Multiferroic Consequence of Porous (BiFeO_3)_x–(BiCrO_3)_(1-x) Composite Thin Films by Novel Sol–Gel Method

In this work, we have presented a spin-coating method to produce thin films started with pure BiCrO_3(BCO) and ended up with BiFeO_3(BFO) by increasing x values in the(BiFeO_3)_x–(BiCrO_3)_(1-x)composites. All the produced thin films have been crystallized at the annealing temperatures of 400 °C for 0.5 h. The XRD and EDAX spectrums give insight that the two crystal phases related to BCO and BFO stayed together within the thin film matrices. SEM analysis showed that the prepared composite had macroporous morphology with interconnected pores and its width(size) decreased with increasing x values. The strong correlations are observed among the microstructure, dielectric, ferroelectric, ferromagnetic properties and Fe concentration. Among all composites, the composition of 0.75 shows an attractive magnetization, polarization, switching and improved dielectric behaviors at room temperature. Significant increase in the multiferroic characteristics of 0.75 composition is due to arise of lower leakage current by causing reduction in oxygen vacancy density, and enhancement of super-exchange magnetic interaction between Fe~(3+) and Cr~(3+) at BFO/BCO interface layers. Our result shows that the thin layer on Pt(111)/Ti/SiO_2/Si substrate possesses simultaneously improved ferroelectric and ferromagnetic properties which make an inaccessible potential application for nonvolatile ferroelectric memories.     

The induced damage in the hepatopancreas of Orchestia species after exposure to a mixture of Cu/Zn—An ultrastructural study

The hepatopancreas of crustaceans species has been recognized as an essential target organ to assess trace elements' effects. Due to its dynamic and capability of detoxifying trace metal, this organ often indicates distinct pathological disturbances. In the present work, we intend to evaluate the bioaccumulation of trace metal in three Orchestia species (Orchestia montagui, Orchestia gammarellus, and Orchestia mediterranea) living in symmetry in the banks of Bizerte lagoon (37°13′8″N 09°55′1″E) after their exposure during 14 days to a mixture of copper and zinc, and to highlight the effect of these metals on their hepatopancreas ultrastructure using transmission electron microscopy. At the end of the experiment, results showed that the mortality and the body mass varied according to the used nominal concentrations. Significant alterations were noted in all the treatment groups. The degree of these alterations depends on the used concentration, and they are represented especially by the cells remoteness and the border lyses, the reduction of the nuclear volume, the increase in the cytoplasm density with the presence of trace metal in the nucleus as well as in the vacuole, the disorganization and the destruction of microvilli, the condensation of the majority of cellular organelles and mitochondria swelling. Through this study, Orchestia genus could be an attractive candidate for the biochemical study of trace metal toxicity in Tunisian wetlands.     

Thermal Reactivity of Double-Base Rocket Propellants

Thermal decomposition studies on double-base propellants have been carried out in air and vacuum using differential scanning calorimetric, thermogravimetric and mass spectrometric techniques. Low temperature (90 °C–170 °C) decomposition seems to involve diffusion controlled process, the mechanism in air and vacuum being different. High temperature (170 °–205 °C) decomposition involves bond breakage.     

Structural,optical and magnetic properties of nanocrystalline Zn0.9Co0.1O-based diluted magnetic semiconductors

With a view to understand the influence of nano size on various properties of cobalt-doped ZnO-based diluted magnetic semiconductors, a series of materials were prepared by the citrate gel route. The phase and morphology studies have been carried out by X-ray diffraction and transmission electron microscopy, respectively. All the samples of the present investigation are found to have hexagonal wurtzite structure and crystallite sizes are found to vary from 25 nm to 65 nm. From the optical absorption measurements it has been observed that upon doping with cobalt, the energy band gap is found to shift towards lower energy side (red shift) while it shifts towards higher energy side (blue shift) when the crystallite size is increased continuously. It has been observed from the XPS results that oxidation state of Cobalt is +2 and that the difference in binding energies of Co 2p_3/2 and Co 2p_1/2 is found to increase continuously with increasing crystallite size. Finally, all the samples are found to exhibit room temperature ferromagnetism and the specific magnetization decreases with increasing crystallite size.     

Tribometrology of Skin

The quantitative assessment of both skin health and skin care products is suggested based on skin tribological properties. Simultaneous multi-sensor measurements of both coefficient of friction and contact electrical impedance allow for fast and quantitative evaluation of skin conditions such as dryness and moisturization, and early diagnosis of skin diseases or of the deterioration in skin functions at a stage that may not be easily discernable visibly. It may be instrumental in developing and testing skin cosmetics and medicine.     

A new strain hardening model for rate-dependent crystal plasticity

This paper presents a crystal plasticity based finite element analysis employing the new microstructure-based strain hardening model recently presented by Saimoto and Van Houtte (2011) [7] to simulate formability and texture evolution in the commercial aluminum alloy 5754. Simulations are performed to compare the predictive capability of the new hardening model against the common work hardening models using a rate-dependent plasticity formulation. The parameters in the numerical models are calibrated using the X-ray data published by Iadicola et al. (2008) [9] for the aluminum sheet alloy 5754. The predictions of the model for balanced biaxial tension and in-plane plane-strain tests are compared against experimental observations presented in Iadicola et al. (2008) [9]. It is concluded that the new model provides the best predictions of the large strain behavior of Aluminum sheet alloy 5754 subjected to various strain paths.     

迎向更环保的明天：半导体让汽车更环保

低价位新车打入印度汽车市场，印度的汽车总数将于2012年超过4000万辆。空气质量已成为印度政府关注的首要课题，而针对省油引擎管理系统的重要性，     

Microstructural Aspects of Damage and Fracture in AZ31 Sheet Materials

There are considerable data in the literature dealing with deformation mechanisms in AZ31 sheets. However, there is little information on the damage and fracture processes in this material. In this contribution, digital image correlation is used to follow deformation patterns occurring during tensile and v-bending tests at room temperature. A variety of surface analysis techniques and three-dimensional x-ray tomography have been used to examine the relationship between deformation, damage initiation, and the final fracture processes. The results show that premature diffuse necking occurs in the tensile tests without transit into localized necking. Deformation twins cluster by an autocatalytic process to form shear bands serving as preferential sites for strain localization and crack initiation. Damage appears in the form of microcracks within the shear bands at a late stage of necking and lead to the final fracture. The presence and the distribution of second-phase particles and their distributions help accelerate the final fracture processes.     

Comparison of deformation induced precipitation behaviour in Alloy 718 under two microstructural conditions

Alloy 718 samples under two initial microstructural conditions, viz., solution annealed to form only γ phase (ST) and aged to precipitate only δ particles (DELTA), were deformed in tension till fracture in the temperatures range from 200°C–700°C. From the comparison of the evolved microstructure of deformed and undeformed specimens that have been subjected to similar thermal history, deformation induced precipitation could be identified. Deformation in the range of 550°C to 650°C promoted the precipitation of γ′ and γ″ phases in both structures. In case of DELTA alloy, the γ′ precipitation was found to precede the γ′ phase precipitation while no such preference for precipitation could be identified in ST specimens. This difference in the precipitation behaviour and the sequence of precipitation has been explained on the basis of the relative concentration of solutes in the matrix of the starting microstructures of ST and DELTA specimens.     

Smart utilization of renewable energy sources in a microgrid system integrated with plug‐in hybrid electric vehicles

Mass roll‐out of plug‐in hybrid electric vehicles (PHEVs) and significant penetration of renewable energy sources in distribution system play a major role in delivering low carbon environment. However, placing and utilizing these units randomly result in overloading, increased power loss, and reduced voltage profile. This paper responds to these technical challenges by using a strategic placement method for locating the distributed generation (DG) and the charging station (CS) of PHEVs in a multi‐zone distribution system. For simultaneously scheduling of these units in each zone, the smart energy management framework is proposed in this paper. Apart from usual energy management constraints, this paper also incorporates the real‐time constraints involving the capacity of PHEV batteries, the mobility pattern, and the power level of the charging infrastructure. The simulation studies are carried out for each hour of a day. To cope with this time constraint execution, particle swarm optimization algorithm‐based approach is used. The proposed framework is tested in IEEE 33 and IEEE 69 bus radial distribution system. The obtained results imply that the presented energy management framework provides maximum profits for the vehicle owner, and meanwhile it fulfills preferences of the user in each zone simultaneously.