High-pressure fluidized bed coating utilizing supercritical carbon dioxide

Various particles with sizes between 100 and 200 μm were encapsulated with waxes commonly used in technical coating applications. For this, a homogeneous mixture of molten paraffin and supercritical carbon dioxide was prepared in an autoclave and injected into the high-pressure fluidized bed through a nozzle from the bottom. Due to the different conditions in the mixing autoclave and the fluidized bed, the paraffin precipitated in the vicinity of the nozzle and adhered to the solid particles. A complete, thin, uniform, and solvent-free coating was produced. The use of two paraffins with different alkane compositions resulted in dissimilar spreads on glass beads due to their different glass transition temperatures. A smaller pressure drop across the nozzle led to more uniform and even coatings. Glass beads, ceramic spheres, potassium chloride, and lactose showed similar coating results, whereas different morphologies were observed with a plastic material, characterized by a rougher surface and a lower surface energy. The high quality of the coating was confirmed by standard dissolution tests with coated potassium chloride crystals and lactose agglomerates.     

Function of sulfur dioxide in the kinetic mechanism of oxidation of carbon

Retardation of the gasification reaction of carbon with oxygen by SO₂ was observed. Rates of oxidation were determined by thermal gravimetric analysis (TGA) of a nuclear graphite in the temperature range of 550–700°C, and of a coconut charcoal in the temperature range of 400–505°C. The oxidant gases were dry air containing 0–6% SO₂. Reduction of the rate by SO₂ varied with burn-off. Differential thermal analysis (DTA) was also applied to detect the retardation effect of SO₂. The technique of infrared internal reflection spectroscopy (IRS) was used to examine the surface species of reacted charcoal samples. Absorption bands were assigned to surface carbonyls, lactones, and a chemisorbed SO₂ in the form of sulfate. Chemisorption of SO₂ was attributed to cause the retardation of the oxidation reaction.     

The Effects of Experience and Strategy on Visual Attention Allocation in an Automated Multiple-Task Environment

Operators and users interacting with computer environments often have to deal with multiple tasks at once, responding to each in series. Diagnostic automation, that is, automation that alerts users when and where to look, has been suggested to support the unique challenges of multiple task environments: activating tasks, switching between tasks, and tasks interfering with each other. Automation is not always reliable, however. Because of the common interaction with novel systems and the importance of training, the Simultaneous Task Environment Platform program—a multiple-task environment—was developed to understand the effects of experience on interaction with these automation-supported systems, as well as what strategies were developed. It was found that participants became more efficient with experience only when they interacted with higher reliability automation. Furthermore, the strategies participants developed focused on the differences between tasks and patterns across those tasks. Automated systems training should be sure to employ these findings.     

Effects of mite resistance mechanism of geraniums on mortality and behavior of foxglove aphid (Acyrthosiphon solani Kaltenbach)

Geraniums (Pelargonium xhortorum Bailey) possess a pest-resistance mechanism, based on glandular trichomes and the exudate they produce, that has been shown to be effective against the two-spotted spider mite (Tetranychus urticae Koch). Using an intact plant bioassay, the effectiveness of the resistance mechanism was determined for another potential pest, the foxglove aphid (Acyrthosiphon solani Kaltenbach). Comparisons were made between plant lines previously analyzed for their degree of resistance to mites, as well as their glandular trichome density and trichome exudate production. Over 100 aphid adults were bioassayed on each of the five plant lines used in the experiment. In addition to adult aphid survival, the production and survival of nymphs was determined in this bioassay. The results indicate that plant lines that are resistant to the two-spotted spider mite are also resistant to the foxglove aphid, while lines susceptible to mites are susceptible to the aphids. To evaluate the physical impediment features of the trichome exudate, the behavior of foxglove aphid nymphs was compared on two geranium lines, one a resistant line with high trichome densities and large quantities of exudate and the second a susceptible line with few trichomes and reduced exudate. A third leaf surface type was produced by washing the exudate from resistant leaves using a mildly basic buffer solution prior to the bioassay. Aphid behavior was divided into five categories: feeding or probing, resting, wandering, struggling, and immobilized. On both susceptible leaves and resistant leaves from which the exudate had been removed by washing, the aphids settled quickly and were observed with inserted stylets during most of the observation intervals. In contrast, aphids on the unwashed resistant leaf surfaces often became ensnared in the sticky trichome exudate and had difficulty in settling to probe the leaf. Physical entrapment by glandular trichome exudate appears to be an important aspect of aphid resistance in geraniums.     

A comparison of pyrrolidide and picolinyl ester derivatives for the identification of fatty acids in natural samples by gas chromatography-mass spectrometry

The pyrrolidide and picolinyl ester derivatives of the fatty acids in two natural lipid samples rich in unsaturated fatty acids, pig testis lipids and cod liver oil were satisfactorily resolved on capillary columns of fused silica coated with stationary phases of varying polarity. The picolinyl esters, in particular, when subjected to gas chromatography-mass spectrometry on a column containing a cross-linked methyl silicone, gave distinctive mass spectra, which could be interpreted in terms of both the numbers and positions of the double bonds.     

Pressureless low temperature sintering of nanocrystalline zirconia ceramics via dry powder processing

Pressureless sintering approaches provide a simple avenue to manufacture dense ceramic parts with minimal processing equipment, but current pressureless sintering techniques have yet to demonstrate capabilities of producing dense ceramics while maintaining sub-50 nm grain sizes. Nanocrystalline yttria stablized zirconia ceramics were process from 4 mol% yttria stablized zirconia (4YSZ) nanopowders with a crystallite size of 7.5 nm using dry cold isostatic pressing (CIP) where powders are dried immediately prior to green compact formation and CIP vacuum bagging. It is shown that CIP pressures >75 000 psi (517 MPa) effectively remove pores larger than 100 nm and that pressureless sintering occurs at reduced temperatures for green densities ≥50%. Though the sintering kinetics are shown to be similar to other zirconia nanopowder sintering studies, the small initial crystallize size and reduced sintering temperature allowed densities as high as 97.2%, while retaining a ceramic grain size at or below 40 nm. Produced nanocrystalline 4YSZ ceramics with a grain size of 30.3 nm and a density of 96.3% had Vicker's hardnesses as high as 14.2 GPa and Vicker's indentation fracture resistance of 3.43 MPa·, demonstrating that simple processing approaches can be refined to fabricate nanocrystalline ceramics while maintaining high hardness and indentation fracture resistance.     

Aerodynamics and aerosol particle deaggregation phenomena in model oral-pharyngeal cavities

The results of numerical simulations of the aerodynamics and of solid aerosol deaggregation phenomena arising in the process of airflow through various model human oropharyngeal cavities are reported. Special attention is given to the relevance of these simulations to the inhalation of dry-powder therapeutic aerosols. Several two- and three-dimensional mouth and throat geometries (terminating just beyond the larynx) are considered. Cross-sectional area-averaged viscous stress values are numerically determined as a function of distance from the mouth opening. These values, ranging from approximately 10 to 500 dyn cm⁻², are compared with estimates of Van der Waals attractive forces per unit area of particle-particle contact so as to evaluate the ability of the flowing airstream to deaggregate aerosol particles that enter the mouth in an aggregated state (held together principally by Van der Waals attractive forces). Estimates of airstream viscous stress differ markedly depending on whether the geometry is two- or three-dimensional. Quantitative differences between flow in a 90°-bend model and an oropharyngeal geometry numerically reconstructed from a cast of a human mouth and throat are especially significant in regards to the ability of the airstream to break apart particle agglomerates. For all geometries it is observed that increasingly smaller particle agglomerates may potentially be separated as the airflow rate increases from 30 to 2001 min⁻¹. At the highest airflows, aggregated particles of diameter near to or even below 1 μm may potentially be separated by the airflow. If separation of particle agglomerates is to occur, it appears far more likely to take place in the throat than in the mouth. This is especially apparent for the more physiologically faithful oropharyngeal geometries considered.     

Synergistic toughening and electrical functionalization of an epoxy using MWCNTs and silane- /plasma-activated basalt fibers

This work studied the effects of adding short basalt fibers (BFs) and multi-walled carbon nanotubes (MWCNTs), both separately and in combination, on the mechanical properties, fracture toughness, and electrical conductivity of an epoxy polymer. The surfaces of the short BFs were either treated using a silane coupling agent or further functionalized by atmospheric plasma to enhance the adhesion between the BFs and the epoxy. The results of a single fiber fragmentation test demonstrated a significantly improved BF/epoxy adhesion upon applying the plasma treatment to the BFs. This resulted in better mechanical properties and fracture toughness of the composites containing the plasma-activated BFs. The improved BF/epoxy adhesion also affected the hybrid toughening performance of the BFs and MWCNTs. In particular, synergistic toughening effects were observed when the plasma-activated BFs/MWCNTs hybrid modifiers were used, while only additive toughening effects occurred for the silane-sized BFs/MWCNTs hybrid modifiers. This work demonstrated a potential to develop strong, tough, and electrically conductive epoxy composites by adding hybrid BF/MWCNT modifiers.