Effects of preparation conditions on the surface modification and performance of polyethersulfone ultrafiltration membranes

The impact that some membrane preparation steps had on ultrafiltration (UF) membrane characteristics and performance was studied. Polyethersulfone (PES) was employed as base polymer, while N‐methyl pyrrolidone (NMP) was used as a solvent, and polyvinylpyrrolidone (PVP) was used as a nonsolvent pore‐forming additive. The manufacturing variables studied were solvent evaporation time and membrane surface modification, using a fluorine‐based copolymer referred to as surface‐modifying macromolecule (SMM). The flat sheet membranes, prepared via phase inversion, were characterized using solute transport data, X‐ray photoelectron spectroscopy (XPS), and contact angle measurements. Membrane performance was evaluated via filtration test protocol that included a 6‐day filtration of concentrated river water. The flux reduction with time was modeled using single and dual mechanisms of fouling. The pore blockage/cake filtration model described better the behavior of the permeation rate along the experiments. Increasing the solvent evaporation time decreased the size of the pores and the permeation rate. However, it did not significantly affect the removal of the organic compounds naturally present in the river water used as feed. XPS and contact angle measurements proved that the short evaporation periods did not allow enough SMM migration to the surface to provoke a significant effect on the membrane performance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Variability for oil and fatty acid composition in castorbean varieties

Thirty-six castorbean varieties were surveyed for oil and fatty acid composition, in order to determine variability of these seed compounds. A large variability of seed oil percentage was observed, ranging from 39.6 to 59.5%. Concerning the fatty acids, little variability was observed for ricinoleic acid, which was the most abundant in the oil, ranging from 83.65 to 90.00%. The other fatty acids appeared in small concentrations and showed a small range: 0.87 to 2.35, 0.68 to 1.84, 2.96 to 5.64, 3.19 to 5.98, and 0.34 to 0.91%, for palmitic, stearic, oleic, linoleic, and linolenic acid, respectively. Non-significant correlations were observed between fatty acids and seed oil percentage. However, significant correlations were observed among fatty acid concentrations: positive and negative ones. These significant correlations could be associated with the biosynthetic pathways of the fatty acids, which are not fully elucidated. They suggest, however, that selection for a particular fatty acid will tend to increase those positively correlated, and decrease those negative ones. Selection and plant breeding techniques could then be applied to modify the oil content of the castorbean seeds, considering the variability observed. For the fatty acid composition, however, the variability was not large enough to make substantial changes in their concentrations by selection procedures. More varieties should be surveyed to find out if such variability is available.     

Analysis of surface integrity for minimum quantity lubricant—MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL.     

A pseudo-spectral scheme for the approximate solution of a time-fractional diffusion equation

We consider an initial-boundary-value problem for a time-fractional diffusion equation with initial condition u₀(x) and homogeneous Dirichlet boundary conditions in a bounded interval [0, L]. We study a semidiscrete approximation scheme based on the pseudo-spectral method on Chebyshev–Gauss–Lobatto nodes. In order to preserve the high accuracy of the spectral approximation we use an approach based on the evaluation of the Mittag-Leffler function on matrix arguments for the integration along the time variable. Some examples are presented and numerical experiments illustrate the effectiveness of the proposed approach.     

Statics Aware Grid Shells

We introduce a framework for the generation of polygonal gridshell architectural structures, whose topology is designed in order to excel in static performances. We start from the analysis of stress on the input surface and we use the resulting tensor field to induce an anisotropic nonEuclidean metric over it. This metric is derived by studying the relation between the stress tensor over a continuous shell and the optimal shape of polygons in a corresponding gridshell. Polygonal meshes with uniform density and isotropic cells under this metric exhibit variable density and anisotropy in Euclidean space, thus achieving a better distribution of the strain energy over their elements. Meshes are further optimized taking into account symmetry and regularity of cells to improve aesthetics. We experiment with quad meshes and hexdominant meshes, demonstrating that our gridshells achieve better static performances than stateoftheart gridshells.     

Portfolio approaches for constraint optimization problems

Within the Constraint Satisfaction Problems (CSP) context, a methodology that has proven to be particularly performant consists of using a portfolio of different constraint solvers. Nevertheless, comparatively few studies and investigations have been done in the world of Constraint Optimization Problems (COP). In this work, we provide a generalization to COP as well as an empirical evaluation of different state of the art existing CSP portfolio approaches properly adapted to deal with COP. The results obtained by measuring several evaluation metrics confirm the effectiveness of portfolios even in the optimization field, and could give rise to some interesting future research.     

Cross level semantic similarity: an evaluation framework for universal measures of similarity

Semantic similarity has typically been measured across items of approximately similar sizes. As a result, similarity measures have largely ignored the fact that different types of linguistic item can potentially have similar or even identical meanings, and therefore are designed to compare only one type of linguistic item. Furthermore, nearly all current similarity benchmarks within NLP contain pairs of approximately the same size, such as word or sentence pairs, preventing the evaluation of methods that are capable of comparing different sized items. To address this, we introduce a new semantic evaluation called cross-level semantic similarity (CLSS), which measures the degree to which the meaning of a larger linguistic item, such as a paragraph, is captured by a smaller item, such as a sentence. Our pilot CLSS task was presented as part of SemEval-2014, which attracted 19 teams who submitted 38 systems. CLSS data contains a rich mixture of pairs, spanning from paragraphs to word senses to fully evaluate similarity measures that are capable of comparing items of any type. Furthermore, data sources were drawn from diverse corpora beyond just newswire, including domain-specific texts and social media. We describe the annotation process and its challenges, including a comparison with crowdsourcing, and identify the factors that make the dataset a rigorous assessment of a method’s quality. Furthermore, we examine in detail the systems participating in the SemEval task to identify the common factors associated with high performance and which aspects proved difficult to all systems. Our findings demonstrate that CLSS poses a significant challenge for similarity methods and provides clear directions for future work on universal similarity methods that can compare any pair of items.     

Knowledge base support for dynamic information system management

Enterprise activities are governed by regulations and laws that are multiple, heterogeneous and not always easy to understand. The arising and/or the modification of these regulations and laws can cause a significant impact in the business context, especially in terms of enterprise information systems adaptation. Currently, there are many methodological and technological tools that facilitate the application of regulations and procedures, but they are not integrated enough to ensure a complete problem management. Therefore, they are not sufficient to support organizations and companies in the management of their business processes. In this paper we propose a methodological and technological solution, able to model, manage, execute and monitor business processes of complex domains. The system allows both the design of an information system and its prototyping as a web application, by the extension of an appropriately selected Business Process Management suite. During both the design and the usage phases of the prototyped information system, it is possible to interface with a knowledge base that contains information about regulations and aspects that characterize the enterprise (organizational chart, tasks, etc.).     

Titans’ revenge: Detecting Zeus via its own flaws

Malware is one of the main threats to the Internet security in general, and to commercial transactions in particular. However, given the high level of sophistication reached by malware (e.g. usage of encrypted payload and obfuscation techniques), malware detection tools and techniques still call for effective and efficient solutions. In this paper, we address a specific, dreadful, and widely diffused financial malware: Zeus.The contributions of this paper are manifold: first, we propose a technique to break the encrypted malware communications, extracting the keystream used to encrypt such communications; second, we provide a generalization of the proposed keystream extraction technique. Further, we propose Cronus, an IDS that specifically targets Zeus malware. The implementation of Cronus has been experimentally tested on a production network, and its high quality performance and effectiveness are discussed. Finally, we highlight some principles underlying malware—and Zeus in particular—that could pave the way for further investigation in this field.