Synthesis and evaluation of tetra(2,7-octadienyl) titanate as a reactive diluent for air-drying alkyd paints

Environmental regulations are forcing the reformulation of many decorative and protective coatings systems. In particular, air-drying solventborne alkyd paints need to meet increasingly stringent emission limits and often must be reformulated with suitable exempt solvents or reactive diluents to achieve volatile organic compound (VOC) reduction. In the research summarized in this article, a new reactive diluent, tetra(2,7-octadienyl) titanate, was synthesized and evaluated in alkyd formulations for VOC reduction and property enhancement. A soy-based long-oil alkyd resin; a soy-based high-solids, long-oil alkyd resin; and a linseed-based, high-solids long-oil alkyd resin were evaluated in combination with the new reactive diluent at weight percentages ranging from 10% to 50%. Characterization included measuring viscosity, film dry times, and film performance of the reactive diluent formulations in comparison to neat alkyd resins used as control. The tetra(2,7-octadienyl) titanate formulations consistently exhibited reduced viscosities and dry times as a function of concentration. The resulting films were harder and more thoroughly cured than the control systems.     

Static fatigue of Hi-Nicalon™-S fiber at elevated temperature in air,steam, and silicic acid-saturated steam

A facility for testing SiC fiber tows in static fatigue and creep at elevated temperatures in air and steam was developed. Static fatigue of Hi-Nicalon™-S fibers was investigated at 800°C-1100°C at applied stresses between 115 and 1250 MPa in air, in Si(OH)₄(g)-saturated steam, and in unsaturated steam. Fibers tested in Si(OH)₄(g)-saturated steam and in air had silica scales throughout the test sections, but those tested in unsaturated steam did not develop scales near the steam injection point. Fiber lifetimes in static fatigue were shortest in unsaturated steam, intermediate in Si(OH)₄(g)-saturated steam, and longest in air. Failure strains did not exceed 0.3%. Steady-state strain rates and static fatigue lifetimes are modelled empirically by the Monkman-Grant relationship. Failure mechanisms are discussed.     

Impact strength and elongation‐to‐break of compatibilized ternary blends of polypropylene,nylon 66, and polystyrene

The Izod impact strength and tensile elongation‐to‐break were measured for blends of nylon 66 and polystyrene in a polypropylene matrix with and without compatibilization by an ionomer resin (for nylon 66) and a styrene‐block‐ethylene‐co‐butylene‐block‐styrene copolymer (for polystyrene). With 20% nylon 66 and 20% polystyrene, about 5% of each compatibilizer was optimal. When used together for the ternary blend, there seemed to be little gross interference (or synergism) between the compatibilizers. A comparison between binary blends suggests that what interaction does exists may be synergistic. Polym. Eng. Sci. 44:1800–1809, 2004. © 2004 Society of Plastics Engineers.     

Properties of diamond-like carbon

This paper revies the preparation and properties of hard forms of amorphous carbon and hydrogenated amorphous carbon, often known as diamond-like carbon. Properties such as the hydrogen content, sp³ content, optical gap, refractive index, hardness, elastic modulus and friction and their dependence on the deposition conditions are described. Models of the electronic structure and mechanical properties are used to relate the physical properties to the atomic structure.     

Hydrogen-induced intergranular failure in nickel revisited

Using a combination of high-resolution scanning and transmission electron microscopy, the basic mechanisms of hydrogen-induced intergranular fracture in nickel have been revisited. Focused-ion beam machining was employed to extract samples from the fracture surface to enable the examination of the microstructure immediately beneath it. Evidence for slip on multiple slip systems was evident on the fracture surface; immediately beneath it, an extensive dislocation substructure exists. These observations raise interesting questions about the role of plasticity in establishing the conditions for hydrogen-induced crack initiation and propagation along a grain boundary. The mechanisms of hydrogen embrittlement are re-examined in light of these new results.     

Physical aging behavior of miscible blends containing atactic polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)

The influence of blend composition on physical aging behavior was assessed for miscible blends of atactic polystyrene (a-PS) and poly(2,6-dimethyl-1,4-phenylene oxide) (PPO). At aging temperatures of 15 and 30°C below the midpoint glass transition temperature (T_g), the a-PS/PPO blends exhibited volume relaxation rates that were retarded compared to additivity based upon the aging rates for pure a-PS and PPO. This negative deviation diminished with increased undercooling, and eventually the volume relaxation rates displayed a nearly linear trend with respect to composition at the greatest undercooling of 60°C that was employed. The compositional nature of unaged glassy density and secondary relaxation intensity, both influenced by the presence of specific attractive interactions in the blend system, were likely causes for the variation of volume relaxation rate with composition and undercooling. For aging at 30°C below T_g, the dependence of enthalpy relaxation rate on composition was similar to that observed for volume relaxation. Mechanical aging rates determined from time–aging time superposition of creep compliance data showed significantly less than additive behavior for the blends aged at T_g−30°C, but unlike the volume relaxation results, this trend persisted at the 60°C undercooling.     

Melatonin for Neonatal Encephalopathy: From Bench to Bedside

Neonatal encephalopathy is a leading cause of morbidity and mortality worldwide. Although therapeutic hypothermia (HT) is now standard practice in most neonatal intensive care units in high resource settings, some infants still develop long-term adverse neurological sequelae. In low resource settings, HT may not be safe or efficacious. Therefore, additional neuroprotective interventions are urgently needed. Melatonin’s diverse neuroprotective properties include antioxidant, anti-inflammatory, and anti-apoptotic effects. Its strong safety profile and compelling preclinical data suggests that melatonin is a promising agent to improve the outcomes of infants with NE. Over the past decade, the safety and efficacy of melatonin to augment HT has been studied in the neonatal piglet model of perinatal asphyxia. From this model, we have observed that the neuroprotective effects of melatonin are time-critical and dose dependent. Therapeutic melatonin levels are likely to be 15–30 mg/L and for optimal effect, these need to be achieved within the first 2–3 h after birth. This review summarises the neuroprotective properties of melatonin, the key findings from the piglet and other animal studies to date, and the challenges we face to translate melatonin from bench to bedside.     

APPLICATION OF PETROLEUM DEMULSIFICATION TECHNOLOGY TO SHALE OIL EMULSIONS

ABSTRACT

Demulsification, the process of emulsion separation, of water-in-oil shale oil emulsions produced by several methods was accomplished using commercial chemical demulsifiers which are used typically for petroleum demulsification. The shale oil emulsions were produced from Green River shale by one in situ and three different above-ground retorts, an in situ high pressure/ high temperature steam process, and by washing both re tort-produced and hydrotreated shale oils.