Effect of the root canal final rinse protocols on the debris and smear layer removal and on the push‐out strength of an epoxy‐based sealer

The aim of the present study was to evaluate the efficacy of QMiX, SmearClear, and 17% EDTA for the debris and smear layer removal from the root canal and its effects on the push‐out bond strength of an epoxy‐based sealer by scanning electron microscopy (SEM). Forty extracted human canines (n = 10) were assigned to the following final rinse protocols: G1‐distilled water (control), G2–17% EDTA, G3‐SmearClear, and G4‐QMiX. The specimens were submitted to a SEM analysis to evaluate the presence of debris and smear layer, respectively, in the apical or cervical segments. In sequence, forty extracted human maxillary canines with the root canals instrumented were divided into four groups (n = 10) similar to the SEM analysis study. After the filling with AH Plus, the roots were transversally sectioned to obtain dentinal slices. The specimens were submitted to a push‐out bond strength test using an electromechanical testing machine. The statistical analysis for the SEM and push‐out bond strength studies were performed using the Kruskal–Wallis and Dunn tests (α = 5%). There was no difference among the G2, G3, and G4 efficacy in removing the debris and smear layer (P > 0.05). The efficacy of these groups was superior to the control group. The push‐out bond strength values of G2, G3, and G4 were superior to the control group. The ability to remove the debris and smear layer by SmearClear and QMiX was as effective as the 17% EDTA. The final rinse with these solutions promoted similar push‐out bond strength values. Microsc. Res. Tech. 76:533–537, 2013. © 2013 Wiley Periodicals, Inc.     

Long-term stability of hydrogen and organic acids production in an anaerobic fluidized-bed reactor using heat treated anaerobic sludge inoculum

This study evaluates the stability of hydrogen and organic acids production in an anaerobic fluidized-bed reactor (AFBR) that contains expanded clay (2.8–3.35 mm in diameter) as a support medium and is operated on a long-term basis. The reactor was inoculated with thermally pre-treated anaerobic sludge and operated with decreasing hydraulic retention time (HRT), from 8 h to 1 h, at a controlled temperature of 30 °C and a pH of about 3.8. Glucose (2000 mg L^?1) was used as the substrate, generating conversion rates of 92–98%. Decreasing the HRT from 8 h to 1 h led to an increase in average hydrogen-production rates, with a maximum value of 1.28 L h^?1 L^?1 for an HRT of 1 h. In general, hydrogen yield production increased as HRT decreased, reaching 2.29 mol of H₂/mol glucose at an HRT of 2 h and yielding a maximum hydrogen content of 37% in the biogas. No methane was detected in the biogas throughout the period of operation. The main soluble metabolites (SMP) were acetic acid (46.94–53.84% of SMP) and butyric acid (34.51–42.16% of SMP), with less than 15.49% ethanol. The steady performance of the AFBR may be attributed to adequate thermal treatment of the inoculum, the selection of a suitable support medium for microbial adhesion, and the choice of satisfactory environmental conditions imposed on the system. The results show that stable hydrogen production and organic acids production were maintained in the AFBR over a period of 178 days.     

Effect ofSolanum Glycoalkaloids on Potato Aphid,Macrosiphum euphorbiae

Macrosiphum euphorbiae, also known as the potato aphid, is a potato virus vector, associated with decreased tuber production. Feeding, toxicity, and reproductive effects of the major potato glycoalkaloids (α-chaconine and α-solanine), their common aglycone (solanidine), and a nonpotato glycoalkaloid (α-tomatine) and its aglycone (tomatidine) onM. euphorbiae were studied. As expected, neither α-chaconine nor α-solanine had a strong lethal effect on the aphid, but α-chaconine stimulated feeding at low concentrations. Both aglycones were deterrent and lethal at high concentrations and, like α-chaconine and α-tomatine, they delayed the appearance and decreased the number of nymphs.     

The relationship context of human behavior and development.

The influence of social relationships on human development and behavior is receiving increased attention from psychologists, who are central contributors to the rapidly developing multidisciplinary field of relationship science. In this article, the authors selectively review some of the significant strides that have been made toward understanding the effects of relationships on development and behavior and the processes by which relationships exert their influence on these, with the purpose of highlighting important questions that remain to be answered, controversial issues that need to be resolved, and potentially profitable paths for future inquiry. The authors' thesis is that important advances in psychological knowledge will be achieved from concerted investigation of the relationship context in which most important human behaviors are developed and displayed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Treatment of patients admitted to the hospital with congestive heart failure: specialty-related disparities in practice patterns and outcomes

OBJECTIVES: This study sought to define specialty-related differences in the care and outcome of patients admitted to the hospital with congestive heart failure (CHF). BACKGROUND: Congestive heart failure is the leading diagnosis-related group (DRG) discharge diagnosis in the United States and accounts for an estimated annual hospital cost in excess of $7 billion. The clinical impact of aggressive CHF management and the importance of the subspecialist in guiding this care have not been evaluated. METHODS: To define differences in physician practice patterns, we performed a chart review of consecutive patients admitted to a university teaching hospital with a primary DRG discharge diagnosis of CHF. We compared treatment and outcome of patients cared for by a generalist (n = 160) and those whose care was guided by a cardiologist (n = 138) during their index hospital period with CHF and over the next 6 months. RESULTS: At our institution, > 50% of patients admitted to the hospital with CHF cared for by generalists alone had minimal (New York Heart Association functional class I or II) symptoms, compared with < 15% of those cared for by a cardiologist (p < 0.01). Although generalists' patients underwent significantly fewer in-hospital diagnostic tests and had shorter lengths of stay, they had a 1.7-fold increased risk of readmission for CHF within 6 months (p < 0.05). Six-month cardiac and all-cause mortality were not significantly different between the groups. The type of physician caring for the patient and a history of diabetes, previous CHF or myocardial infarction were independent predictors of readmission for CHF. CONCLUSIONS: Involvement of a cardiologist in the care of patients admitted to the hospital with CHF is associated with increased use of diagnostic testing, longer hospital stays and improved clinical outcome. These results substantiate practice guidelines that suggest a role for cardiologists in the care of symptomatic patients with CHF.     

Numerical prediction of the instantaneous regenerator and in-cylinder heat transfer of a stirling engine

The paper is concerned with the study of the effects of the in-cylinder and regenerator heat transfer characteristics of a single-acting opposed-piston Stirling engine, with heater and cooler both omitted, for which a simulation model has been developed. The engine thermodynamic cycle is divided into a number of time-steps, and a system of nonlinear ordinary differential equations, which describe the energy balances over the three basic control volumes (hot and cold cylinders and regenerator), is solved numerically. Empirical correlations are used to determine the instantaneous heat transfer coefficients in the regenerator (flow across a porous medium) and inside the cylinder space (gas confined in a cylindrical volume with a moving boundary). Numerical results from the model are presented.     

Characterization of two biodegradable polymers of potential application within the biomaterials field

An extensive characterization of two biodegradable polymers that may constitute an alternative, if one is aiming at orthopaedic applications, to the currently used poly(glicolic acid), poly(lactic acid) or polyhydroxybutyrate was carried out. A cellulose acetate and three different grades of a novel starch based polymer were studied. The characterization included: tensile and instrumented impact tests, rheological measurements, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transformed infra-red spectroscopy (FTIR), differential scanning calorimetry (DSC), and long-term degradation trials in Hank's solution. The results show that both polymers, specially the starch based one, present a great potential for biomedical applications, on which adequate mechanical properties associated to a controlled degradation rate are required.     

Conjugation to Albumin‐Binding Molecule Tags as a Strategy to Improve Both Efficacy and Pharmacokinetic Properties of the Complement Inhibitor Compstatin

The compstatin family of complement inhibitors has shown promise in various immuno‐inflammatory disorders. Although recent analogues show beneficial pharmacokinetics, further extension of the plasma half‐life is expected to benefit systemic application of these peptidic inhibitors. We therefore synthesized conjugates of compstatin analogues and albumin‐binding molecules (ABM) to increase circulatory residence. Equilibrium dialysis in complement‐depleted serum showed a marked increase in plasma protein binding from <8 % to >99 % for a resulting chimera (ABM2‐Cp20). Further analysis confirmed interaction with albumin from different species, primarily via site II. Importantly, ABM2‐Cp20 bound 20‐fold stronger to its target protein C3b (K_D=150 pM ) than the parent peptide. Kinetic and in silico analysis suggested that ABM2 occupies a secondary site on C3b and improves the dissociation rate via additional contacts. Addition of an ABM modifier thereby not only improved plasma protein binding but also produced the most potent compstatin analogue to date with potential implications for the treatment of systemic complement‐related diseases.