Plastic Deformation and the Fracture Surface Energy of Sodium Chloride

A correlation between plastic deformation at crack tips in sodium chloride and the measured value of the fracture surface energy is presented. Plastic deformation can either aid or hinder crack growth, depending on the mode of deformation at the crack tip. If plane-stress deformation occurs, crack motion is hindered by step formation, dislocation generation, and plastic blunting of the crack tip. If plane-strain deformation occurs, crack motion is aided by stress fields that arise from the deformation. The specific surface free energy of sodium chloride, {100} plane, is estimated to be less than 0.37 J/m².     

Sulfur content of crude rapesseed oil from aqueous extraction

Dry heating of rapeseed before grinding increased the sulphur content of the crude rapeseed oil. Boiling the seeds in H₂O before grinding caused a slight decrease in the sulphur level of the oil. Control of pH during boiling of the ground rapeseed increased the sulphur content of the oil from ca. 2 ppm at pH 3.1 to ca. 10 ppm at pH 7.6.     

Special features in dyeing modacrylic fibre

Conclusions The possibility of dyeing freshly-spun modacrylic fibre with cationic dyes and in bulk with dyes or pigments of various classes has been investigated under laboratory conditions.It is recommended to use dyeing of modacrylic fibre in bulk with acetone-soluble dyes, which permits one to eliminate the energy-intensive process of pigment dispersion.Translated from Khimicheskie Volokna, No. 6, p. 36, November–December, 1988.     

Preparation of a microporous composite: Encapsulation of paper by polyethylene

A rapid polymerization method for in situ synthesis of polyethylene in a typical paper matrix of cellulose fibers is described. The unique properties of this double matrix, polyethylene in cellulose, are the result of performing the polymerization in a nonsolvent such that simultaneous polymerization and crystallization takes place yielding a nascent morphology. The morphology has been studied by scanning electron microscopy and was found to be different from what is usually obtained for melt crystallized polyolefins. Optical microscopy shows the polyethylene to be present as a complementary matrix with respect to the basic fiber construct. Mechanical, optical, and other properties of encapsulated filter paper have been measured using standard TAPPI tests. The results show a general improvement in physical properties for a range of “add ons” from 0 to 27%. Wet-strength and opacity undergo major changes.     

Development of high‐definition aqueous polyvinylpyrrolidone photoresists for cathode ray tubes

Aqueous photoresists that are capable of higher resolutions than are currently employed by the cathode ray tube (CRT) industry were developed by combining photoactivators, which activate at shorter UV wavelengths with polyvinylpyrrolidone (PVP). Two photoactivators were synthesized: 4,4′‐diazido‐2,2′‐biphenyl disodium disulfonate (DABP), which has a maximum absorbance at 264 nm, and 4,4′‐diazido‐2,2′‐biphenylethane disodium disulfonate (DABPE), which has a maximum absorbance at 258 nm. The PVP/DABP and PVP/DABPE photoresists successfully imaged a pattern with resolution as small as 4.4 μm with photoactivator concentrations greater than 20% of the PVP concentration. Addition of silane and emulgen greatly improved the performance of the photoresists with more uniform coatings of thicknesses of up to 1.4 μm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1637–1644, 2006     

Human interaction with policy flight simulators

Policy flight simulators are designed for the purpose of exploring alternative management policies at levels ranging from individual organizations to national strategy. This article focuses on how such simulators are developed and on the nature of how people interact with these simulators. These interactions almost always involve groups of people rather than individuals, often with different stakeholders in conflict about priorities and courses of action. The ways in which these interactions are framed and conducted are discussed, as well as the nature of typical results.     

Copper Complexes Obtained from the Schiff Base of Quinoline-2-Aldehyde and Aliphatic Diamines

Schiff base bis (2— quinolidene)- diamine gives a purple-red complex with copper ions with a λ_max at 530 mμ. The optimum pH for production of this complex is approximately 9.5. None of the metallic ions of the analytical groups II and III give rise to red complexes with the above Schiff base. Manganous (Mn²⁺) and stannous (Sn²⁺)ions as well as reducing agents such as hydrazine or hydroxylamine exert a catalytic effect on the rate of formation of these copper complexes. The thermal stability of the copper complex formed from the Schiff bases (2-quinoline-aldehyde with NH₂-(CH₂)_n-NH₂) is greater for diamine for which n = 4–6 than for n = 2–3.     

Non-markovian diffusion processes in polymers and a stretched exponential relaxation constitutive equation

Non-Markovian diffusion transport in polymers was studied. Applying the results of various researchers, a stretched exponential relaxation function was obtained and a linear viscoelastic constitutive equation formulated. Frequency dependent material functions, obtained from this constitutive equation were studied and the results successfully compared with experimental data for polyethylene oxide solutions. Sorption kinetics in a polymeric film were also studied. © 1994 John Wiley & Sons, Inc.     

Polyacrylic acid macromolecule—complexed zinc phosphate crystal conversion coatings

When water-soluble polyacrylic acid (PAA) macromolecules are introduced into zinc phosphating liquids, significant improvements in the yield of conventional zinc phosphate conversion films deposited on carbon steel surfaces are obtained. The improvements include controllability of crystal dimensions, degree of crystallinity, and coating weight. The conversion layer formed is a composite microstructure consisting of a bulk PAA polymer and complexed PAA continuously overlaying a uniform array of fine dense zinc phosphate crystals. Interfacial studies of the composite layer using infrared spectroscopy, energy-dispersive X-ray spectrometry associated with scanning electron microscopy, and X-ray photoelectron spectroscopy indicated that the functional carboxylic acid groups in the PAA molecules were strongly chemisorbed by the Zn atoms at the outermost surface sites of the crystal layers. The intermolecular bridging action of the surface Zn atoms which connect the PAA and the zinc phosphate crystal layers results in good adhesion at the PAA–crystal interfaces. In addition, the plasticized complex formation plays an essential role in increasing the stiffness and the ductility of the normally conventional crystal films. The flexibility of the complex coating surface and the thickness and surface roughness of the thin PAA overlayer all affect the adhesive force at the interface between the organic polymer topcoat and the complexed coating.     

Diels-alder adducts from safflower oil fatty acids: I. Maleic anhydride as dienophile

The Diels-Alder reaction between alkali conjugated and elaidinized safflower oil fatty acids and maleic anhydride was studied under various experimental conditions. The principal product which was obtained in 51–55% yields was a mixture of the adduct of maleic anhydride and maleic acid in 40∶60 proportions. The isolation and properties of this mixed adducts from the reaction mixture and their conversion to trimethyl, tributyl and triallyl esters are described. The trimethyl ester was also obtained in good yield from the methyl esters of the fatty acids and dimethyl maleate.