Microstructural Aspects of Damage and Fracture in AZ31 Sheet Materials

There are considerable data in the literature dealing with deformation mechanisms in AZ31 sheets. However, there is little information on the damage and fracture processes in this material. In this contribution, digital image correlation is used to follow deformation patterns occurring during tensile and v-bending tests at room temperature. A variety of surface analysis techniques and three-dimensional x-ray tomography have been used to examine the relationship between deformation, damage initiation, and the final fracture processes. The results show that premature diffuse necking occurs in the tensile tests without transit into localized necking. Deformation twins cluster by an autocatalytic process to form shear bands serving as preferential sites for strain localization and crack initiation. Damage appears in the form of microcracks within the shear bands at a late stage of necking and lead to the final fracture. The presence and the distribution of second-phase particles and their distributions help accelerate the final fracture processes.     

Comparison of deformation induced precipitation behaviour in Alloy 718 under two microstructural conditions

Alloy 718 samples under two initial microstructural conditions, viz., solution annealed to form only γ phase (ST) and aged to precipitate only δ particles (DELTA), were deformed in tension till fracture in the temperatures range from 200°C–700°C. From the comparison of the evolved microstructure of deformed and undeformed specimens that have been subjected to similar thermal history, deformation induced precipitation could be identified. Deformation in the range of 550°C to 650°C promoted the precipitation of γ′ and γ″ phases in both structures. In case of DELTA alloy, the γ′ precipitation was found to precede the γ′ phase precipitation while no such preference for precipitation could be identified in ST specimens. This difference in the precipitation behaviour and the sequence of precipitation has been explained on the basis of the relative concentration of solutes in the matrix of the starting microstructures of ST and DELTA specimens.     

Smart utilization of renewable energy sources in a microgrid system integrated with plug‐in hybrid electric vehicles

Mass roll‐out of plug‐in hybrid electric vehicles (PHEVs) and significant penetration of renewable energy sources in distribution system play a major role in delivering low carbon environment. However, placing and utilizing these units randomly result in overloading, increased power loss, and reduced voltage profile. This paper responds to these technical challenges by using a strategic placement method for locating the distributed generation (DG) and the charging station (CS) of PHEVs in a multi‐zone distribution system. For simultaneously scheduling of these units in each zone, the smart energy management framework is proposed in this paper. Apart from usual energy management constraints, this paper also incorporates the real‐time constraints involving the capacity of PHEV batteries, the mobility pattern, and the power level of the charging infrastructure. The simulation studies are carried out for each hour of a day. To cope with this time constraint execution, particle swarm optimization algorithm‐based approach is used. The proposed framework is tested in IEEE 33 and IEEE 69 bus radial distribution system. The obtained results imply that the presented energy management framework provides maximum profits for the vehicle owner, and meanwhile it fulfills preferences of the user in each zone simultaneously.     

Response of Materials During Sliding on Various Surface Textures

In the present investigation, soft materials, such as Al-4Mg alloy, high-purity Al and pure Mg pins were slid against hard steel plates of various surface textures to study the response of materials during sliding. The experiments were conducted using an inclined pin-on-plate sliding apparatus under both dry and lubricated conditions in an ambient environment. Two kinds of frictional response, namely steady-state and stick-slip, were observed during sliding. In general, the response was dependent on material pair, normal load, lubrication, and surface texture of the harder material. More specifically, for the case of Al-4Mg alloy, the stick-slip response was absent under both dry and lubricated conditions. For Al, stick-slip was observed only under lubricated conditions. For the case of Mg, the stick-slip response was seen under both dry and lubricated conditions. Further, it was observed that the amplitude of stick-slip motion primarily depends on the plowing component of friction. The plowing component of friction was the highest for the surfaces that promoted plane strain conditions and was the lowest for the surfaces that promoted plane stress conditions near the surface.     

Fluorimetric Nerve Gas Sensing Based on Pyrene Imines Incorporated into Films and Sub‐Micrometer Fibers

The chemical sensing of nerve gas agents has become an increasingly important goal due to the 1995 terrorist attack in a Tokyo subway as well as national security concerns in regard to world affairs. Chemical detection needs to be sensitive and selective while being facile, portable, and timely. In this paper, a sensing approach using a pyrene imine molecule is presented that is fluorimetric in response. The detection of a chloro‐Sarin surrogate is measured at 5 ppmv in less than 1 second and is highly selective towards halogenated organophosphates. The pyrene imine molecule is incorporated into polystyrene films as well as micrometer and sub‐micrometer fibers. Using both a direct drawing approach and electrospinning, micrometer and nanofibers can be easily manufactured. Applications for functional sensing micrometer and nanofibers are envisioned for optical devices and photonics in addition to solution and airflow sensing devices.     

X-ray diffraction and H-storage in ultra-small palladium particles

In situ X-ray diffraction (XRD) and gravimetric hydrogen uptake measurements of d ∼ 2–3 nm spherical PdH_x particles have been studied in the temperature and pressure range of 323 < T < 428 K and 0 < P < 10 bar. The Pd particles were protected from sintering with a hydrogen-permeable carbon coating. While only containing ∼300–1000 atoms, the Pd particles were found to exhibit the same fcc structure and lattice constant as the bulk. Our isothermal studies show that, with increasing x, these highly crystalline PdH_x nanoparticles also exhibit a complete transformation from the dilute α solid solution phase to the more concentrated β hydride phase. However, we observed that the character of the α–β phase transition in these nanoparticles is very different from that in the bulk. Indeed, the hydrogen uptake isotherm exhibits a noticeable positive slope in the α + β co-existence region. Furthermore, we also observed a noticeable narrowing of the α + β co-existence region (δx) in the nanoparticles. Also, a significant suppression of the critical temperature T_c for the phase boundary was observed: T_c(nano) ≈ 430 K while T_c(bulk) ≈ 570 K. These results signal a significant change in the thermodynamic behavior of very small hydride nanoparticles that may be common to many other nano-scale metal hydride systems as well.     

Nonliposomal approach--a study of preparation of egg albumin nanospheres containing amphotericin-B

The stability of liposomes after introduction into the body is presently being discussed and needs thorough understanding. Hence, as a nonliposomal approach, egg albumin nanospheres were prepared by the pH-coacervation method, and a preliminary study was carried out of the influence of process variables on the size and shape of nanospheres by changing the pH of the albumin solution, concentration of albumin solution, and volume of cross-linking agent. The batch prepared with an albumin medium of pH 9, 2% concentration, and 100 μl of 4% glutaraldehyde-ethanol solution was found to have a spherical uniform shape with an average size of 497.6 nm. The ideal batch was loaded with the systemic antifungal drug amphotericin-B. Drug-loaded nanospheres were evaluated to study their in vitro release. They were found to exhibit a biphasic pattern with a cumulative percentage release of 97.7%.     

Effect of ash on maximum thickness of plastic layer of coals

A study of the effect of ash yield on the maximum thickness of the plastic layer (MTPL) of some coking coals (as measured by the Sapozhnikov plastometer) has revealed that with an increase in the former the latter in general decre?es. A rectilinear relation approximately exists between the ash percentage (dry basis) and log MTPL values of coals. For the samples studied, a multiple correlation incorporating the rank factor was found to be unnecessary. Higher Fe₂O₃ and SO₃ contents from the coal were found to be associated with higher MTPL values.     

Polarization-based compensation of astigmatism

One approach to aberration compensation of an imaging system is to introduce a suitable phase mask at the aperture plane of an imaging system. We utilize this principle for the compensation of astigmatism. A suitable polarization mask used on the aperture plane together with a polarizer-retarder combination at the input of the imaging system provides the compensating polarization-induced phase steps at different quadrants of the apertures masked by different polarizers. The aberrant phase can be considerably compensated by the proper choice of a polarization mask and suitable selection of the polarization parameters involved. The results presented here bear out our theoretical expectation.     

Green synthesis and antimicrobial activity of silver nanoparticles using wild medicinal mushroom Ganoderma applanatum (Pers.) Pat. from Similipal Biosphere Reserve,Odisha, India

In the present study, green synthesis and cost effective approach of silver nanoparticles using wild medicinal mushroom Ganoderma applanatum (Pers.) Pat. from Similipal Biosphere Reserve, Odisha, India is reported. The biosynthesised AgNPs were characterised using UV‐visible spectroscopy, particle analyser and scanning electron microscopy studies. It was found by dynamic light scattering analysis, that the average size and charges of the AgNPs were 133.0 ± 0.361 nm and −6.01 ± 5.30 mV, respectively. Moreover, the Fourier transform infrared study was also conducted to identify the biomolecules or functional groups responsible for the reduction of Ag and stabilisation of the AgNPs. The potential biomedical application with reference to antimicrobial activity of the synthesised AgNPs was investigated against some pathogenic microorganisms viz. Escherichia coli, Bacillus subtilis, Staphylococcus epidermidis, Vibrio cholerae, Staphylococcus aureus and Shigella flexneri.Inspec keywords: antibacterial activity, biomedical materials, nanomedicine, nanofabrication, materials preparation, ultraviolet spectra, visible spectra, scanning electron microscopy, Fourier transform infrared spectra, molecular biophysics, reduction (chemical), biochemistry, microorganisms, silver, nanoparticlesOther keywords: green synthesis, antimicrobial activity, silver nanoparticles, wild medicinal mushroom, Ganoderma applanatum Pat, Similipal Biosphere Reserve, Odisha, UV‐visible spectroscopy, particle analyser, scanning electron microscopy, dynamic light scattering analysis, Fourier transform infrared study, biomolecules, functional groups, silver reduction, AgNP stabilisation, biomedical application, pathogenic microorganisms, Escherichia coli, Bacillus subtilis, Staphylococcus epidermidis, Vibrio cholerae, Staphylococcus aureus, Shigella flexneri, Ag

Abbreviations

AgNPs

‐ Silver Nanoparticles

SPR

‐Surface plasmon resonance

AgNO3

‐Silver nitrate

nm

‐ Nanometer

mm

‐Milimetre