Synthesis and application of core–shell particles as toughening agents for epoxies

Poly(butadiene-co-styrene) [P(B-S)] core-poly(methyl methacrylate) (PMMA) shell particles were prepared using a two-step emulsion polymerization. These core-shell particles were used to toughen an epoxy polymer. The role of particle-epoxy interfaces were studied by systematically varying the shell compositions of the core-shell particles such as PMMA, P[MMA-acrylonitrile (AN)], P[MMA-glycidyl methacrylate (GMA)] and P[MMA-divinyl benzene(DVB)]. Therefore, the nature of the particle-epoxy interfaces is varied in terms of physical interactions and chemical bonding. The fracture toughness values of the toughened epoxies were measured using linear elastic fracture mechanics. Results indicate that the morphology of the dispersed particles in the epoxy matrix plays an important role in the toughening of epoxies. This degree of dispersion can be varied by incorporating AN and GMA comonomers in the PMMA shells or by crosslinking the shell. In summary, nanoscale interactions of the rubber-matrix interface do not directly influence fracture toughness, instead, it was found that the nanoscale interactions could be used to control the blend morphology which has a dramatic effect on toughness. © 1995 John Wiley & Sons, Inc.     

Hydrogen sorption sites in the gallium containing hybrid catalysts used for the aromatization of light alkanes

Gallium species which were incorporated initially in the oxide form, were all in the (+3) oxidation state in the hybrid catalyst and exhibited two types of hydrogen chemisorption sites, s_hw and s_hs. The stronger sorption sites shs which predominated at higher gallium dispersion, corresponded probably to the most effective surface configuration for gallium in the aromatization ofn-butane.     

A novel technique for the preparation of secondary fatty amides

A technique for the synthesis of monosubstituted fatty amides at low temperature and ambient pressure was developed. This method involved the condensation of an amine with a triacylglycerol. The primary amine (ethyl,n-butyl,n-hexyl andn-octyl were tested) acted as reagent and solvent for the fatty substrates. No additional organic solvent or catalyst was added. Tallow, vegetable oils and fish oil all served well as substrates, as did pure tripalmitin. The rate of amidation was dependent upon temperature and the ratio of fat to amine. In a series of experiments conducted with tallow andn-butylamine at a fat:amine molar ratio of 1:16, amidation could be carried out at 20°C, producingn-butyltallowamide in 83% yield in 24 hr. When the fat:amine molar ratio was reduced to 1:8, and the temperature raised to 45°C, the amide yield was 87.6% in 24 hr. When the reaction was carried out at the boiling point ofn-butylamine (78°C) and at a fat:amine ratio of 1:8, the amide yield was 93.2% in 4 hr. The reaction progressed more rapidly with higher molecular weight amines. The identity and purity of the amides was assessed by thin-layer chromatography and confirmed by elemental analyses and infrared and C¹³ nuclear magnetic resonance spectroscopy.     

Aromatic products of 340 °C supercritical-toluene extraction of two Turkish lignites: an n.m.r. study

Fractions of Elbistan and Seyitomer (Turkish) lignites, extracted with supercritical toluene at 340 °C and 8 MPa, have been separated by solvent extraction and silica-gel chromatography. Analyses by n.m.r. and i.r. spectroscopies and other methods have been combined in structural-analysis schemes to yield information about the average molecule in aromatic extracts. Carbon aromaticities, f_a, derived from 22.63 MHz ¹H-decoupled pulse Fourier-transform (PFT) ¹³C-n.m.r. are more widely spread for Elbistan (0.34–0.56) than for Seyitomer (0.40–0.43), and are lower than for supercritical-gas (SCG) products from bituminous coals. ¹³C-n.m.r. also reveals the presence of aromatic ether-O in polar fractions. Narrow aromatic signals in 100 MHz ¹H-n.m.r. spectra suggest the presence of single-aromatic-ring average structures. In the hexane-soluble aromatics, 27% (Elbistan) and 29% (Seyitomer) of the available sites are substituted by alkyI groups, some of which are at least eight carbon atoms long; the hexane-soluble polar and asphaltene/asphaltol fractions contain fewer such groups.     

Expert judgement on the long term possibilities of conventional emission abatement technologies for passenger cars

Topics in Catalysis - This paper presents the results of a quantitatively substantiated “expert judgement” concerning the potential for further reduction of the exhaust emissions of...     

A usability evaluation of medical software at an expert conference setting

Introduction

A usability test was employed to evaluate two medical software applications at an expert conference setting. One software application is a medical diagnostic tool (electrocardiogram [ECG] viewer) and the other is a medical research tool (electrode misplacement simulator [EMS]). These novel applications have yet to be adopted by the healthcare domain, thus, (1) we wanted to determine the potential user acceptance of these applications and (2) we wanted to determine the feasibility of evaluating medical diagnostic and medical research software at a conference setting as opposed to the conventional laboratory setting.

Methods

The medical diagnostic tool (ECG viewer) was evaluated using seven delegates and the medical research tool (EMS) was evaluated using 17 delegates that were recruited at the 2010 International Conference on Computing in Cardiology. Each delegate/participant was required to use the software and undertake a set of predefined tasks during the session breaks at the conference. User interactions with the software were recorded using screen-recording software. The ‘think-aloud’ protocol was also used to elicit verbal feedback from the participants whilst they attempted the pre-defined tasks. Before and after each session, participants completed a pre-test and a post-test questionnaire respectively.

Results

The average duration of a usability session at the conference was 34.69 min (SD = 10.28). However, taking into account that 10 min was dedicated to the pre-test and post-test questionnaires, the average time dedication to user interaction of the medical software was 24.69 min (SD = 10.28). Given we have shown that usability data can be collected at conferences, this paper details the advantages of conference-based usability studies over the laboratory-based approach. For example, given delegates gather at one geographical location, a conference-based usability evaluation facilitates recruitment of a convenient sample of international subject experts. This would otherwise be very expensive to arrange. A conference-based approach also allows for data to be collected over a few days as opposed to months by avoiding administration duties normally involved in laboratory based approach, e.g. mailing invitation letters as part of a recruitment campaign.Following analysis of the user video recordings, 41 (previously unknown) use errors were identified in the advanced ECG viewer and 29 were identified in the EMS application. All use errors were given a consensus severity rating from two independent usability experts. Out of a rating scale of 4 (where 1 = cosmetic and 4 = critical), the average severity rating for the ECG viewer was 2.24 (SD = 1.09) and the average severity rating for the EMS application was 2.34 (SD = 0.97). We were also able to extract task completion rates and times from the video recordings to determine the effectiveness of the software applications. For example, six out of seven tasks were completed by all participants when using both applications. This statistic alone suggests both applications already have a high degree of usability. As well as extracting data from the video recordings, we were also able to extract data from the questionnaires. Using a semantic differential scale (where 1 = poor and 5 = excellent), delegates highly rated the ‘responsiveness’, ‘usefulness’, ‘learnability’ and the ‘look and feel’ of both applications.

Conclusion

This study has shown the potential user acceptance and user-friendliness of the novel EMS and the ECG viewer applications within the healthcare domain. It has also shown that both medical diagnostic software and medical research software can be evaluated for their usability at an expert conference setting. The primary advantage of a conference-based usability evaluation over a laboratory-based evaluation is the high concentration of experts at one location, which is convenient, less time consuming and less expensive.     

High-Thermal-Conductivity Aluminum Nitride Ceramics: The Effect of Thermodynamic, Kinetic, and Microstructural Factors

Improvement in the thermal conductivity of aluminum nitride (AlN) can be realized by additives that have a high thermodynamic affinity toward alumina (Al₂O₃), as is clearly demonstrated in the aluminum nitride-yttria (AlN-Y₂O₃) system. A wide variety of lanthanide dopants are compared at equimolar lanthanide oxide:alumina (Ln₂O₃: Al₂O₃, where Ln is a lanthanide element) ratios, with samaria (Sm₂O₃) and lutetia (Lu₂O₃) being the dopants that give the highest- and lowest-thermal-conductivity AlN composites, respectively. The choice of the sintering aid and the dopant level is much more important than the microstructure that evolves during sintering. A contiguous AlN phase provides rapid heat conduction paths, even at short sintering times. AlN contiguity decreases slightly as the annealing times increase in the range of 1–1000 min at 1850°C. However, a substantial increase in thermal conductivity results, because of purification of AlN grains by dissolution-reprecipitation and bulk diffusion. Removal of grain-boundary phases, with a concurrent increase in AlN contiguity, occurs at high annealing temperatures or at long times and is a natural consequence of high dihedral angles (poor wetting) in liquidphase-sintered AlN ceramics.     

Synthesis of SBS thermoplastic block copolymers in cyclohexane in the presence of diethylether used as a structure modifier

Diethylether (DEE) was used as a structure modifier during the synthesis of linear styrene-butadiene block copolymers of poly A-block-polyB-block-polyA type (SBS). The microstructures of synthesized polymers were analyzed, and the effect of DEE on polymerization kinetics was studied. Addition of DEE at 2 wt% concentration results in the highest styrene polymerization rate, while addition at 6 wt% concentration gives the highest butadiene polymerization rate. The vinyl content of the polybutadiene portion increases from 14 to 47% with an increase in the DEE concentration from 500 ppm to 10 wt% while thetrans- l,4 andcis-1,4 isomers decrease. For SBS polymer synthesized via a sequential method, the addition of DEE as a structure modifier minimizes the crossover deficiency which would otherwise result in a skewed molecular weight distribution with a higher polydispersity. For SBS polymers made via a coupling method, the coupling efficiency appears to be constant in a range of DEE concentration from 500 ppm to 1 wt% before declining with a further increase in DEE.     

Optimizing BRDF orientations for the manipulation of anisotropic highlights

This paper introduces a system for the direct editing of highlights produced by anisotropic BRDFs, which we call anisotropic highlights. We first provide a comprehensive analysis of the link between the direction of anisotropy and the shape of highlight curves for arbitrary object surfaces. The gained insights provide the required ingredients to infer BRDF orientations from a prescribed highlight tangent field. This amounts to a non‐linear optimization problem, which is solved at interactive framerates during manipulation. Taking inspiration from sculpting software, we provide tools that give the impression of manipulating highlight curves while actually modifying their tangents. Our solver produces desired highlight shapes for a host of lighting environments and anisotropic BRDFs.     

The effect of trans-isomers on the physical properties of hydrogenated oils

Data have been presented which indicate a positive relationship between thetrans-isomer content of a hydrogenated oil and the congeal point, Wiley melting-point, and solids index. It has also been shown that cottonseed oil and soybean oil undergo substantially the same type of reaction under identical hydrogenating conditions. This conclusion is based on the relationship oftrans-isomer formation to total reduction in unsaturation up to the point that equilibrium is reached and saturation of thetrans-isomers occurs. This equilibrium was noted at between 60–70 iodine value. The relationship oftrans-isomer formation to the total reduction in double bonds can be expressed as the hydrogenation index. This is a reliable indication of the type of reaction taking place up to the point where appreciable hydrogenation of thetrans-isomers occur.