Correlation of Immunological and Histopathological Features with Gene Expression-Based Classifiers in Colon Cancer Patients

The purpose of this study was to evaluate the association between four distinct histopathological features: (1) tumor infiltrating lymphocytes, (2) mucinous differentiation, (3) tumor-stroma ratio, plus (4) tumor budding and two gene expression-based classifiers—(1) consensus molecular subtypes (CMS) plus (2) colorectal cancer intrinsic subtypes (CRIS). All four histopathological features were retrospectively scored on hematoxylin and eosin sections of the most invasive part of the primary tumor in 218 stage II and III colon cancer patients from two independent cohorts (AMC-AJCC-90 and AC-ICAM). RNA-based CMS and CRIS assignments were independently obtained for all patients. Contingency tables were constructed and a χ2 test was used to test for statistical significance. Odds ratios with 95% confidence intervals were calculated. The presence of tumor infiltrating lymphocytes and a mucinous phenotype (>50% mucinous surface area) were strongly correlated with CMS1 (p < 0.001 and p = 0.008) and CRIS-A (p = 0.006 and p < 0.001). The presence of mucus (≥ 10%) was associated with CMS3: mucus was present in 64.1% of all CMS3 tumors (p < 0.001). Although a clear association between tumor-stroma ratio and CMS4 was established in this study (p = 0.006), still 32 out of 61 (52.5%) CMS4 tumors were scored as stroma-low, indicating that CMS4 tumors cannot be identified solely based on stromal content. Higher budding counts were seen in CMS4 and CRIS-B tumors (p = 0.045 and p = 0.046). No other associations of the measured parameters were seen for any of the other CRIS subtypes. Our analysis revealed clear associations between histopathologic features and CMS or CRIS subtypes. However, identification of distinct molecular subtypes solely based on histopathology proved to be infeasible. Combining both molecular and morphologic features could potentially improve patient stratification.     

Spacer effects on in vivo properties of DOTA-conjugated dimeric [Tyr3]octreotate peptides synthesized by a "Cu(I)-click" and "sulfo-click" ligation method

We report on the SSTR2-binding properties of a series of four dimeric [Tyr3]octreotate analogues with different spacer lengths (nine, 19, 41, and 57 atoms) between the peptides. Two analogues (9 and 57 atoms) were selected as precursors for the design, synthesis, and biological evaluation of DOTA-conjugated dimeric [Tyr3]octreotate analogues for tumor targeting. These compounds were synthesized by using a two-stage click ligation procedure: a Cu(I) -catalyzed 1,3-dipolar cycloaddition ("copper-click" reaction) and a thio acid/sulfonyl azide amidation ("sulfo-click" reaction). The IC(50) values of these DOTA-conjugated [Tyr3]octreotate analogues were comparable, and internalization studies showed that the nine-atom (111) In-DOTA-labeled [Tyr3]octreotate dimer had rapid and high receptor binding. Biodistribution studies with BALB/c nude mice bearing subcutaneous AR42J tumors showed that the (111) In-labeled [Tyr3]octreotate dimer (nine atoms) had a high tumor uptake at 1 h p.i. (38.8 ± 8.3 % ID g(-1) ), and excellent tumor retention at 4 h p.i. (40.9 ± 2.5 % ID g(-1) ). However, the introduction of the extended hydrophilic 57 atoms spacer led to rapid clearance from the circulation; this limited tumor accumulation of the radiotracer (21.4 ± 4.9 % ID g(-1) at 1 h p.i.). These findings provide important insight on dimerization and spacer effects on the in vivo properties of DOTA-conjugated [Tyr3]octreotate dimers.     

Testing the validity of the spherical DEM model in simulating real granular screening processes

We investigate the flow of a granular material over a vibrated horizontal screen. We perform a direct quantitative comparison, across a range of operating conditions, between laboratory scale experiments and simulations using the discrete element method (DEM). We test the extent to which the commonly employed DEM approximation of particles being spherical affects the ability of the model to realistically reproduce the behaviour of industrial screening systems where the particles are generally non-spherical in shape.The simulation geometry and input particle size distribution are set up to exactly match the experimental system, which consists of a horizontal screen with a wire mesh cloth onto which quarry rock is fed at a series of input flow rates. The screen is vibrated, causing the granular bed to flow over the deck and vertically stratify with finer material passing through the screen, where it is collected in a series of bins located along the length of the screen. The size distribution of the material flowing through each section of the screen is found by analyzing the contents of each collection bin.The best agreement is found for very low flow rates, where the vast majority of the below aperture size material is rapidly captured just after it enters the screen in both the simulation and experiment. At higher flow rates, significant quantitative errors are found with the over-prediction of the flow rate through the screen for near grate sized particles. This is attributed to the higher rate of percolation through the bed and the easier capture by the screen surface of the spherical shaped material. The near aperture sized spherical particles also show a very strong tendency to peg the screen, becoming trapped in the screen openings and limiting further flow through those parts the screen. The use of spherical particles in the DEM simulation of vibrating screens is therefore found to be inadequate for modelling realistic flow and separation of particles that are not actually spherical.     

Glutathione-S-transferase M1 regulation of diesel exhaust particle-induced pro-inflammatory mediator expression in normal human bronchial epithelial cells

ABSTRACT: BACKGROUND: Diesel exhaust particles (DEP) contribute substantially to ambient particulate matter (PM) air pollution in urban areas. Inhalation of PM has been associated with increased incidence of lung disease in susceptible populations. We have demonstrated that the glutathione Stransferase M1 (GSTM1) null genotype could aggravate DEP-induced airway inflammation in human subjects. Given the critical role airway epithelial cells play in the pathogenesis of airway inflammation, we established the GSTM1 deficiency condition in primary bronchial epithelial cells from human volunteers with GSTM1 sufficient genotype (GSTM1+) using GSTM1 shRNA to determine whether GSTM1 deficiency could exaggerate DEP-induced expression of interleukin-8 (IL-8) and IL-1beta proteins. Furthermore, the mechanisms underlying GSTM1 regulation of DEP-induced IL-8 and IL-1beta expression were also investigated. METHODS: IL-8 and IL-1beta protein levels were measured using enzyme-linked immunosorbent assay. GSTM1 deficiency in primary human bronchial epithelial cells was achieved using lentiviral GSTM1 shRNA particles and verified using real-time polymerase chain reaction and immunoblotting. Intracellular reactive oxygen species (ROS) production was evaluated using flow cytometry. Phosphorylation of protein kinases was detected using immunoblotting. RESULTS: Exposure of primary human bronchial epithelial cells (GSTM1+) to 25-100 mug/ml DEP for 24 h significantly increased IL-8 and IL-1beta protein expression. Knockdown of GSTM1 in these cells further elevated DEP-induced IL-8 and IL-1beta expression, implying that GSTM1 deficiency aggravated DEP-induced pro-inflammatory response. DEP stimulation induced the phosphorylation of extracellular signal-regulated kinase (ERK) and Akt, the downstream kinase of phosphoinositide 3-kinase (PI3K), in GSTM1+ bronchial epithelial cells. Pharmacological inhibition of ERK kinase and PI3K activity blocked DEP-induced IL-8 and IL-1beta expression. DEP-induced ERK and Akt phosphorylation could be increased by GSTM1 knockdown. In addition, pretreatment of HBEC with the antioxidant N-acetyl cysteine significantly inhibited DEP-induced ERK and Akt phosphorylation, and subsequent IL-8 and IL-beta expression. CONCLUSION: GSTM1 regulates DEP-induced IL-8 and IL-1beta expression in primary human bronchial epithelial cells by modulation of ROS, ERK and Akt signaling.     

Introduction of a stabilizing 10 residue {beta}-hairpin in Bacillus subtilis neutral protease

A 10 residue ß-hairpin, which is characteristic ofthermostable Bacillus neutral proteases, was engineered intothe thermolabile neutral protease of Bacillus subtilis. Therecipient enzyme remained fully active after introduction ofthe loop. However, the mutant protein exhibited autocatalyticnicking and a 0.4°C decrease in thermostability. Two additionalpoint mutations designed to improve the interactions betweenthe enzyme surface and the introduced ß-hairpin resultedin reduced nicking and increased thermostability. After theintroduction of both additional mutations in the loopcontainingmutant, nicking was largely prevented and an increase in thermostabilityof 1.1°C was achieved.     

The effect of cavity-filling mutations on the thermostability of Bacillus stearothermophilus neutral protease

Cavities in the hydrophobic core of the neutral protease ofBacillus stearothermophilus were analyzed using a threedimensionalmodel that was inferred from the crystal structure of thermolysin,the highly homologous neutral protease of B.thermoproteolyticus(85% sequence identity). Site–directed mutagenesis wasused to fill some of these cavities, thereby improving hydrophobicpacking in the protein interior. The mutations had small effectson the thermostability, even after drastic changes, such asLeu284Trp and Met168Trp. The effects on T50, the temperatureat which 50% of the enzyme is irreversibly inactivated in 30min, ranged from 0.0 to +0.4°C. These results can be explainedby assuming that the mutations have positive and negative structuraleffects of approximately the same magnitude. Alternatively,it could be envisaged that the local unfolding steps, whichrender the enzyme susceptible towards autolysis and which arerate limiting in the process of thermal inactivation, are onlyslightly affected by alterations in the hydrophobic core.     

Uncertainties in the fate of nitrogen I: An overview of sources of uncertainty illustrated with a Dutch case study

This study focuses on the uncertainties in the fate of nitrogen (N) in the Netherlands. Nitrogen inputs into the Netherlands in products, by rivers, and by atmospheric deposition, and microbial and industrial fixation of atmospheric N₂ amount to about 4450 Gg N y^–1. About 60% of this N is transported out of the Netherlands in products. The fate of the remaining 40%, however, is less clear. We discuss uncertainties in losses to the atmosphere (as ammonia or through denitrification), by leaching and runoff, and in N accumulation in biomass and soils. These processes may account for the fate of about 40% of the N in the Netherlands, and for the fate of about 60% of the N in Dutch agricultural soils. Reducing uncertainties in the estimates of these fluxes is necessary for reducing the impact of excess N in the environment. In particular, monitoring the environmental effects of ammonia emissions and nitrate leaching to groundwater and aquatic systems requires an increased understanding of the fate of N. Uncertainties arise because (1) some N fluxes cannot be measured directly and are usually quantified indirectly as the balance in N budgets, (2) direct measurements of N fluxes have inevitable inaccuracies, (3) lack of experimental data and other information (e.g. statistics) needed for upscaling, (4) large spatial and temporal variability of fluxes, and (5) poor understanding of the processes involved. These uncertainties can be reduced by additional experimental studies and by further development of process-based models and N budget studies. We prioritize these future research needs according to a range of different criteria.     

Achieving flue gas desulphurization with membrane gas absorption

Membrane gas absorption (MGA) is an efficient and flexible way to carry out gas-liquid (G-L) contacting operations with hollow fibre membranes. The main advantages of membrane gas absorption over conventional G-L contactors is the compactness and low weight of the installation, the standard modular construction elements and the flexible operation. Gas and liquid flow can be controlled independently in the MGA process, which makes operation over a wide range of liquid and gas flow rates possible. In a MGA installation no entrainment, flooding, channelling or foaming occurs. Rob Klaassen and Albert E Jansen, TNO Environment, Energy and Process Innovation, discuss the principle of this technology, the benefits of newly developed membrane modules and their potential applications.     

Discovery of an Acyclic Nucleoside Phosphonate that Inhibits Mycobacterium tuberculosis ThyX Based on the Binding Mode of a 5‐Alkynyl Substrate Analogue

The urgent need for new antibiotics poses a challenge to target un(der)exploited vital cellular processes. Thymidylate biosynthesis is one such process due to its crucial role in DNA replication and repair. Thymidylate synthases (TS) catalyze a crucial step in the biosynthesis of thymidine 5‐triphosphate (TTP), an elementary building block required for DNA synthesis and repair. To date, TS inhibitors have only been successfully applied in anticancer therapy due to their lack of specificity for antimicrobial versus human enzymes. However, the discovery of a new family of TS enzymes (ThyX) in a range of pathogenic bacteria that is structurally and biochemically different from the “classic” TS (ThyA) has opened the possibility to develop selective ThyX inhibitors as potent antimicrobial drugs. Here, the interaction of the known inhibitor 5‐(3‐octanamidoprop‐1yn‐1yl)‐2′‐deoxyuridine‐5′‐monophosphate ( 1 ) with Mycobacterium tuberculosis ThyX enzyme is explored using molecular modeling starting from published crystal structures, with further confirmation through NMR experiments. While the deoxyuridylate (dUMP) moiety of compound 1 occupies the cavity of the natural substrate in ThyX, the rest of the ligand (the “5‐alkynyl tail”) extends to the outside of the enzyme between two of its four subunits. The hydrophobic pocket that accommodates the alkyl part of the tail is formed by displacement of Tyr 44.C, Tyr 108.A and Lys 165.A. Changes to the resonance of the Lys 165 NH₃ group upon ligand binding were monitored in a titration experiment by 2D HISQC NMR. Guided by the results of the modeling and NMR studies, and inspired by the success of acyclic antiviral nucleosides, compounds where a 5‐alkynyl uracyl moiety is coupled to an acyclic nucleoside phosphonate (ANP) were synthesized and evaluated. Of the compounds evaluated, sodium (6‐(5‐(3‐octanamidoprop‐1‐yn‐1‐yl)‐2,4‐dioxo‐3,4‐dihydropyrimidin‐1(2H)‐yl)hexyl)phosphonate ( 3 e ) exhibited 43 % of inhibitory effect on ThyX at 50 μM . While only modest activity was achieved, this is the first example of an ANP inhibiting ThyX, and these results can be used to further guide structural modifications to this class to develop more potent compounds with potential application as antibacterial agents acting through a novel mechanism of action.