Use of annatto dye extraction residue as additive in the cassava starch composite foam tray

Pigment extraction from annatto seed results in large amounts of by-products (~97%) and residual carotenoid content. In this work, composite foam trays containing 90:10 (10AR), 80:20 (20AR), and 70:30 (30AR) cassava starch: annatto residue (AR) ratios were prepared by thermopressing. The physical–chemical properties, thermal stability, antioxidant activity, and biodegradability of the composite foam trays and cassava starch foam tray (control) were measured and compared. High AR ratio (20AR and 30AR) yielded thicker (2.1–2.3 mm), denser (0.72–0.74 g/cm³), and less porous (32.5–33%) composite foam trays than the control due to incomplete cassava starch gelatinization and the presence of fibers, lipids, and proteins in AR. Thus, the composite foam trays had lower mechanical resistance (0.4–0.8 MPa) and elongation (0.4%–0.7%) than the control (2.9 MPa and 1.5%). However, addition of high AR ratio increased the foam tray resistance to water and yielded colorful foam trays with antioxidant property as measured by DPPH^• (0.11 to 0.52 μM TE/100 g) and ABTS^•+ (7.86–53.77 μM TE/100 g). Increasing the AR ratio in the composite foam tray delayed the biodegradation time by 17 days as compared to the control, but all the foam trays were more biodegradable than EPS. Therefore, AR has potential use in the production of bioactive composite foam trays.     

Synthesis and intercalation of silver nanoparticles in kaolinite/DMSO complexes

Ag nanoparticles were synthesized in the interlamellar space of a layered kaolinite. Disaggregation of the lamellae of the nonswelling kaolinite was achieved by the intercalation of dimethyl sulfoxide (DMSO). The kaolinite was suspended in aqueous AgNO₃ solution and the adsorbed Ag⁺ ions were reduced on the surface of kaolinite lamellae with NaBH₄ or UV light irradiation. The silver nanoparticles formed were characterized by X-ray diffraction (XRD), small angle X-ray scattering (SAXS), and transmission electron microscopy (TEM). We studied the effects of the two reduction methods on the size and the size distribution of Ag nanoparticles and how clay mineral structure is altered as a consequence of particle formation. It was established that the size of Ag nanoparticles depends on both silver content and the reduction method. Photoreduction of silver led to the formation of relatively large Ag nanoparticles (diameter 8–14 nm).     

Catalysts based in cerium oxide for wet oxidation of acrylic acid in the prevention of environmental risks

Acrylic acid is a refractory compound for the non-catalytic wet oxidation (WO) process and can seriously damage the environment when released in industrial effluents. Oxidation of acrylic acid by catalytic wet oxidation (CWO) was studied in slurry conditions in a high-pressure batch reactor at 200 °C and 15 bar of oxygen partial pressure. Several solid cerium-based catalysts prepared in our laboratory were used (Ag/Ce, Co/Ce, Mn/Ce, CeO, MnO) and evaluated in terms of activity, selectivity and stability. Mn/Ce shows the higher activity in 2 h with 97.7% reduction of total organic carbon (TOC) followed by: MnO(95.5%)>Ag/Ce(85.0%)>Co/Ce(65.1%)>CeO(61.2%). Attempts were also carried out to analyze the influence of different Mn/Ce molar ratios. High percentages of Mn lead to practically total organic carbon concentration (TOC) abatements while low ratios lead to the formation of non-oxidizable compounds. Acrylic acid was readily degraded by all the catalysts pointing out the high importance of using a catalytic process. pH was an indicator of the reaction pathway and acetic acid was found as the major reaction intermediate compound; however it is completely oxidized after 2 h with exception for Co/Ce, CeO and MnO. Carbon adsorption and leaching of metals were poorly found for Mn/Ce indicating high stability. The catalyst microstructure after the reaction was analyzed and formation of whiskers of β-MnO₂ (or less probably MnOOH) were observed at the catalyst surface. Therefore, Mn/Ce revealed to be a promising catalyst for the treatment of effluents containing acrylic acid; nevertheless, its commercialization depends on further research.     

Prediction of contact maps with neural networks and correlated mutations

Contact maps of proteins are predicted with neural network-basedmethods, using as input codings of increasing complexity includingevolutionary information, sequence conservation, correlatedmutations and predicted secondary structures. Neural networksare trained on a data set comprising the contact maps of 173non-homologous proteins as computed from their well resolvedthree-dimensional structures. Proteins are selected from theProtein Data Bank database provided that they align with atleast 15 similar sequences in the corresponding families. Thepredictors are trained to learn the association rules betweenthe covalent structure of each protein and its contact map witha standard back propagation algorithm and tested on the sameprotein set with a cross-validation procedure. Our results indicatethat the method can assign protein contacts with an averageaccuracy of 0.21 and with an improvement over a random predictorof a factor >6, which is higher than that previously obtainedwith methods only based either on neural networks or on correlatedmutations. Furthermore, filtering the network outputs with aprocedure based on the residue coordination numbers, the accuracyof predictions increases up to 0.25 for all the proteins, withan 8-fold deviation from a random predictor. These scores arethe highest reported so far for predicting protein contact maps.     

Kuwanon‐L as a New Allosteric HIV‐1 Integrase Inhibitor: Molecular Modeling and Biological Evaluation

HIV‐1 integrase (IN) active site inhibitors are the latest class of drugs approved for HIV treatment. The selection of IN strand‐transfer drug‐resistant HIV strains in patients supports the development of new agents that are active as allosteric IN inhibitors. Here, a docking‐based virtual screening has been applied to a small library of natural ligands to identify new allosteric IN inhibitors that target the sucrose binding pocket. From theoretical studies, kuwanon‐L emerged as the most promising binder and was thus selected for biological studies. Biochemical studies showed that kuwanon‐L is able to inhibit the HIV‐1 IN catalytic activity in the absence and in the presence of LEDGF/p75 protein, the IN dimerization, and the IN/LEDGF binding. Kuwanon‐L also inhibited HIV‐1 replication in cell cultures. Overall, docking and biochemical results suggest that kuwanon‐L binds to an allosteric binding pocket and can be considered an attractive lead for the development of new allosteric IN antiviral agents.     

Aggregation Behavior of Perfluorononanoic Acid/Sodium Dodecyl Sulfate Mixtures

The mixed system of an anionic hydrocarbon surfactant, sodium dodecyl sulfate, and a perfluorinated surfactant, perfluorononanoic acid (PFNA), was investigated by a combination of methods. The critical micellar concentrations (CMC) were determined over a wide range of sample compositions by surface tension, conductivity and UV–visible spectrophotometry using N-(4-nitrophenyl)perfluorononanamide as a molecular probe. The values of CMC obtained by different techniques were in good agreement. In addition, the aggregation numbers were determined in the mixtures with a low content of hydrocarbon surfactant, by measuring the fluorescence quenching of pyrene. The hydrodynamic radii of the aggregates were estimated through the diffusion ordered ¹⁹F- and ¹H-NMR spectroscopy. The values obtained are in agreement with those expected according to the measured aggregation numbers. The analysis of the data with different aggregation models suggests the formation of a non-ideal mixed micelle that is enriched in the perfluorinated surfactant when its mole fraction increases, and that is practically formed by PFNA only at mole fractions higher than 0.8.     

Use of plant stanol ester margarine among persons with and without cardiovascular disease: Early phases of the adoption of a functional food in Finland

Background

The plant stanol ester margarine Benecol^® is a functional food that has been shown to lower effectively serum total and LDL-cholesterol. The purpose of this post-marketing study is to characterize users of plant stanol ester margarine with and without cardiovascular disease.

Methods

A cohort of plant stanol ester margarine users was established based on a compilation of 15 surveys conducted by the National Public Health Institute in Finland between 1996–2000. There were 29 772 subjects aged 35–84 years in the cohort. The users of plant stanol ester margarine were identified by the type of bread spread used.

Results

The plant stanol ester margarine was used as bread spread by 1332 (4.5%) subjects. Almost half (46%) of the users reported a history of cardiovascular disease. Persons with cardiovascular disease were more likely to use plant stanol ester margarine (8%) than persons without cardiovascular disease (3%). Users with and without cardiovascular disease seemed to share similar characteristics.In particular, they were elderly people with otherwise healthy life-styles and diet. They were less likely smokers, more likely physically active and less likely obese than nonusers. The users reported being in good or average health in general and having used cholesterol-lowering drugs.

Conclusion

Plant stanol ester margarine seems to be used by persons for whom it was designed and in a way it was meant: as part of efforts for cardiovascular disease risk reduction.

     

ER Stress in ERp57 Knockout Knee Joint Chondrocytes Induces Osteoarthritic Cartilage Degradation and Osteophyte Formation

Ageing or obesity are risk factors for protein aggregation in the endoplasmic reticulum (ER) of chondrocytes. This condition is called ER stress and leads to induction of the unfolded protein response (UPR), which, depending on the stress level, restores normal cell function or initiates apoptotic cell death. Here the role of ER stress in knee osteoarthritis (OA) was evaluated. It was first tested in vitro and in vivo whether a knockout (KO) of the protein disulfide isomerase ERp57 in chondrocytes induces sufficient ER stress for such analyses. ER stress in ERp57 KO chondrocytes was confirmed by immunofluorescence, immunohistochemistry, and transmission electron microscopy. Knee joints of wildtype (WT) and cartilage-specific ERp57 KO mice (ERp57 cKO) were analyzed by indentation-type atomic force microscopy (IT-AFM), toluidine blue, and immunofluorescence/-histochemical staining. Apoptotic cell death was investigated by a TUNEL assay. Additionally, OA was induced via forced exercise on a treadmill. ER stress in chondrocytes resulted in a reduced compressive stiffness of knee cartilage. With ER stress, 18-month-old mice developed osteoarthritic cartilage degeneration with osteophyte formation in knee joints. These degenerative changes were preceded by apoptotic death in articular chondrocytes. Young mice were not susceptible to OA, even when subjected to forced exercise. This study demonstrates that ER stress induces the development of age-related knee osteoarthritis owing to a decreased protective function of the UPR in chondrocytes with increasing age, while apoptosis increases. Therefore, inhibition of ER stress appears to be an attractive therapeutic target for OA.     

Polymerization of isoprene in n-heptane with triethylaluminum–titanium tetrachloride catalyst. I. Effect of Al/Ti ratio on stereoregularity,conversion, molecular weight,and molecular weight distribution

The influence of the Al/Ti ratio of the heterogeneous Ziegler–Natta catalyst system AlEt₃–TiCl₄ on the isoprene polymerization in n-heptane at 30°C in a bench scale reactor was investigated. Each batch run consisted of 50 mL isoprene, 200 mL n-heptane with 0.45 and 0.5g catalyst. Conversion of isoprene and molecular weights of polyisoprene increased with increasing Al/Ti ratio, reaching their maxima values at 1.0 and 1.2, respectively. Conversion and molecular weights decreased remarkably at a higher ratio of Al/Ti. As this ratio decreases from the value of 1.2 to 0.4, the cis1,4 content in polyisoprene decreased from 97 to 25%. When the ratio of Al/Ti increased from 1.2 to 2.2 the cis-1,4 structure of polyisoprene decreased from 97 to 85%.