单片机系统的动态加密技术

单片机系统产品的加密和解密技术永远是一个矛盾的统一体。然而 ,为了更好的保护好自己的单片机技术成果和知识产权 ,加大解密成本 ,研究新型加密技术仍是保护成果的主要手段之一。文中在讨论了传统的单片机系统加密和解密技术的基础上 ,提出一种实用而有效的动态加密技术的实现方案。     

高聚合度β-萘磺酸盐缩合物的合成

介绍了用工业萘、硫酸、甲醛为原料，合成高聚合度β-萘磺酸盐甲醛缩合物的工艺过程。试验了不同的萘与甲醛配比、反应时间和催化剂对缩合物核体数的影响，确定了可行的工艺条件。     

高度有序多孔氧化铝模板的制备工艺与生长机制的研究

采用二次氧化法制备出高度有序的多孔氧化铝模板，结合扫描电镜和原子力显微镜对其结构、形貌进行观察和表征。研究了铝箔预处理和温度等对多孔氧化铝模板孔洞有序性的影响，讨论了有序孔洞的自组织生长机理。     

Structural properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 relaxor ferroelectric thin films on SrRuO3 conducting oxides

Coating of 0.65Pb(Mg_1/3Nb_2/3)O₃–0.35PbTiO₃ (PMN–PT) relaxor ferroelectrics by a sol–gel method is followed by growth of epitaxial SrRuO₃ (SRO) metallic oxide electrodes on SrTiO₃ (STO) single-crystal substrate by pulsed laser deposition. High-quality PMN–PT films on SRO with preferred growth orientation were successfully fabricated by controlling the operation parameters. Structural properties of relaxor ferroelectric PMN–PT thin films on SRO/STO substrates have been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM). In-plane and out-of-plane alignments of the heterostructure are confirmed and the structural twinning of the materials are also revealed.     

Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

舞钢管线钢的开发与生产

系统介绍了舞钢开发的针状铁素体型X70宽厚板的设计思路、工艺特点和实物水平；采用电炉 炉外精炼 连铸 TMCP工艺生产的X70宽厚板满足西气东输专用技术条件的要求，并批量应用在西气东输主干线工程中。     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

翅片式空气冷却器改造

针对茂名石化乙烯工业公司全密度聚乙烯装置翅片式空气冷却器存在的问题。结合生产实际要求进行了改造。将原设备换热芯由不可拆结构改为可抽芯结构。原圆形换热管更换为椭圆管。材质由SS304不锈钢更换为铜，并对改造后的空气冷却器进行了传热核算。理论和实践证明，改造是成功的。