Viscosity of Fe90B x Si(10 − x) melts

High Temperature - The temperature dependences of the viscosity of liquid Fe90B x Si(10 − x) alloys are studied in the mode of heating and subsequent cooling. The temperature dependences of...     

Simulation of liquid micro-jet in free expanding high-speed co-flowing gas streams

We present the development of an experimentally validated computational fluid dynamics model for liquid micro jets. Such jets are produced by focusing hydrodynamic momentum from a co-flowing sheath of gas on a liquid stream in a nozzle. The numerical model based on laminar two-phase, Newtonian, compressible Navier–Stokes equations is solved with finite volume method, where the phase interface is treated by the volume of fluid approach. A mixture model of the two-phase system is solved in axisymmetry using?~?300,000 finite volumes, while ensuring mesh independence with the finite volumes of the size 0.25 µm in the vicinity of the jet and drops. The numerical model is evaluated by comparing jet diameters and jet lengths obtained experimentally and from scaling analysis. They are not affected by the strong temperature and viscosity changes in the focusing gas while expanding at nozzle outlet. A range of gas and liquid-operating parameters is investigated numerically to understand their influence on the jet performance. The study is performed for gas and liquid Reynolds numbers in the range 17–1222 and 110–215, and Weber numbers in the range 3–320, respectively. A reasonably good agreement between experimental and scaling results is found for the range of operating parameters never tackled before. This study provides a basis for further computational designs as well as adjustments of the operating conditions for specific liquids and gases.     

A decision support system for the diagnosis of melanoma: A comparative approach

Melanoma is the most deathful of all skin cancers and the number of cases grows every year. The extirpation in early phases implies a high degree of survival so it is fundamental to diagnose it as soon as possible. In this paper we present a clinical decision support system for melanoma diagnosis using as input an image set of the skin lesion to be diagnosed. The system analyses the image sequence to extract the affected area, determinates the characteristics which indicate the degree of damage and, according to them, it makes a decision. Several methods of classification are proposed: a multilayered perceptron, a Bayesian classifier and the algorithm of the K nearest neighbours. These methods work independently and also in combination making a collaborative decision support system. The classification rates obtained are around 87%.     

Dietary exposure of the Belgian population to emulsifiers E481 (sodium stearoyl-2-lactylate) and E482 (calcium stearoyl-2-lactylate)

A dietary exposure assessment of food emulsifiers E481 (sodium stearoyl-2-lactylate) and E482 (calcium stearoyl-2-lactylate) in the Belgian population was performed. Nationally representative food consumption data from the Belgian National Food Consumption Surveys 2004 (BNFCS2004) and 2014 (BNFCS2014) were used for calculations. A conservative approach (combining individual food consumption data with the maximum permitted level (MPL) of foods (tier 2), was compared with more refined estimates (combining individual food consumption data with actual concentrations measured in food products available on the Belgian market (tier 3)). Estimated daily intakes were compared to the acceptable daily intake (ADI) of the stearoyl-2-lactylates. The results of tier 2 demonstrated that 92% of the children (3–9 years), 53% of the adolescents (10–17 years), 15% of the adults (18–64 years) and 26% of the elderly (64–98 years) had a potential intake higher than the ADI. When replacing the MPL with maximum analysed concentration levels in foods, daily intake estimates decreased dramatically. The estimated daily intake of the food emulsifiers was below the ADI for all age groups, except for a small percentage of children (1.9%) for which the intake exceeded the ADI. The main contributors to the exposure of E481 and E482 were bread, rolls and fine bakery wares.     

Storage of quantum coherences as phase-labelled local polarization in solid-state nuclear magnetic resonance

Nuclear spins are promising candidates for quantum information processing because their good isolation from the environment precludes the rapid loss of quantum coherence. Many strategies have been developed to further extend their decoherence times. Some of them make use of decoupling techniques based on the Carr-Purcell and Carr-Purcell-Meiboom-Gill pulse sequences. In many cases, when applied to inhomogeneous samples, they yield a magnetization decay much slower than that of the Hahn echo. However, we have proved that these decays cannot be associated with longer decoherence times, as coherences remain frozen. They result from coherences recovered after their storage as local polarization and thus they can be used as memories. We show here how this freezing of the coherent state, which can subsequently be recovered after times longer than the natural decoherence time of the system, can be generated in a controlled way with the use of field gradients. A similar behaviour of homogeneous samples in inhomogeneous fields is demonstrated. It is emphasized that the effects of inhomogeneities in solid-state nuclear magnetic resonance, independently of their origin, should not be disregarded, as they play a crucial role in multipulse sequences.     

A 7 year long measurement period investigating the correlation of corrosion,deposit and fuel in a biomass fired circulated fluidized bed boiler

The present investigation involves a unique, 7 year (2001–2007) long study of corrosion and deposits on superheater tubes in a biomass fired circulated fluidized bed boiler. These measurements are correlated against the different fuels used over this period. In the earlier years, the boiler was run with a mixture of different biomass fuels and peat. In later years, recycled wood was introduced into the fuel mix. The deposit growth rate approximately doubled when the recycled wood content of the fuel was increased to 10–20%. Small amounts of chlorine and zinc were found both in the recycled wood and in the deposit layer. These elements together with alkali metals from the biomass, have the potential to form sticky compounds that increase the deposit growth rate. The corrosion rate of the superheater tubes varied over the study period. A number of possible explanations for this phenomenon are discussed.     

Copying low spatial frequency diffraction gratings in photopolymer as phase holograms

Abstract

Photopolymers are studied as holographic recording materials for recording computer-generated phase holograms. The recording was performed using a holographic copying process, in which the master is produced by means of a high resolution graphic device. To our knowledge it is the first time a photopolymer has been used to obtain copies with this technique. As it does not work in real time, it is possible to store the diffractive optical element for a long time because the dye is finished during exposition and no wet processing is needed after exposition. The photopolymer used in these experiments was composed of acrylamide and triethanolamine as the co-initiator, photo-initiated with a dye, yellow eoxine. Components were supported by a film of poly-(vinylalcohol) (PVA). The resulting thickness of the film was 70 & plusmn; 5 μm, symmetrical and asymmetrical diffraction gratings were obtained as phase holograms by index and thickness modulation, monitored with an electron microscope, and the low spatial frequency response of the photopolymer was studied. Diffraction efficiency achieved for copied gratings was about 30%. With this study we get a complete characterization of the photopolymer for the full range of the typical spatial frequencies that can be recorded with the high resolution graphic device used.