Advances and Challenges in Two?Dimensional Organic–Inorganic Hybrid Perovskites Toward High?Performance Light?Emitting Diodes

Two-dimensional (2D) perovskites are known as one of the most promising luminescent materials due to their structural diversity and outstanding optoelectronic p...     

Study on Thermal Deformation Behavior and Properties of Vacuum Hot-press Sintered W(50)/Cu-Al_2O_3 Composite

In this work, the tungsten particulate reinforced Al2O3 dispersion strengthened copper base composites were successfully fabricated by using a vacuum hot-press sintering method. With the test temperature varying from 650 to 950 ℃ and the strain rate varying from 0.01 to 5 s-1, the W(50)/Cu-Al2O3 composites were isothermally compressed on a Gleeble-1500D thermal simulator. The true stress-strain curves of the W(50)/Cu-Al2O3 under different test conditions were obtained. The dynamic recrystallization of the W...     

Salt Concentration Effects in Planar Light‐Emitting Electrochemical Cells

Incorporation of ions in the active layer of organic semiconductor devices may lead to attractive device properties like enhanced injection and improved carrier transport. In this paper, we investigate the effect of the salt concentration on the operation of light‐emitting electrochemical cells, using experiments and numerical calculations. The current density and light emission are shown to increase linearly with increasing ion concentration over a wide range of concentrations. The increasing current is accompanied by an ion redistribution, leading to a narrowing of the recombination zone. Hence, in absence of detrimental side reactions and doping‐related luminescence quenching, the ion concentration should be as high as possible.     

Thermal conductivity measurement of the epoxies and composite material for low temperature superconducting magnet design

The thermal conductivities of solid materials were measured by a G-M cryo-cooler based apparatus in the temperature range of 2.6–21.0 K. The performance of this apparatus was verified by measuring the thermal conductivity of 304-stainless steel, and good reproducibility as well as accuracy was shown when compared with the certified values. The thermal conductivities of EC1017 and Stycast2850FT and a composite material were measured. Similar behavior to amorphous materials was shown for EC1017 and Stycast2850FT in that there was an apparent plateau, which could be ascribed to a very lower crystallinity of epoxy. An equivalent model was proposed to predict the thermal conductivity of the composite material.     

Interface-dependent resistance switching in Nd<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> ceramics

Interface-dependent electric-pulse-induced resistance switching effect (EPIR) in Nd_0.7Sr_0.3MnO₃ ceramics was studied. The results reveal that the EPIR effect originates from the interface between the electrodes and the bulk, and the EPIR ratio as well as the high and low resistance states can be strongly influenced by applying a large electrical field on the sample for different intervals. Also, the pulse parameters have great effect on the stability of EPIR and the optimal pulse width, pulse amplitude and read bias are obtained. Based on the space charge limited current mechanism together with the theory of interfacial charge-trapped state, the interface-dependent resistance switching effect is discussed.     

Tests on inclined,tapered and STS concrete-filled steel tubular (CFST) stub columns

This paper is an attempt to study the behaviour of the inclined, tapered and straight-tapered-straight (STS) concrete-filled steel tubular (CFST) stub columns. A total of 34 specimens were tested. The main parameters were the column type (inclined, tapered and STS), inclined or tapered angle (from 0°to 9°) and the cross-sectional type (circular and square). Comparisons with predicted cross-sectional strengths were made using the existing codes: AIJ-2008, AISC-2005, BS5400-2005, DBJ-13-51-2003 and EC4-2004.     

在中小学教学中渗透生命教育

对生命的关注是教育的本真所在,提升个体生命质量与其社会存在意义是教育的终极追求。中小学生生命教育的缺失,致使学生不同程度地存在对生命价值漠视的现象。因此,通过对生命教育的内涵、现状、目标、内容和实施途径的深入探讨,在中小学教学中渗透生命教育将有助于学生学会懂得、思考和理解生命的价值,进而以旺盛的生命力来表达生命的意义。     

基于ARM的主动频率偏移孤岛检测法的实现

阐述了一种基于ARM的主动频率偏移检测孤岛效应的方法。通过计算,验证了SPWM对频率偏移精度调整的可行性。利用正反两次调整频率偏移量,达到快速,准确并且对电网不产生任何干扰的情况下检测出孤岛效应。     

基于TCP／IP的网关转串口通讯

以8051系列的单片机和RTL8019AS网络接口芯片等构建网络接入系统,在RTL8019AS芯片提供的应用基础上完成TCP／IP协议,经过8051单片机实现数据的RJ-45与串口通讯。该设计为传统串口设备通过标准TCP／IP协议接入Internet提供了一种低成本解决方案。