are therefore labor intensive and error-prone. In comparison, we found the BODIPY dye-labeled casein protease assays to be simple and precise and to have greater sensitivity and a broader dynamic range of detection than the FTC-casein assay. We were able to sensitively detect the activities of a wide variety of enzymes with these new substrates, including serine, acid, sulfhydryl, and metalloproteases. We also found the assay suitable for quantitating protease inhibitor concentrations and for real-time analysis of proteolysis.     

Effect of crosslinking agent content, monomer functionality, and repeat unit chemistry on properties of unfilled resins

Seven mechanical/physical properties were used to evaluate 10 unfilled resins: eight aromatic dimethacrylates and two urethane dimethacrylates. Physical property tests included compressive strength, Young's modulus in compression, uniaxial tensile strength, intrinsic yield point, toothbrush abrasion, Knoop hardness, and water sorption. Controlled changes were made in the following four material parameters: amount of crosslinking diluent present in the uncured monomer, functionality of the monomer, repeat unit chemistry of the monomer (urethane vs. aromatic structure) and mode of activation (chemical vs. visible light). Polymers containing a high concentration of crosslinking agent (50 wt%) were found to be tougher and to possess lower hardness than materials containing lesser amounts of crosslinking agent. This was attributed to the flexible nature of the triethylene glycol dimethacrylate crosslinking molecule. Exposure to water plasticized the highly crosslinked materials to the degree that the yield point and elastic modulus were effectively lowered. Most of the tested properties were unaffected by differences in functionality except resistance to toothbrush abrasion, which was enhanced for polymers derived from high functionality monomers. The urethane-based polymers sorbed substantially more water than the aromatic-based materials, which presumably resulted in lower values for surface hardness. However, the urethane resins were very tough, and excellent resistance to toothbrush abrasion was observed. Property differences caused by differences in activation mode were small, although the visible light materials did sorb more water.     

Titanium and bioactive glass-ceramic coated titanium as materials for keratoprosthesis

The current problem with keratoprosthesis is the ingrowth of corneal or conjunctival epithelium into the anterior chamber. This may lead to infections and extrusion of the prosthesis as well as to the development of retroprosthetic membrane and secondary glaucoma. Glass-ceramic coated and uncoated titanium has been tested as material for the keratoprosthesis to prevent epithelial ingrowth. Twenty-two Supra-Descemet's membrane keratoprostheses were inserted in the eyes of 22 rabbits for 1, 2, 4, 8, or 12 months. The prosthesis had an optic part made of polymethylmetacrylate (PMMA). The support for the optic part and the flange of the prosthesis were made of titanium. Eleven of the prostheses were coated with glass-ceramic. The histological sections of the enucleated eyes were prepared through the central part of the cornea and the prosthesis using a cutting-grinding method. The histological analysis was made on both halves of the implants separately giving two analysis areas in each eye. All 11 titanium prostheses were retained for the time period planned. Two glass-ceramic coated prostheses were lost at 2 and 4 weeks, respectively. This was caused by difficulties at surgery due to a thick coating. These eyes were excluded from the histological analysis. No significant ingrowth of epithelium was seen in 15/18 (83%) and in 16/22 (73%) of the analysed areas of the glass-ceramic coated and titanium prostheses, respectively. Titanium appears to be a suitable material for the keratoprosthesis. The ingrowth of the epithelium may be hindered further by coating the titanium with bioactive glass-ceramic.     

Protein kinase A activators inhibit agonist induced prostaglandin production in human amnion

Prostaglandin (PG) production by human amnion has been postulated to have a role in the onset of labor. Previous work by ourselves and others has demonstrated that oxytocin, phorbol esters and epidermal growth factor (EGF) increase PGE2 production in human amnion cells by activation of the Phospholipase C/Protein Kinase C (PKC) cascade system. The present study was undertaken to determine the effect of prior activation of the Adenylate Cyclase cascade system upon subsequent stimulation of PGE2 production by oxytocin, phorbol 12-myristate-13-acetate (PMA) or EGF in amnion cells and membrane discs. Isoproterenol, forskolin and dibutyryl cyclic adenosine monophosphate (dbcAMP) were utilized to activate the Adenylate Cyclase system at the receptor, enzyme and second messenger level. In control amnion cells, oxytocin, PMA and EGF each provoked dose dependent increases in PGE2 production. In cells preincubated with dbcAMP, forskolin or isoproterenol, agonist stimulated PGE2 production was markedly (50-90%) inhibited (p < 0.01). Inhibition was dose dependent upon preincubator concentrations. Maximal inhibition by adenylate cyclase activators occurred with 2-4 h of preincubation. In membrane discs, forskolin preincubation also inhibited oxytocin, PMA and EGF stimulation of PGE2 production. Activation of the Adenylate Cyclase system in human amnion cells or membrane discs inhibits the subsequent action of potent stimulators of PGE2 production in human amnion.     

Adverse environmental conditions in the respiratory and medical ICU settings

Sleep deprivation and fragmentation occurring in the hospital setting may have a negative impact on the respiratory system by decreasing respiratory muscle function and ventilatory response to CO2. Sleep deprivation in a patient with respiratory failure may, therefore, impair recovery and weaning from mechanical ventilation. We postulate that light, sound, and interruption levels in a weaning unit are major factors resulting in sleep disorders and possibly circadian rhythm disruption. As an initial test of this hypothesis, we sampled interruption levels and continuously monitored light and sound levels for a minimum of seven consecutive days in a medical ICU, a multiple bed respiratory care unit (RCU) room, a single-bed RCU room, and a private room. Light levels in all areas maintained a day-night rhythm, with peak levels dependent on window orientation and shading. Peak sound levels were extremely high in all areas representing values significantly higher than those recommended by the Environmental Protection Agency as acceptable for a hospital environment. The number of sound peaks greater than 80 decibels, which may result in sleep arousals, was especially high in the intensive and respiratory care areas, but did show a day-night rhythm in all settings. Patient interruptions tended to be erratic, leaving little time for condensed sleep. We conclude that the potential for environmentally induced sleep disruption is high in all areas, but especially high in the intensive and respiratory care areas where the negative consequences may be the most severe.     

Improved method for harvesting human Schwann cells from mature peripheral nerve and expansion in vitro

The pharmacological profile of a novel dual inhibitor, tepoxalin and of its carboxylic acid metabolite on cyclooxygenase and lipoxygenase pathways was evaluated by in vitro incubation with synovial tissue. Tissue specimens obtained at surgery in rheumatoid arthritis (RA, n = 10) or osteoarthritis (OA, n = 11) patients were incubated. Tepoxalin (10(-7), 10(-6), 10(-5) M) decreased eicosanoid release calculated in % of tyrode control for OA: LTC4 to 71-33%, 6-keto-PGF1a to 37-20%, PGE2 to 29-6%. For RA: LTC4 to 56-22%, 6-keto-PGF1a to 43-22%, PGE2 to 57-32%. Similarly, its metabolite (10(-7), 10(-5)M) decreased release in OA: LTC4 to 99 and 60%, PGE2 to 42 and 20%, 6-keto-PGF1a to 54 and 25%. In RA:LTC4 to 81 and 45%, PGE2 to 61 and 30%, 6-keto-PGF1a to 46 and 18%. Significance (P < 0.05) was achieved for all but 1 group (LTC4 metabolite at 10(-7)M vs tyrode). In summary a marked and dose dependent decrease of LT and PG release was obtained when incubating the dual inhibitor tepoxalin and its active carboxylic acid metabolite with synovial tissue at doses expected to be reached in the joint during therapy.     

The Silicon Backplane Design for an LCOS Polarization-Insensitive Phase Hologram SLM

Polarization-insensitivity is achieved in a reflective spatial light modulator by laying a quarter-wave plate (QWP) at the incident wavelength directly over the mirror pixels of a silicon backplane, and forming a nematic Freedrickcz cell over the QWP to modulate the reflected phase. To achieve the highest drive voltage from the available silicon process, a switched voltage common front electrode design is described, with variable amplitude square wave drive to the pixels to maintain constant root-mean-square drive and minimize phase fluctuations during the dc balance refresh cycle. The silicon has been fabricated and liquid-crystal-on-silicon cells both with and without the QWP assembled; applications include optically transparent switches for optical networks, beam steering for add-drop multiplexers for wavelength-division-multiplexing telecommunications, television multicast, and holographic projection.