Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Principles of reference-aided decision making

A unified approach to decision making with extremal many-criteria models, expert estimates, and voting is developed on the basis of reference and distance concepts and taxonomy methods. It involves the solution of many-criteria problems with the Pareto optimum. Examples demonstrating the effectiveness and universality of the approach are given.     

All-optical phase-independent logic elements based on phase shiftinduced by coherent soliton collisions

We demonstrate, for the first time to our knowledge, that a fast coherent collision between two Kerr spatial solitons can give rise to a significant phase shift for both interacting beams. The maximal collision-induced phase shift ≈π rad takes place when the amplitudes of the solitons are equal (η₁=η₂) and the length of the interaction zone is comparable with a soliton phase period. Depending on the ratio η₂/η₁, and the collision angle between the solitons, the magnitude of the phase shift can be varied within a reasonable range, for example from 180° to 40°. The analysis of the effect performed by the finite-difference beam-propagation method has shown that it is insensitive to the initial phase difference between the incident beams (δ_i), even in the case when η ₁≠η₂. It has been demonstrated that the phenomenon can be used for all-optical three-soliton logic elements, which are capable of providing more than 3-dB signal amplification and possess bi -independent output characteristics     

The role of hydrodynamic stress on the phenotypic characteristics of single and binary biofilms of Pseudomonas fluorescens.

This study investigates the phenotype of turbulent (Re = 5,200) and laminar (Re = 2,000) flow-generated Pseudomonas fluorescens biofilms. Three P. fluorescens strains, the type strain ATCC 13525 and two strains isolated from an industrial processing plant, D3-348 and D3-350, were used throughout this study. The isolated strains were used to form single and binary biofilms. The biofilm physiology (metabolic activity, cellular density, mass, extracellular polymeric substances, structural characteristics and outer membrane proteins [OMP] expression) was compared. The results indicate that, for every situation, turbulent flow-generated biofilms were more active (p < 0.05), had more mass per cm(2) (p < 0.05), a higher cellular density (p < 0.05), distinct morphology, similar matrix proteins (p > 0.1) and identical (isolated strains -single and binary biofilms) and higher (type strain) matrix polysaccharides contents (p < 0.05) than laminar flow-generated biofilms. Flow-generated biofilms formed by the type strain revealed a considerably higher cellular density and amount of matrix polysaccharides than single and binary biofilms formed by the isolated strains (p < 0.05). Similar OMP expression was detected for the several single strains and for the binary situation, not dependent on the hydrodynamic conditions. Binary biofilms revealed an equal coexistence of the isolated strains with apparent neutral interactions. In summary, the biofilms formed by the type strain represent, apparently, the worst situation in a context of control. The results obtained clearly illustrate the importance of considering strain variation and hydrodynamics in biofilm development, and complement previous studies which have focused on physical aspects of structural and density differences.     

Features of the photoconductivity of iodine-doped cotton fibers illuminated in the fundamental absorption range

The photoelectric properties of cotton fibers treated with iodine were studied in the fundamental absorption range. The samples exhibit a sublinear illumination-current characteristic and a long-term relaxation of photoconductivity (PC) after UV irradiation (hν=5 eV) of the iodine-doped fibers. A PC mechanism is proposed which explains both the nonlinear variation of photocurrent with illumination intensity and the PC decay according to a bimolecular recombination law after UV irradiation of the iodine-doped fiber in the fundamental absorption range.     

New high-efficiency low-waste technology at the Vyksa Metallurgical Plant for operating metallurgical equipment with the use of Kompaks® monitoring systems

Introduction of the BER? KOMPAKS® automated system at the Vyksa Metallurgical Plant to safely and efficiently manage the operation of the plant’s equipment has allowed the facility to begin operating that equipment based on real-time evaluations of its actual physical condition. Introduction of the new system has also allowed better coordination of repair-scheduling with ongoing production operations, significantly improved the reliability and readiness of the equipment for operation at 100% capacity, completely eliminated the human factor from the process of monitoring the condition of equipment, and made it possible to check the quality and timeliness of equipment maintenance and repair work so as to ensure safe, efficient operation of the entire production complex.     

Hydrogen reduction kinetics of electrometallurgical slime

The interaction of hydrogen with the zinc-containing electrometallurgical slime of the Severstal’ metallurgical works has been studied. The sequence of transformations in the slime heated to 1100°C in hydrogen or air has been established. The experimental and calculated weight losses coincide. Some of the carbonates are shown to decompose in the temperature range 300–700°C, and most iron and zinc oxides are reduced to a metal. In the temperature range 650–850°C, zinc is almost completely sublimated. At temperatures above 800°C, complex oxides are reduced and calcium and magnesium carbonates and sulfates are likely to decompose. Experimental digital data on the zinc sublimation rate are processed by the least squares method with approximating equations used in thermal analysis. The kinetics of nonisothermal zinc sublimation is comprehensively analyzed using a unique procedure developed for taking into account the background of a peak and the effect of accompanying processes. An equation for the calculation of the zinc sublimation rate under experimental conditions (fluidized bed) is given and tested.