Synthesis and characterization of electrically conducting copolymer of aniline and o‐bromoaniline using methane sulfonic acid as dopant

Polyaniline (PAN), poly(o‐bromoaniline) (POBA), and poly(aniline‐co‐o‐bromoaniline) (PABA) were synthesized by oxidative coupling. These polymers are protonated by 10–20% methane sulfonic acid (MSA) and 1M HCl. The new polymer bases have greater solubility than that of PAN in common polar organic solvents; PAN–MSA was observed to be the most thermally stable of these polymers. POBA is associated with residual quinoid diimine units as illustrated in the IR and UV‐vis spectra, after reduction with hydrazine dihydrochloride. Both the doping agents cause a downward shift of the quinoid absorption in the IR spectra. MSA‐ and HCl‐doped PAN and PABA polymers exhibit a coil‐like conformation in DMSO, whereas only MSA‐doped PAN and PABA show an “expanded coil‐like” conformation in m‐cresol with a “free carrier tail” above 800 nm in their electronic spectra. XPS spectra indicated the presence of covalent bromine in the POBA and PABA polymers. Bromine retention was greater in the homopolymer as evidenced by the IR studies after aging at 350°C. Compared to HCl, MSA is found to be a more effective dopant, enhancing the conductivity of the copolymers by 10²–10³ times in magnitude. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2662–2669, 2002     

Measurement of Activity Coefficients from Unsteady State Evaporation and Growth of Microdroplets

Techniques are presented for determination of activity coefficients of binary systems from unsteady state evaporation and growth of single microdroplets in controlled environments. A high-precision light scattering method based on resonances observed in light scattering by microdroplets was used to determine the size and composition of a microdroplet as functions of time. The techniques were validated through data on growth of glycerol microdroplets in slowly developing water vapor concentration fields and evaporation of microdroplets, containing volatile dimethylphthalate (DMP) and nonvolatile dioctylphthalate (DOP), in vapor-free atmospheres. When the water vapor concentration in the surrounding gas changes slowly a glycerol droplet maintains a dynamic equilibrium with the water vapor; thus the activity coefficient of water was determined from knowledge of the droplet composition and the water vapor saturation ratio in the gas phase. The activity coefficients of DMP were determined on the basis that the instantaneous evaporation rate of a DMP-DOP microdroplet in a vapor-free atmosphere is equal to the product of the activity of DMP and the evaporation rate of a pure DMP droplet. The activity coefficient values obtained from microdroplet experiments are highly reproducible and agree with data available in the literature.     

High-Toughness Silicon Carbide as Armor

Silicon carbide, with single-edge precracked beam (SEPB) toughness greater than 7 MPa·m^1/2, was made by hot-pressing using Al–B–C (ABC) or Al–Y₂O₃ (YAG) as additives. The hardness of SiC processed with a liquid phase was always less than SiC densified without a liquid phase despite having a similar or finer grain size. With increasing Al content, the ABC system changed from trans- to intergranular fracture with a drop in hardness and a two- to threefold increase in SEPB toughness. Strength and Weibull modulus for materials processed with a liquid phase were higher than those of solid-state densified SiC. Ballistic testing, however, did not show any improvement over SiC densified with B and C additives. Depth of penetration was controlled by hardness of the SiC-based materials, while V ₅₀ values for 14.5 mm WC–Co cored projectiles were in the range of 720–750 m/s for all materials tested.     

Physical properties of ethylene vinyl acetate copolymer (EVA)/natural rubber (NR) blend based foam

In this study an attempt was made to improve the rebound resilience and to decrease the density of ethylene‐vinyl acetate copolymer (EVA) foam. For this purpose, EVA was blended with natural rubber (NR), and EVA/NR blends were foamed at 155°C, 160°C, and 165°C. To investigate the correlation between crosslinking behavior and physical properties of foams, crosslinking behavior of EVA/NR blends was monitored. The physical properties of the foams were then measured as a function of foaming temperatures and blend compositions: 165°C was found to be the optimal temperature for a crosslinking of EVA/NR foam. As a result, the density of EVA/NR blend foamed at 165°C was found to be the lowest. EVA/NR (90/10) blend, foamed at 165°C, showed lower density, better rebound resilience, and greater tear strength than EVA foam. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2212–2216, 2004     

Multiobjective Optimization of Simulated Moving Bed Reactor and its Modification — Varicol Process

A comprehensive optimization study on a Simulated Moving Bed Reactor (SMBR) system is reported in this article for the direct synthesis of Methyl Tertiary Butyl Ether (MTBE). In addition, the SMB technology, which is based on synchronous switching of ports, was modified to a new more flexible Varicol process based on non‐synchronous switching. Multi‐objective optimization has been performed for both SMBR and Varicol and their efficiencies were compared. A state‐of‐the‐art optimization technique, viz., Non‐dominated Sorting Genetic Algorithm (NSGA) that allows handling of these complex optimization problems is employed in this study.     

Water absorption,residual mechanical and thermal properties of hydrothermally conditioned nano-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> enhanced glass fiber reinforced polymer composites

The durability of the nano-Al₂O₃ enhanced glass fiber reinforced polymer (GFRP) composites in hydrothermal environment is necessary for hydro/hygro thermal applications. The present investigation emphasizes the effect of nano-Al₂O₃ filler concentration on moisture absorption kinetics, residual mechanical and thermal properties of hydrothermally treated GFRP nano-composites. Nano-Al₂O₃ particles were mixed with epoxy matrix through temperature assisted magnetic stirrer and followed by ultrasonic treatment. It has been observed that, the addition of 0.1 wt% of nano-Al₂O₃ into the GFRP nano-composites reduces the moisture diffusion coefficient by 10%, as well as improves the flexural residual strength by 16% and interlaminar residual shear strength by 17% as compared to the neat epoxy GFRP composites. However, the glass transition temperature has not been improved by the addition of nano-Al₂O₃ filler. Weibull design parameters have been determined for dry and hydrothermally conditioned nano-composites. A good agreement between the experimental and the simulated stress–strain results has been observed. The interface failure mechanism has been evaluated by field emission scanning electron microscope to support the new findings.     

Pesticides removal performance by low‐pressure reverse osmosis membranes

Pressure driven techniques (viz. reverse osmosis and nanofiltration) have the potentiality to remove the pesticides from water. The observations revealed that pesticides removal mostly depends upon the molecular weight (size exclusion) and hydrophobicity (log P) of the pesticides. Interfacial polymerization of m‐phenylene diamine (MPD) and trimesoyl chloride (TMC) on the polysulfone membranes impart the salt rejection property in it. It is shown that with the greater salt rejection property, the performance removal of pesticides also is in increasing trend. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3575–3579, 2006     

Orientation of graphitic planes during annealing of “dip deposited” amorphous carbon film: A carbon K-edge X-ray absorption near-edge study

Annealing effect of amorphous carbon thin films on Si(1 0 0) substrates is studied by normal incidence and angle dependent carbon K-edge X-ray absorption near-edge structure (XANES) spectroscopy. The angle dependence of the XANES signal shows that the graphitic basal planes are oriented perpendicular to the surface when the film is annealed at 1000 °C. Micro-Raman spectroscopy reveals two well-separated bands the D band at 1355 cm⁻¹ and G band at ∼1600 cm⁻¹, and their I_D/I_G intensity ratio indicates the formation of more graphitic film at higher annealing temperatures. X-ray diffraction pattern of 1000 °C temperature annealed film confirms the formation of graphite structure.     

Validity of modified Gompertz and Logistic models in predicting cell growth of Pediococcus acidilactici H during the production of bacteriocin pediocin AcH

Data for the cell growth of Pediococcus acidilactici H during the fermentative production of bacteriocin, pediocin AcH (taken from a previous study) was modeled by two sigmoidal functions, modified Gompertz and Logistic. Results showed that the models could adequately account for the cell growth up to the growth phase, but failed to account for the stationary and death phase.