Correlations Among Signatures for Detection of Different Types of Fires

One way of overcoming the problem of false alarms encountered in a single parameter detection system due to non-fire stimulii is the simultaneous use of multiple signatures. Researchers have found significant benefits of multi-sensor detection in reducing false triggering. Appreciable interest has been expressed in using carbon monoxide (CO) or carbon dioxide (CO₂) gas sensors in combination with smoke sensors. The present study has been carried out to determine the correlation and inter-dependence between two different fire signatures like CO–OD (optical density), CO–CO₂, CO₂–OD. The signatures have been investigated using experimental measurements of a fire inside a closed compartment measuring 7 x 7 x 4.2 m. A range of fuels are used, and both smouldering and flaming combustion are examined. Attempts have been made to examine whether correlation coefficients between two signatures can form a basis of detection and be exploited as one of the components in multi- criteria fire detection algorithm. The CO/CO₂ ratio as a criterion for detector operation has also been examined and discussed in the light of existing literature and codal provisions.     

Knowledge formation and learning in the management of projects: A problem solving perspective

In contrast to traditional projects, which are assumed to be fully specified and then executed with little learning anticipated, complex projects cannot be fully specified at the outset and require continuous learning over their life cycles. Nevertheless, the key role of knowledge formation and learning in managing complex projects is under-developed for expanding project capability boundaries to include knowledge uncertainty and indeterminacy.     

Intensification of nonlinearity by dispersed events in media with structure and generation of various dominant frequencies in P- and S-waves

A model of a continuum with a structure described by infinite order equations of motion is proposed. In case that a wave is very long as compared with the size of the structure, equations are reduced to the fourth-order equations. A closed equation of motion, including nonlinear, dispersed and wave members, is derived. It is shown that solutions in the form of soliton waves exist only in media where wave velocity grows with pressure. In the media, where soliton waves do not exist, quasi-stationary solutions with multiple frequencies prevail. It is found that the nonlinear effect of multiple frequencies is unexpectedly high even for small deformation as dispersion violently intensifies nonlinear events. Moreover, in the domain of small deformation, there exist solutions for longitudinal and transversal waves with the same length and different frequencies. The solutions for the same length waves with different frequencies most often occur in seismology and seismic explorations.     

Microstructure-Based Estimation of Strength and Ductility Distributions for $$\alpha +\beta $$ Titanium Alloys

Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.

     

Microstructural Features of Low-Alloy Pipeline Steels that Determine Impact Strength of Welded Joint Heat-Affected Zone

Metallurgist - Microstructural mechanisms reducing the impact strength values of a coarse grained heat-affected zone are studied for two K60 microalloyed steels. Research is conducted on specimens...     

Power Supply at Metallurgical Iron-and-Steel Works: Features and Development Prospects

Metallurgist - The article provides a brief assessment of the current state of power supply units at metallurgical plants and prospects for their future development. The principal power-supply...     

Cerium Effect on the Phase Composition and Crystallization Behavior of Aluminum Casting Alloys Based on the Al–Mg–Si System

Russian Journal of Non-Ferrous Metals - Using a Thermo-Calc software package (TCAl4.0 database), unexplored data concerning the phase composition and crystallization behavior of...     

Production of Powdered α-Fe2O3 with Multilevel Gradient Porosity

Russian Journal of Non-Ferrous Metals - This article discusses methods for producing a material with gradient multilevel porosity by sintering layer-by-layer distributed α-Fe2O3 nanopowders...     

BRE low-energy-house laboratories—examples of the use of heat Pumps

The low-energy-house laboratories at the Building Research Station incorporate various techniques for reducing energy consumption for space and water heating. They have been built to high standards of insulation, but the main experimental features concern the eight heat pumps. most of which have been purpose designed for their particular applications. In this paper the houses and their heating systems are described briefly and. whilst these are only experiments, it is expected that some may indicate cost-effective ways in which heat pumps may be employed in both new and existing construction in the future.     

Lead and cadmium in teeth,bone and kidneys of rats with a standard Pb‐Cd supply

Male Wistar rats received a combination of 25 ppm PbCl₂ and 5 ppm CdCl₂ in drinking water at different developmental stages. Pb and Cd levels of incisors, molars, epiphyses, diaphyses and kidney cortex were recorded by atomic absorption spectrophotometry. The results confirmed that Pb has an affinity for hard tissue and especially to teeth, but it also accumulated in soft tissues under the above conditions. In addition, the results indicated none or only a moderate placental or mammary barrier for Pb, and suggested a high absorption of lead from the intestine of sucklings. The results also confirmed that kidney cortex is a primary target for Cd, and indicated that Cd has crossed the placental and mammary barriers to some degree. The positive significant correlation between Cd levels in molars and kidney cortex suggested that rodent molars indicate a degree of Cd absorption, whereas incisors do not. It is supposed that rodent molars are comparable to human deciduous teeth. It is thus confirmed that human deciduous teeth indicate previous lead exposure. It is further inferred that they also can be used as indicators of previous Cd‐exposures.